
词语导航
基本信息
词语:薄壁管
繁体:薄壁管
拼音:báo bì guǎn
英语翻译
【化】 thin walled tube; thin-walled tube
分词翻译
壁的英语翻译:
wall【医】 paries; parietes; wall
管的英语翻译:
canal; duct; fistula; guarantee; meatus; pipe; tube; wind instrument【化】 pipe; tube
【医】 canal; canales; canalis; channel; duct; ductus; salpingo-; salpinx
syringo-; tuba; tube; tubi; tubing; tubo-; tubus; vas; vaso-; vessel
翻译例句
1. 试验结果表明:现浇薄壁管桩成桩质量好,承载性能好。
It was shown that the piles were of good quality and high bearing capacity.
2. 挂杆为一细长、薄壁管,可折叠衣撑由相对的两个折叠臂组成。
The hanging bar is a long and thin light-wall conduit. The folding clothes hanger is composed of two relative folding arms.
3. 继而从新的思路,以扩径作为薄壁管的变形方式进行抗撞性研究。
With new research ideas, thin-walled tube occur plastic deformation by expanding to achieve the purpose of energy absorption.
4. 圆形断面材料,尤其是薄壁管,在矫直过程中经常出现压扁和压纹现象。
Flattening and crack phenomenon happens constantly during the process of straightening , especially on thin tube.
5. 所述硬质薄壁管和堵头可用有机材料、无机材料、有机和无机复合材料制造。
The hard thin wall barrel and blanking adapter can be made by organic material, inorganic material, compound material of both organic and inorganic.
6. 我们专业生产和销售冷轧精密带钢,光亮带钢和黑带钢,烤蓝丝带,和薄壁管。
We specialize in manufacturing and selling cold-rolled precision strip steel, bright strip steel and black strip steel, grilled blue ribbon, and thin-walled tube.www.wEnTiyi.cOm
7. 采用塑性变形理论研究了薄壁管液压胀形过程中轴向载荷与内压力的变化情况。
Based on the theory of plasticity, the variety rule of internal pressure and axial force in the process of thin tube bulge forming is studied.
8. 本文介绍了现浇混凝土薄壁管桩技术及其在上海北环高速公路软基加固中应用。
Thin-wall Pipe Pile Using Cast-in-situ Concrete (named PCC) technology and the application in soil improvement of Shanghai Beihuan express way are introduced.
9. 现浇薄壁管桩低应变检测时,存在桩头三维效应以及平截面假定的适应性问题。
The three-dimensional effects of pile head and applicability of plane-section assumption are main problems in low strain dynamic tests on cast-in-situ concrete thin-wall pipe piles.
10. 通过与已有文献的比较,得出的结论同时适用于内层管为薄壁管和厚壁管的情况。
The conclusions are applicable to the case where the inner tube is thin-walled or thick-walled in comparison with available literatures.
11. 研究了薄壁管T型接头的电阻焊焊件的接触形式,焊接规范及接头的机械性能等。
The joint design, welding procedure and mechanical properties of the joint are studied for resistence welding of thin tubular T connection.
12. 采用三转角轧制法轧制厚壁管和相反的操作法轧制薄壁管可消除喇叭口与尾三角。
The end trumpet and end triangle can be eliminated if a rolling process with three angles rotating is used for thick wall pipe rolling and other processes for thin wall pipe rolling.
13. iStream车体采用可回收塑料制造的机械固定板,地盘采用轻型的复合薄壁管。
IStream cars comprise a body of mechanically fastened panels made from recycled plastic bottles, around a lightweight composite chassis of thin-walled tubes.
14. 薄壁管数控弯曲中带芯头的柔性芯模是提高薄壁管件成形极限和成形精度的关键因素。
The mandrel(including flexible balls) is the key to improving the forming limit and forming precision in thin-walled tube NC bending process.
15. 此时的最优扩径结构长度上变短,对变刚度结构前部扩径薄壁管截短的影响进行分析。
At this time, the optimal expanding structure get shorter, so the influence of the truncated thin-walled tube is analysed.
16. 管材与不同部位模具间隙是影响薄壁管数控弯曲过程成形极限和成形质量的重要因素。
Clearance between tube and various dies is of great importance to influence forming limit and quality during thin-walled nc bending process.
17. 对于缩口系数小、变形前后壁厚比较大的薄壁管件的缩口成形,一般需多道工序来完成。
The shrink shape for thin tube with little shrink rate and bigger thickness difference in the distortion generally demands more working procedures.
18. 在薄壁管体的缩径旋压成形过程中,旋压工艺方法和旋轮的选择对缩旋成形有着重要作用。
During the reduction spinning process of thin thickness tube, the selection of spinning technique is important for spinning figuration.
19. 分析了不同D/S值的厚、中、薄壁管在A SSEL轧管机上的螺旋变形特征和壁厚精度。
The characteristics of spiral deformation on ASSEL mill and wall thickness accuracy for thick, middle and thin tubes with various D/S value have been analyzed.
20. 利用扫描电镜对多轴比例和非比例加载下的薄壁管多轴疲劳试样的断口表面进行扫描观测分析。
The fatigue fracture surfaces of multiaxial fatigue specimens subjected to proportional and non-proportional multiaxial loadings were observed and analyzed by using the scan electron microscope.
21. 薄壁管无芯推压缩径成形过程比薄壁管拉拔成形过程复杂得多,迄今很少有这方面的文献报道。
The hollow- sinking of a thin - walled tube is more complicated than the drawing. So far there are few references on it.
22. 工程实践应用表明,薄壁管桩施工方便,承载力高,成桩质量可靠,具有较大的应用推广价值。
It can be concluded that the new style pile is convenient to be constructed with high bearing capacity and reliable quality. It is expected to be applied in ground improvement with great prospect.
23. 本文介绍了薄壁管专用钻头的结构特点及工作原理,其结构设计新颖,对薄壁管的钻削有实用价值。
In this paper, the structure feature and principle of this special drill has been introduced. Its special design is very useful for drilling thin-wall pipe.
24. 介绍了一种薄壁管件快速切割机的结构和工作原理,分析了相应控制系统的硬件构成及软件实现方案。
The structure and principle of a Rapid Auto-Cutter of thin tube is introduced, the relevant hardware and software of the control system are analyzed.
25. 最后利用该测试装置对69111不锈钢管件进行了挤胀实验,获得了薄壁管件的周向力学性能数据。
Finally, the testing device was applied to expand a hole of tube specimen made of 69111 stainless steel and circumferential mechanics performance data were obtained.
26. 结合实际工艺,对铝合金薄壁管缩径旋压的缺陷进行分析,列出了缺陷的种类、产生原因以及预防措施。
Based on practical process, defection in aluminum tube neck-spinning is analyzed, and defection sort, cause and prevention method are listed.
27. 新型钎杆采用螺旋副连接柱面承载结构和薄壁管式结构,具有能量传递效率高抗疲劳寿命性能好等特点。
The proposed rod adopts a structure of screw-pair jointing, load-bearing cylinder and thin-wall tube, and is characteristic of high energy transfer efficiency and good anti-fatigue life.
28. 由于加速度范围的原因,无法得到优化结果,意味着传统的薄壁管压缩结构不利于对行人下肢的保护作用。
Because of the scale of acceleration, compressing thin-walled tube is very difficult to achieve the standard of pedestrian protection.
29. 基于该模型分析了褥垫层模量、桩间距、桩长、土体模量等因素对现浇薄壁管桩复合地基承载性能的影响。
Based on the model, the effect of cushion stiffness, pile spacing, pile length and soil modulus on the bearing capacity was analyzed.
30. 小直径超薄壁管纵缝焊接的主要问题是烧穿,解决这个问题的关键是严格控制焊接接头的装配质量及焊接工艺。
Burn through is the main problem of longitudinal seam welding of ultra-thin tube with small diameter. Assembly of the joint and welding technology are the key to solve the problem.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
