
词语导航
基本信息
词语:螺纹法兰
繁体:螺紋法蘭
拼音:luó wén fǎ lán
英语翻译
【化】 screw flange; screwed flange; threaded flange
分词翻译
螺纹的英语翻译:
screw thread; whorl; worm
【机】 screw thread; thread
法兰的英语翻译:
flange
【化】 flanch; flange
翻译例句
1. 通过强度校核,证明此种螺纹法兰安全可靠。
Strength check proves this threaded flange safe and reliable.
2. 传感器采用贴面形式安装在物体表面,固定形式为螺纹或法兰,并确保与设备表面接触严密。
The sensor shall be mounted on object surface, by fixation of screw thread or flange, and ensure firm contact with the equipment surface.
3. 采用螺纹或法兰毛细管联接。
Using thread or flange capillary connection.
4. 暴露的法兰面和管螺纹应保护好,以避免受到化学溶剂的腐蚀。
Exposed flange faces and pipe threads shall be protected from chemical solutions.
5. 如指定使用外螺纹及内螺纹或榫面及槽面法兰,容器设备口法兰端面应为凹槽型。
When male and female (M&F) or tongue and groove (T&G) type flanges are specified, the nozzle flange facing of the vessel shall be of female or groove type.
6. 加氢装置用双壳程换热器分为法兰式和螺纹锁紧环式两种。
The double shell side heat exchanger for use in hydrogenated unit is divided into two kinds of flange type and thread lock ring type.
7. 螺纹,法兰和焊接等连接方式,耐腐蚀并内置过滤器。
Threaded, flanged and welding connections, corrosion and built-in filter.
8. 钢塑连接:可采用法兰、螺纹丝扣等方法连接。
Plastic Steel Connections: may adopt the connecting method as flange, screw threaded etc.
9. 连接端口-可提供法兰、螺纹或焊接连接端口供用户选择。
End Connections - choice of flanged, threaded or socket weld ends.
10. 该接头也许是用螺纹与套管连接在一起,或焊接在一起,以及可能还有一个法兰或卡箍连接与防喷器组或井口配接。
This adapter may be threaded or welded onto the casing, and may have a flanged or clamped connection to match the BOP stack or wellhead.
11. 设计了能在高辐射环境下工作的、全自动检查核电站反应堆压力壳连接处法兰面主螺栓孔螺纹表面缺陷的设备,解决了自动小车的设备承载和准确定位问题。
To inspect the defects on the screw hole surfaces of nuclear reactor pressure vessel in nuclear power station, an automatic moving table was designed to carry sophisticated inspecting devices.
12. 同时,端部法兰和顶盖骑缝中的螺纹孔可以一次性加工完成,加工制造简单方便。
At the same time, the high-neck flange and the cap straddle the screw hole can be completed a one-time processing, manufacturing is simple and convenient.
13. 组件所有外露接口均设有防护堵、盖,且封闭良好,接口螺纹和法兰密封面无损伤;WWw.WeNtiyI.coM
All accessory interfaces should have protection covers with good sealing, there is no damage on the connecting screws and flange sealing surface.
14. 按连接方工可分为螺纹式连接、法兰连接和焊接式三种。
By connecting work can be divided into the thread side connections, flange connections and welding-type three.
15. DEUBLIN Barco摆动式旋转接头类型可供选择:螺纹,焊接和法兰连接到适合您的各种现场应用。
Available in three types: threaded, welded and flanged to suit your application.
16. 连接端口-可提供法兰、螺纹或焊接连接端口供用户选择。
End Connections? Choice of flanged, threaded or socket weld ends.
17. 翼缘法兰螺栓应为双头螺栓,螺纹为全长型,内径600mm或以下的法兰的螺栓至少为m 16,内径600 mm以上的法兰的螺栓至少为m 20。
Girth flange bolting shall be of stud bolt type, threaded full length, and at least M16 for flange of 600 mm and smaller inside diameter and at least M20 for over 600 mm inside diameter flange.
18. PVC采用溶剂粘结、螺纹或法兰连接方式。
PVC is joined by solvent cementing, threading, or flanging.
19. 防喷管线应采用螺纹与标准法兰连接,不允许现场焊接。
Blowout preventing lines shall be connected by threads and standard flanges, and on site welding is forbidden. Field welding is not permitted.
20. 分螺纹连接、法兰连接二种,顶部有大小口结构两种,大口结构有利于皮囊更换。
Of threaded connections. Flanged two kinds, the top structure of the two size mouth, big mouth structure is conducive to bladder replacement.
21. 分螺纹连接、法兰连接二种,顶部有大小口结构两种,大口结构有利于皮囊更换。
Of threaded connections. Flanged two kinds, the top structure of the two size mouth, big mouth structure is conducive to bladder replacement.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
