
词语导航
基本信息
词语:封胶
繁体:封膠
拼音:fēng jiāo
英语翻译
【电】 sealing compound
分词翻译
封的英语翻译:
envelop; seal【经】 seals
胶的英语翻译:
glue; gluey; mucus; pastern; sticky【医】 gloea; glue
翻译例句
1. 高透明室温硫化有机硅电子灌封胶;
High transparency room temperature vulcanizing potting silicone gelatine;
2. 注意,封胶其实是很软的,并不是硬塑料。
Note that the glue is quite gooey and not of the hard kind.
3. 环氧树脂灌封胶在电子电器工业领域应用广泛。
The epoxy resin sealant has extensive application in the electronic and electrical equipment industry.
4. 封密封胶后使用。
Seal the sealant after use.
5. 封装结构的模态频率随着灌封胶弹性模量的增大而增大。
The modal frequency of the packaging structure increases with the elastic modulus of potting material.
6. 选用聚合物H和改性异氰酸酯K为主要原料合成聚氨酯灌封胶。
Polyurethane (PU) pouring sealant was synthesized with polymer H and modified isocyanate K as basic materials.
7. 其结构由壳体、全封总成、悬挂器总成、自封胶芯总成四部分构成。
The structure consists of four parts : shell, whole seal assembly, hanger assembly, self seal rubber core assembly.
8. 研制了低黏度环氧灌封胶,进行了配方优化,测试了其力学性能和电性能。
A kind of epoxy pouring sealant was prepared. Its formulation was optimized. The electrical and mechanical properties were determined.
9. 此课题还针对封胶工艺不良产生及解决方法进行了深入的理论和试验研究。
The study has looked further into those production defectives related issues and reason behind the problems.
10. 考察了扩链剂种类、活性稀释剂及异氰酸酯对聚氨酯灌封胶力学性能的影响。
The effect of kinds of chain extender, active diluents and the structure of isocyanate on mechanical properties of the elastomer is discussed.
11. 灯具使用PVC外壳,隔热、防潮、防腐蚀,经久耐用,采用透明的环氧树脂封胶。
Our LED lights use the PVC casing, which is anti-heat, anti-moisture, anti-corrosion, durable, and use the transparent epoxy glue for sealing.wwW.WENtiyi.COM
12. 本研究采用丙烯酸酯单体聚合制成一种全新的合成冷封胶。介绍了制备方法和有关性能。
The preparation process and the related properties of the cold-seal adhesive polymerized from acrylate monomers were included in the paper.
13. 采用封胶的方式限制开裂位置在封胶区间的可能,提高开裂发生在没有封胶区间的概率。
Possibility of racking position in the sealant region is avoided by the sealing glue, and probability of racking position in the region without the sealing glue is increased.
14. 线路板封胶机是对加工好的线路板浸泡特殊胶水然后淋干烘干的机器,是线路板做好后的工序。
Circuit board glue packer is a machine which can put the processed circuit board to special glue and then pour soak dry, it is a process after the circuit board is processed.
15. 在金属圈内滴封包封胶,填充在硅压阻式压力传感器的四周,隔 绝传感器芯片与外界环境的接触。
Sealing gel is dripped into the metal ring and filled around the silicon piezoresistive pressure sensor, so as to isolate the chip of the sensor from the outside environment.
16. 在新疆和四川等探区,深井超深井压裂施工导致压裂管柱失效断裂,封隔器密封胶筒失效频率较高。
In the Sichuan and Xinjiang exploration area, fracturing in the deep or ultra deep Wells frequently results in the strings" breakage and the packer seal"s malfunction.
17. 探讨了烷氧基硅烷封端率及端羟基聚丁二烯的含量对单组分密封胶的力学性能、硬度及表干时间的影响。
The effects of different silane end-capped ratios and HTPB content on mechanical properties, hardness and surface dry time of the sealant were discussed.
18. 【摘要】线路板封胶机是对加工好的线路板浸泡特殊胶水然后淋干烘干的机器,是线路板做好后的工序。
Abstract circuit board glue packer is a machine which can put the processed circuit board to special glue and then pour soak dry, it is a process after the circuit board is processed.
19. 重点讨论了加成型硅橡胶的组成对性能的影响,综述了加成型硅橡胶灌封胶在电子工业中的应用研究进展。
The effect of the composition on the property of addition-type silicone rubbers is especially described. The recent research progress in the silicone rubber encapsulated electronic parts is reviewed.
20. 硅橡胶型灌封胶主要由基础聚合物、交联剂、催化剂、填料等组成,灌封胶的性能与胶料的组成、结构有关。
Silicone encapsulants consist of rubber compound, cross-linking agent, catalyst and filler, their performance is related to materials and compositional structure.
21. 一只盒子顶端用胶条粘着一个厚信封,另一个盒子上有一封公文信,收信人是她,寄信人是一家法律事务所。
Taped to the top of one was a small padded envelope. to another was taped a business envelope addressed to her and carrying the law firm"s return address.
22. 电子工业用加成型液体硅橡胶灌封料的关键技术指标为:胶料黏度、硫化胶力学性能和电性能。
The key properties of additional liquid silicone potting material in electronic industry are viscosity, mechanical property and dielectric property.
23. 研制了液压坐封gy241型锚定器和“自封与压缩胶筒”双重密封的ZY331型反洗封隔器。
A hydraulic setting anchor of type GY241, and a double packing ZY331 back washing packer features in self pack and rubber sleeve pack are developed.
24. 对新的单体电池制作方法,单体电池底部的胶封和电池组的密封以及12v电池的短路电流问题进行详细地介绍和讨论。
The method of flat cell making, the glue sealing for the bottom and the sealing of the battery as well as the problems of the short current of 12v battery were mainly discussed.
25. 研究了轴向坐封载荷与胶筒的峰值接触压力和轴向压缩量之间的变化规律。
The laws between axial set-down loads and maximum contact sealing pressure, and axial compressed displacement were studied.
26. 针对普通胶筒密封遵循接触式密封理论所存在的问题,提出了封隔器胶筒“完全防突”的设计理论。
In order to solve the problem concerning the contact-sealing theory for the common packing element, the design theory of "complete anti-extrusion" is put forward.
27. 印刷纸封壳:硬皮儿童书籍常用的修饰方法。书壳的包面材料是经过印刷和裱胶的纸。
Printed paper case (PPC) : a common finish for hardback children"s books, where the covering material over the boards is paper which has been printed and laminated.
28. 印刷纸封壳:硬皮儿童书籍常用的修饰方法。书壳的包面材料是经过印刷和裱胶的纸。
Printed paper case (PPC) : a common finish for hardback children"s books, where the covering material over the boards is paper which has been printed and laminated.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
