径向位移用英语怎么说,径向位移的英文翻译


词语导航

基本信息

词语:径向位移

繁体:徑向位移

拼音:jìng xiàng wèi yí

英语翻译

【化】 radial displacement

相关词条

1.radialdispersion  

分词翻译

向的英语翻译:

always; at; be partial to; direction; face; out; to; toward
【医】 ad-; ak-; ob-

位移的英语翻译:

displacement
【计】 bit shift

翻译例句

1. 钢管的径向位移与荷载成正比;

The radial displacement of the steel tube keeps direct ratio with the load.

2. 径向位移必须伴有圆周力。

The radial displacement must be accompanied by a circumferential force.

3. 通过建立数学模型以消除叶片厚度引起的径向位移误差。

Set up the mathematic model of cover curve to avoid the radial displacement error which evocabled by the thickness of vane.

4. 刷式密封在转子瞬间大幅径向位移后可保持密封间隙不变。

Brush seals can remain seal clearances unchanged after rotor"s moment large scale radial moving.

5. 螺旋输送器的最大应力强度和最大径向位移均与转速近似地成二次方关系;

The max stress and the max radial displacement of conveyor is also proportional to the square of rotational speed.

6. 物料离心液压引起的最大应力和最大径向位移都随着转鼓壁厚的减小而增大。

With the decrease of thickness of drum wall, the maximum of stress and radial displacement created by materiel pressure increase.

7. 系统地分析了刀具转速和悬伸长度对立铣刀径向位移、最大等效应力的影响规律。

At the same time, the influence laws of the rotational speed and suspended stretch of the tools on the radial displacement and the maximum equivalent stress have been investigated in detail.

8. 对单列角接触轴承,径向额定负荷为引起轴承套圈彼此相对纯径向位移的负荷的径向分量。

On the single row angular contact bearings, radial load rating of bearing rings relative to each other purely radial displacement of the load of the radial component.

9. 并对现场埋设的管道进行静、动态应变测试,利用相应的标定方程获得特定点的径向位移。

The static and dynamic strain tests are made for the buried tube at the scene. With the corresponding calibrated equations, the diametric displacements at the particular points are obtained.

10. 经过一系列的实验测量与研究后,得出结论:用电涡流传感器对电机转子轴向与径向位移进行一体化测量时可行的。

After a series of experimental measurements and study, concluded: eddy current sensors on the rotor axial and radial displacement for integration measurements feasible.

11. 实时比较工件径向位移信号是否超出预设范围,同时参考刀具磨损方程的定量估计结果,决定是否送机床刀具补偿信号。

Comparing radius change of workpiece with limitation real time , at the same time taking into account the result of tool wear model to decide whether send offset signal to machine tool or not.

12. 这是5缸发动机径向具有相同位移的V型双如下。

This is a 5 cylinder radial engine that has the same displacement as the V-twin below.

13. 从结构、工作原理和安装定位方面,介绍了一种具有轴向位移补偿和径向支撑功能的动密封装置。

A type of dynamic seal device with functions of axial displacement compensation and radial support, is introduced from respects of structure, working principle and installment localization.

14. 研究了在均匀径向压力作用下圆柱正交异性复合厚壁圆筒的弹-塑性应力场和位移场。

The elastic-plastic stress and displacement fields of cylindrically orthotropic composite thick-walled tube under uniform radial pressure are studied.

15. 计算电磁力时,考虑了定子铁心的径向振动位移对电磁力的影响。

While calculating the electromagnetic forces, the effect of the radial vibration displacements of stator core on the electromagnetic forces is taked into account.

16. 第二步是以车轮的质量为目标函数,以车轮的应力、径向及横向位移为约束函数,以车轮辐板形状为设计变量进行设计。

The second step is taking the mass of wheel as target function. The stress, radial and cross displacement of wheel as restrain function, the spoke profile of wheel as design variable.

17. 无限延伸的土体介质片的位移函数沿竖向及径向取用解析函数,而沿周向采用分片多项式。

The displacement functions of infinite soil piece are given as the product of analytical functions in vertical and radial directions and piecewise polynomial in the angular direction.

18. 用增量值编程时,以径向实际位移量的二倍值表示,并附上方向符号(正向可以省略)。

When programming with incremental value, in radial direction, the displacement of two times the actual value, and the enclosed said direction signs (omit the positive).

19. 当有径向载荷作用时, 自主式轴承能抑制轴颈位移并因此使轴承获得无穷刚度。

When radial load is applied, the active bearing can surpress the displacement of the shaft, thus obtaining an infinite stiffness.

20. 在有限元模型中,分别计算了轮胎在受径向接触面力、切向接触面力和侧向接触面力时的位移频率响应。

The displacement frequency responses of the tires excited by, respectively, radial contact force, tangential contact force and lateral contact force are calculated using FEM.

21. 的径向的电位移是半径的线性函数。WwW.wENtIYI.COM

The radial electric displacement is a linear function with radius.

22. 其中,对于位移插值函数,令其多项式基比孔隙水压力的高一阶,而径向基阶数二者相同。

This method uses one-rank higher polynomial interpolation for displacement than that for pore water pressure, but the rank of radial basis for them is the same.

23. 该装置可承受各种离轴位移和径向力,从而提高了位置传感器的精度和使用寿命。

The device can be used for bearing various displacements off a shaft and radial forces, and thus a position sensor has the advantages of high precision and long service life.

24. 模拟结果表明:支架在膨胀过程中出现轴向缩短,且轴向缩短率随径向加载位移的增大而增大。

The simulations show that the length of the stent decreases fast with increasing displacement in the radial direction during the expansion.

25. 模拟结果表明:支架在膨胀过程中出现轴向缩短,且轴向缩短率随径向加载位移的增大而增大。

The simulations show that the length of the stent decreases fast with increasing displacement in the radial direction during the expansion.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!