
词语导航
基本信息
词语:泡沫试验
繁体:泡沫試驗
拼音:pào mò shì yàn
英语翻译
【医】 fluorescent tests
分词翻译
泡沫的英语翻译:
bubble; foam; froth; scum; spume; suds
【化】 foam; froth
【医】 foam; froth; scum
试验的英语翻译:
experiment; test; try; try on; try out; examination; experimentation; trial
trial run
【计】 breadboarding
【医】 probation; test; tria
【经】 test; trial
翻译例句
1. 目的探讨羊水泡沫试验对胎儿肺成熟度预测的临床应用价值。
Objective To explore clinic value of foam test of amniotic fluid in high risk pregnancy of obstetrical department.
2. 结论羊水泡沫试验简便易行,其预报胎儿肺成熟的价值能够代替L/S比值测定。
Conclusion The foam test of amniotic fluid is simple and easy. It"s forecast value in the fetus"lung maturation can replace L/S rate.
3. 比如泰国正在试验漂流屋,洪水来临时,这些置于泡沫浮舟上的漂流屋可以漂浮在水面。
Thailand, for instance, is experimenting with floating homes that can rise up above the waters on pontoons filled with styrofoam.
4. 通过对现场试验的成果总结,对UT - 6型泡沫棒在鄂尔多斯盆地天然气藏的使用方式进行了描述,并对其效果进行了分析。
Through summarizing the results of scene test, the mode of using UT-6 foam stick is described in natural gas reservoir of Ordos Basin, and the effect of it is analyzed.
5. 通过大量的室内试验,优选出c 12泡沫泥浆的优质配方,现场施工中顺利解决了强裂隙漏失地层中的钻进问题。
Through laboratory tests, high quality formula of C12 foam mud was optimized, which made the drilling construction successful in serious fracture leakage formation.
6. 试验结果分析表明,内注泡沫混凝土的空心砌块,能提高墙体的开裂荷载和极限荷载,改善了混凝土空心砌块砌体的抗剪承载力。
The analysis of the test results show that the masonry wall filled with foaming concrete can increase cracking-resistance, and load-bearing capacity, and improve strength of walls".
7. 试验结果表明,天然乳胶和聚氨基甲酸乙酯泡沫床垫燃烧得最快。
The results of the tests indicated that latex and polyurethane foam mattresses burned fastest.
8. 在综述文献及试验的基础上,介绍了以热电厂中空干灰为原料制作PVC绝热材料及EVA泡沫材料的配方和所得产品的性能。
Based on our experiments and stating references, this paper introduced the formulation of making PVC insulation materials and EVA foam by dry cenospheres and the properties of these products.
9. 通过长细管模型进行了注入泡沫流体在孔隙介质中的流动试验。
The experiment is conducted to test the flowing characteristics of the foam fluid in porous media injected by the long slim tube model.
10. 通过试验方法研究了泡沫铝填充薄壁金属管塑性变形缓冲器在准静态作用下的吸能特性。
Energy absorption characteristic of a plastic deformation energy absorber filled with aluminum foam in a thin-wall metal tube under quasi-static state was studied by test method.
11. 在分析泡沫材料动力学特性的基础上,利用试验方法对缓冲垫的缓冲性能进行了分析和评价。
Based on the analysis of the dynamic characteristic of the EPS, the performance is analysised and evaluated by the experimental methods.
12. 采用施工现场混凝土立方体非绝热温升试验和反演分析相结合的方法,对聚苯乙烯泡沫塑料板外贴法的保温能力进行分析研究。
With an approach of combination of thermal rising test of cubic block in-situ and back analysis, the thermal retardation capability of polystyrene foam board is analyzed.
13. 对铝合金熔融发泡工艺进行了研究,用火山灰作发泡剂、用钙为增粘剂。通过试验,认为用此法制造泡沫金属是可行的。
This paper researches on the foaming procedure of aluminum alloy in molten state and believes that the procedure is feasible for making foam metals.
14. 为此,研制开发了密度低、强度大且防窜性能好的新型泡沫水泥浆体系,并对其性能进行了试验研究。
In order to solve the problems, a novel foam cement slurry system with low density, high strength and good channeling resistance, has been developed and tested.
15. 现场单井试验结果表明,强化泡沫体系在三次采油领域具有较好的应用前景。
Result of single well field test indicates that the system of tertiary EOR has better application prospects.
16. 对泡沫塑料吸附中杂质、吸附条件等进行试验,选择了较好的仪器及工作条件。
After the testing on adsorption of impurity by polyfoam and adsorption conditions, the ideal working condition was determined for the analytical instrument.
17. 对其中最主要的两项技术——蒸汽吞吐同时添加薄膜扩散齐和泡沫蒸汽驱的现场试验结果与经济效益进行了较详细的叙述。
The results of field tests and economic data of two important techniques, cyclic steam injection with addition of TFSA (thin film spreading agents) and foam steam flooding, are described in detail.
18. 介绍了固体火箭发动机喷管硬质泡沫塑料堵盖的设计方法与试验过程。
Design methods and test process of nozzle closure made of hard foamed plastics for SRM are introduced.
19. 首先讨论了泡沫金属材料的特点和力学性能,并对七种不同的泡沫铝材料分别进行了准静态和动态压缩试验。
First the characteristics and mechanical properties of mental foams were discussed. Quasi-static and dynamic compressive tests were carried out on seven different aluminum foam materials.
20. 通过现场试验,优化了聚氨酯泡沫原料配比,确定了合理的聚氨酯泡沫喷涂施工工艺。
Through field test, polyurethane foam raw material match has been optimized & reasonable polyurethane foam spray construction technology has been determined.
21. 采用自制的试验装置对泡沫铝与实体铝复合结构的隔声性能作了研究。
The sound insulation property of aluminum foam(Al-foam) with composite structure was studied using a self-made equipment and sound detector.
22. 同时,为测试本新型泡沫摇摇机之性能,本试验选用不易溶解且比重较大之芋头粉作为测试的对象。
In order to realize the performance of new type foam-shaking machine, the taros power is selected in this experiment.
23. 通过充填聚氨酯泡沫的薄壁金属圆筒的力学性能试验,研究薄壁金属圆筒内充填聚氨酯泡沫的作用和效果。
Based on the mechanical property test on the thin wall metal cylinder filled with polyurethane foam, the effects of polyurethane foam filling in the wall metal cylinder are studied.
24. 该文介绍了空气泡沫驱油机理、泡沫液配方、试验井组的优选及在百色油田灰岩油藏的现场试验。
The paper presents the mechanism of air foam oil displacement, foam liquid formula, testing well group optimization, and field test in calcareous rock of Baise oilfield.
25. 试验结果表明,上压渗流法制备的泡沫铝样品的综合性能,与日本的FALSOAB样品的性能相当。
The results showed that the comprehensive properties of new foam aluminium material are very similar to those of Japan FALSOAB"s.
26. 在非均质模型驱油试验中,提高采收率26%,为泡沫驱油的现场试验提供了有利依据。
The oil recovery was enhanced by 26 % in heterogeneous model flooding test. Useful data were provided for foam flooding in field test.
27. 采用纯度为98%的正21烷(C21H44)作为相变材料(PCM),通过抽真空灌注的方法将其灌注到泡沫铜内部,封装并作绝热处理后作为试验件。WWw.WENtIyI.coM
The 98% pure Heneicosane(C21H44) was used as the phase change material(PCM), and it was filled in the copper foam through a vacuuming procedure.
28. 分别用混凝沉降、泡沫分离、活性炭吸附工艺进行了合成洗涤剂生产废水的处理试验。
Coagulation, foam fractionation and activated carbon adsorption for treating synthetic detergent waste-water have been studied.
29. 对硅橡胶泡沫材料进行了45%应变压缩状态下的热老化试验研究。
The temperature ageing tests have been applied to silicone rubber foam materials which in 45% strain compressive status.
30. 随后又对工程化试验中泡沫铝中存在的缺陷产生的原因进行了分析并探讨了解决缺陷的办法。
The reason of cause disfigurement during semi-industry experimentation was analyzed and method of resolving the disfigurement was discussed later.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
