负载调整用英语怎么说,负载调整的英文翻译


词语导航

基本信息

词语:负载调整

繁体:負載調整

拼音:fù zǎi tiáo zhěng

英语翻译

【电】 load regulation

分词翻译

负载的英语翻译:

load
【计】 L; load line
【化】 load

调整的英语翻译:

adjust; modulate; rectify; regularize; regulate; revise; tune
【计】 annealing; clean-up; justification; levelling; reconditioning
regulation; tuning
【化】 setting
【医】 adjustment; modulation; rectification; regulation
【经】 modulation

翻译例句

1. 更好的负载调整及稳定。

Better load regulation and stability.

2. 确定队列顺序的负载调整、队列号等算法等。

The queue sorting algorithms include load adjustment and sequence number scheduling.

3. 此转换器的负载调整率在没有负反馈环路的时候也相当好。

The load regulation is also good even without a negative feedback loop.

4. 与传统方法相比,该方法具有电压纹波小、负载调整率和电压调整率低的特点。

Compared with traditional circuit, it has lower output voltage ripple, lower load adjustment rate and lower input voltage adjustment rate.

5. 电流控制型白光led驱动电路因为线性调整率和负载调整率非常好的优点成为目前设计的热点。

Current controlling mode white LED driver is hotspot because of its good line regulation and load regulation.

6. 实验测试结果表明:所设计的电源具有稳压性能优良,纹波小,电压调整率、负载调整率高等优点。

Test results show that the designed power supply has good voltage regulation performance, with small ripple and high regulation rate of voltage and load.

7. daytime和nighttime参数的值的范围为0到10;客户可以根据他们的工作负载调整该值。

The value scope for the daytime and nighttime parameters ranges from 0 to 10; customers can adjust the value according to their workload.

8. 实验测试结果表明:所设计的电源具有较好优良的稳压性能,以及电压纹波小、负载调整率和电压调整率低的特点。

Test results show that the designed power supply has good voltage regulation performance, and it has lower output voltage ripple, lower load adjustment rate and lower input voltage adjustment rate.

9. 实验结果表明,该开关稳压电源具有频响快、电压调整率和负载调整率高的特点,是一种性能较好的开关稳压电源。

Test results show that the designed power supply has good voltage regulation performance, with small ripple and high regulation rate of voltage and load.

10. 它能够提供1.5A的持续输出能力,并且能在较宽的输入电压范围内,保证很好的负载调整率和电源线性调整率。

It achieves 1.5A continuous output current over a wide input supply range with excellent load and line regulation.

11. 通过更改工作负载概要调整每个服务区域的工作线程数量。

Adjust number of worker threads for each servant region by changing the workload profile.

12. 这种技术会动态地调整分配的处理器数量,尽可能与工作负载匹配。

This is a technique that dynamically adjusts the amount of processors dispatched, which try to match the workload.

13. 您应该经常手动地调整用户和数据库的分配,以确保负载的平均分配。

You should manually adjust the distribution of users and databases on a regular basis to ensure an even distribution.

14. 您可以完全控制进行下一次轮询的时间,因此完全有可能调整服务器负载应增加的值。

You have full control over when the next polling occurs, so it"s possible to trim the values should the load on the server increase.

15. 这一版中,这个概念没有变,但是现在您可以通过克隆或删除单个虚拟机根据不断变化的工作负载需求进行调整。

This same concept still holds true, but you can now react to changing workload demands by either cloning or deleting individual virtual machines.

16. 如果您认为缺省值不够大,那么建议您从3开始进行调整,在3的附近尝试以查看性能对工作负载的影响。

If you believe the default value is not adequate, then it is recommended that you start with 3, and move it up and down to see the performance impact on your workload.

17. 在管理的环境下,将提出负载平衡及性能调整,用于。

In a managed environment, load balancing and performance tuning will have to be addressed for.

18. util_impact_lim参数是指允许所有已调整实用程序对于实例的工作负载产生影响的百分比。

The util_impact_lim parameter is the percentage of allowable impact that all throttled utilities can have on the instance workload.

19. 例如,如果将util_impact _ lim设置为10,那么已调整的RUNSTATS调用就被限定在消耗10%以下的工作负载。

If for example, the util_impact_lim is set to10, then a throttled RUNSTATS invocation is limited to consume not more than 10 percent of the workload.

20. 我们可以让AIXPOWER系统根据工作负载和需要自动地调整内存分配。

WE can let our AIX POWER systems automatically adjust memory allocation based on workload and demand.

21. 从性能角度来说,设备的硬件和软件一起进行调整以获取您特定负载下的最优性能。

From a performance perspective, the appliance hardware and software is tuned together for optimal performance of your specific workload.

22. 简而言之,应该研究系统的工作负载,然后调整参数,这是高效地使用系统资源的关键。

In short, tuning the parameters after identifying the workload of the system is the key to the efficient usage of system resources.

23. 配置测试计划来产生状态稳定的工作负载,或者通过调整多个虚拟机组之间的负载来产生变化。

The test plan can be configured to produce a steady-state workload or to introduce variability by alternating the load between multiple virtual machine groups.

24. 这一工作负载的最佳性能需要充分调整和优化硬件及软件系统。

Optimal performance of this workload requires that the hardware and software systems be fully tuned and optimized.

25. 于是DB2将调整BACKUP的可用资源,这样,对生产工作负载的平均影响就会是30%。

DB2 would then adjust the resources available to BACKUP such that the average impact to your production workload was 30%.

26. AIX7会根据逻辑分区的工作负载和配置自动地调整这两个池的大小。

AIX 7 automatically adjusts the size of the two pools according to the workload and configuration of the logical partition.

27. 调整架构可能是一项富有挑战的任务,需要预计系统整体工作负载方面的知识。wWW.WentIyi.coM

Sizing the architecture can be a challenging task requiring knowledge of expected system overall workload.

28. PowerVM提供根据工作负载需求动态调整系统资源的功能,这样每一个分区都能够获得所需的资源。

PowerVM offers the capability to dynamically adjust system resources based on workload demands so that each partition gets the resources it needs.

29. 根据电机的类型和电机的负载不同设定时间也不同,通过进行实验进行调整。

These time Settings vary depending on the motor type and motor loading, so that they should be adjusted experimentally.

30. 选择调整负载的选项将得到不同的行动路线;在这种情况下,将启动Design Advisor。

Selecting the option to tune the workload would result in a different course of action; in this case, it would launch the Design Advisor.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!