工艺评定用英语怎么说,工艺评定的英文翻译


词语导航

基本信息

词语:工艺评定

繁体:工藝評定

拼音:gōng yì píng dìng

英语翻译

【化】 procedure qualification

分词翻译

工艺的英语翻译:

craft; technics; technology
【计】 MOS technology
【化】 methodology
【经】 technology

评定的英语翻译:

assess; evaluate; pass judgement on
【经】 assessment

翻译例句

1. 用于换热器的焊接工艺评定共有65项。

There are 65 items in total for welding processing evaluation of heat exchanger.

2. 介绍了产品焊接工艺评定和工艺规程的实施方法。

Introduce implementary methods of technologic evaluation and processing procedure for product welding.

3. 其中包括焊接工艺评定的试验方法、过程和结果。

It includes the testing method, the process and the result of welding procedure qualification.

4. 深入了解工艺评定对核岛主设备国产化具有重要意义。

Realizing process qualification assessment has important meaning to the domestic of nuclear island equipment.

5. 该软件适用于钢制压力容器焊接工艺评定的各项管理工作。

This software applies to manage welding procedure qualification for steel pressure vessels.

6. 文章对焊接工艺评定标准进行了深入探讨,提出一些建议。

A deep discussion on welding procedure qualification standard was made in this article, and some suggestion were put forward.

7. 介绍了动车组半永久车钩的焊接工艺及其工艺评定检测结果。

Described are the welding technology and its technology evaluation inspection result of the semi-permanent couplers on multiple units.

8. 工艺评定试验一般应在产品上进行,也可在相应的试块上进行。

Generally, the procedure qualification test shall be carried out on the product, or on the relevant test coupon.

9. 通过对焊接接头的综合力学性能研究,确定正确的焊接工艺评定。

Studying the weld joint"s comprehensive mechanical properties, establish the correct welding process evaluation.

10. 为确保产品的焊接质量,在正式焊接施工前必须进行焊接工艺评定。

To ensure the quality of welding products, welding procedure evaluation must be made before welding construction.

11. 在此基础上进行了焊接工艺评定,制定了碱蒸发器的焊接工艺规程。

Be base on the analysis above the welding procedure qualification report is done and the welding procedure specification on the alkali evaporator is established.

12. 焊接工艺评定试板和产品焊接试板,按标准要求都要进行弯曲试验。

According to the standard"s requirements, test piece for qualification of welding procedure and for product welding should be carried out various bending test.

13. 本文介绍了几种典型压力容器:球形容器、高压洗涤器的焊接工艺评定。

This paper introduces some welding procedure qualifications for spherical storage tanks, high pressure scrubbers.

14. 本文介绍了“压力容器焊接工艺评定计算机管理软件”的主要功能及特点。

The article introduce main function and characteristic of welding procedure qualification for steel pressure vessels computer management software.

15. 焊接工艺评定记录单上应包括封底焊时所用的惰性保护气体组成成分和流率。

The PQR shall include the composition and flow rate of the shielding and inert gas backing, when used.

16. 为避免夹渣的产生,在焊接P91焊口时,宜采用焊接工艺评定电流上限焊接。

In order to decrease weld defect, the upper limit welding current should be adopted.

17. 复合钢板经焊接工艺评定和抗氢剥离试验证明,该产品具有优良可靠的制造和使用性能。

Evaluation of welding process and hydrogen -resistant peeling test of the clad plate shows that this product possesses excellent, reliable manufacturing and operation properties.

18. 通过对新钢种的工艺评定,编制了合理的工艺规程,使压缩机低温钢焊接机壳获得成功。

By evaluating the technology of new steel type and compiling reasonable process procedure, welding casing made of low temperature steel has been achieved successfully.

19. 介绍采用药芯焊丝手工钨极氩弧焊焊接奥氏体不锈钢管道所进行的焊接试验及工艺评定。

The welding experiment and procedure qualification for manual TIG welding of stainless steel tubes with flux cored electrode is presented in this paper.

20. 采用了高质量焊接材料和适当的焊接规范参数范围,焊接工艺评定试验结果完全满足产品制造技术条件要求;

High quality welding material and suitable welding parameters were used for the welding procedure qualification test results fully meeting the requirement of the product manufacturing specification.

21. 它涵盖了工厂机车生产中所有焊接方法和原材料的焊接工艺评定资料,完全能够满足工厂在机车生产中的需要。

Including all welding processes and materials during production of locomotive, this system will completely meet the demands of welding production in locomotive manufacture.

22. 通过工艺方案选定和工艺评定试验,探索制订了最佳工艺参数,使焊接的高压汽水分离器筒体达到了质量要求。

After the selection of process scenario and process assessment test, the optimal process parameters are found and the welded cylinder of the high pressure separator satisfies the quality demands.

23. 根据钢制压力焊接工艺评定JB/T 4708-2000确定产品的焊接工艺评定项目,完成焊接工艺评定项目说明书。

Steel welding procedure qualification under the pressure of JB / T 4708-2000 determine the product of welding procedure qualification program, to complete the project welding procedure specification.

24. 先编制WPS,然后按WPS做焊接工艺评定,形成PQR报告,只有焊接工艺评定符合要求,WPS才能用在产品的焊接上。

First, prepare WPS, and then press WPS welding process evaluation, PQR report form, only the welding procedure qualification requirements, WPS can be used in the products of welding.

25. 采用正交设计和感官评定的方法,研制出复合汁饮料的生产工艺。

The processing technique for the mixed healthy beverage was studied through the orthogonal test and the sense assessment.

26. 采用齿廓统计分析方法对加工工艺系统进行识别,可为齿轮质量的评定与控制提供更科学且易于操作的手段。

By means of gear profile statistics to conduct the identification of gear manufacturing process system, a scientific and easy-operation method to assess and control gear quality is provided.

27. 应用所得JR阻力曲线对合金钢的断裂韧度的评定表明了热处理工艺的影响。

Evaluation of fracture toughness of the alloy steel by the JR resistance curve shows the influence of heat treatment technology.

28. 本文介绍了振动时效技术的机理、特点、工艺以及时效效果的评定方法。

The mechanism, features, process and evaluation way in result of vibratory stress relief method in production have been introduced.

29. 经过综合评定,确定了最佳方案,并给出了相关的结构工艺参数。

By comprehensive assessing, the best plan was decided and the relevant structure processing parameters were given.

30. 经过综合评定,确定了最佳方案,并给出了相关的结构工艺参数。WWW.WENTiyI.CoM

By comprehensive assessing, the best plan was decided and the relevant structure processing parameters were given.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!