词语导航
基本信息
词语：固化温度
繁体：固化溫度
拼音：gù huà wēn dù
英语翻译
【机】 curing temperature
相关词条
1.temperatureofsolidification 2.solidificationtemperature分词翻译
固化的英语翻译：
solidify【计】 hardening
【化】 cure; curing
【医】 solidification; solidify
温度的英语翻译：
temperature【化】 temperature
【医】 T; temperature
翻译例句
1. 我们发现收缩应力随固化温度直线增加。
Shrinkage stress was found to increase linearly with cure temperature.
2. 钡酚醛树脂固化温度比普通酚醛树脂低；
Barium PF resin cure temperature is lower than that of ordinary PF resin.
3. 树脂的互穿程度直接受初始固化温度的控制。
The interpenetrating degree was controled by the thermosetting temperature.
4. 液体酚醛树脂的固化温度稍低于粉状酚醛树脂。
The curing temperature of the liquid phenolic resin was slightly lower than that of powder phenolic resin.
5. 膜的反射率先随着固化温度的升高逐渐升高，而后又降低。
Reflectivity of PDCLC films is up first and down later with UV cure temperature increasing.
6. 并且苯并恶嗪的固化温度越高，时间越长，体积膨胀效应就越大。
The higher the temperature is, the longer cure time is, the larger volumetric expansion will be.
7. 在固化工艺方面，研究了固化剂含量和固化温度对于凝胶时间的影响。
As for curing process, the influence of dosage of curing agent and curing temperature on gel time was investigated.
8. 这可能是在做往复螺杆机，其中一名主管在一个时间是带来的固化温度。
This may be done in a reciprocating screw machine where one charge at a time is brought to curing temperature.
9. 磷酸盐基具有固化温度低，剪切强度高，电性能和耐热性能优异等特点。
Phosphate adhesives have many advantages, such as low temperature curing, high shear strength, and excellent electric and heat-resistant properties.
10. UP树脂固化温度是随时间变化的，这个变化的关系，目前尚无数学表达式；
The solidification temperature of UP resin changes when time changes. As for the relation between them, at present a mathematic formula can′t be found.
11. 这些交联剂于正常槽液温度下在水中很稳定，但在固化温度下就变得活泼起来。
These crosslinkers are stable in water at normal bath temperature but become reactive at curing temperatures.
12. 树脂的介电性能与树脂体系的催化剂含量、固化温度和增韧剂含量有较大关系。
The dielectric performance of the modified resin system is remarkably influenced by the concentration of catalysis, the cure temperature and toughening agent.
13. 冷却固化温度低，得到的固体颗粒结构致密，颗粒提纯速率较慢，但产品收率较高。
The structure of pastilles was more compact and the pastille purification rate was slower at lower solidification temperature, however the yield of pastilles was higher.
14. 本发明解决了目前磷酸铝类材料固化温度高，或磷酸铬铝类材料中铬有致癌性的问题。
The invention solves the problems of high curing temperature of the prior aluminum phosphate material or the carcinogenicity of chrome in a chrome and aluminum phosphate material.
15. 适形材料在降低固化温度和延长适用期方面有显著成效，已成为完善的电机用新型材料。
The conformable material has notable effects such as for decrease of curing temperature and prolong of store life as well as becomes perfect new material to electric machine.
16. 评价了固化时间、固化温度、催化剂的类型和用量以及不同粒径石英砂等因素对固砂效果的影响。
The effects of solidification time and temperature, types and amount of catalyst, and different grain sizes of quartz sand on sand consolidation effectiveness are discussed.
17. 板坯初始温度的高低对干法纤维板中心层到达胶粘剂固化温度所需加热时间的影响可以忽略不计；
The influence of the original temperature of mat, high or low, to the time spent to heat the center layer to the curing temperature could be neglected;
18. 根据温度的高低，一个自动化的系统则可以调整微波的功率输出，以便达到相对恒定的固化温度。
An automated system can then adjust the power output of the microwave so that a fairly constant curing temperature can be maintained.
19. 环氧树脂与改性液体酸酐体系的凝胶时间与环氧树脂的结构与组成、固化温度及促进剂等因素有关；
The gelation time of this epoxy resin with modified liquid anhydride was related to the chemical structure and the composition of epoxy resin, curing temperature and accelerator.
20. 实验结果表明，所制备的纳米复合涂料具有固化温度低、涂装方便、力学性能及抗腐蚀性优越等特点。
The experiment results indicated that the complex coating has the advantage of low curing temperature, construction convenient and high mechanics performance and anti-corroding performance.
21. 提出了选择固化温度的原则，以及三种不同树脂固化体系粘度随固化温度、固化时间变化的函数关系。
The author proposed the principle to select the curing temperature and functional relations of the viscosity with curing temperature and time for three different resin systems.
22. 在不同的进料浓度，固化温度，颗粒直径情况下，提高发汗温度，对颗粒纯度和收率的影响是不同的。
Improving sweating temperature in different raw material concentration, solidificaton temperature and pastille diameter, the influence on the purification and yiled of pastille was different.
23. 探讨了固化温度、固化时间、耐介质性、携砂液的种类和用量以及支撑剂粒径等对纤维复合防砂体的影响。
Effect of curing temperature, curing time, resistance to media, kind and volume of the sand-laden fluid, and particle size of proppant on fibre compound sand control system were discussed.
24. 本文就模压料在模具中加热过程和达到固化温度以后的传热过程进行定量分析，以确定合理的工艺控制参数。
In order to determine reasonable processing parameters, heating of thermosetting molding compound in the mold and that of heat transfer after curing temperature are analyzed.
25. 并模拟实际固化温度历程，采用测定不同固化阶段样品残余反应热的方法对固化反应动力学方程进行了验证。
By simulating practical temperature procedure of curing, the cure kinetic equations were verified by means of determining the residual heat of reaction of samples with different cure degrees.
26. 研究了工艺条件(不同固化温度、固化时间和初始反应温度)以及浇注成型产生的缺陷对聚氨酯弹性体力学性能的影响。
Effects of process conditions such as different curing temperature, curing time, starting reaction temperature and casting flaw on polyurethane elastomers mechanical properties are investigated.
27. 进行了环氧沥青混合料目标配合比设计，确定了矿料的级配范围、混合料的最佳油石比以及高温固化温度、时间等参数。
Then, it makes target mixture proportion design to study on the aggregate scope, optimum asphalt content of mixture, the temperature and time of curing.
28. 而且随着固化温度的提高，胶粘剂体系的固化速度和固化程度还会进一步增加，力学性能、粘结性及耐热性能也会进一步提高。wwW.WeNTIyi.coM
As the hardening temperature increases, the speed hardening and degree of the adhesive JD increase, the mechanical and adhesion performances of the adhesive systems can be further improved.
29. 而且随着固化温度的提高，胶粘剂体系的固化速度和固化程度还会进一步增加，力学性能、粘结性及耐热性能也会进一步提高。
As the hardening temperature increases, the speed hardening and degree of the adhesive JD increase, the mechanical and adhesion performances of the adhesive systems can be further improved.
版权声明：问题易所有作品（图文、音视频）均来源网络，版权归原创作者所有，与本站立场无关，如不慎侵犯了你的权益，请联系我们告知，我们将做删除处理！