螺纹孔用英语怎么说,螺纹孔的英文翻译


词语导航

基本信息

词语:螺纹孔

繁体:螺紋孔

拼音:luó wén kǒng

英语翻译

【化】 tapping hole; threaded hole

相关词条

1.threadedhole  

分词翻译

螺的英语翻译:

snail; spiral shell; whorl

纹孔的英语翻译:

【机】 reaming

翻译例句

1. 车厢有螺纹孔用于安装在邻近的建设。

The carriages have threaded holes for mounting on adjacent constructions.

2. 介绍一种在铝件上加工螺纹孔的方法。

This paper introduces a method of working thread hole on aluminum part.

3. 顶丝的一端置入扁平孔套一侧的螺纹孔内。

One end of the jack bolt is positioned in the threaded hole at one side of the flat hole sleeve.

4. 介绍了煤矿采掘设备破损螺纹孔的多种修理方法。

The paper introduces various kinds of methods on repairing damaged thead holes of mining and developing equipment in coalmines.

5. 凸耳阀门可规定采用螺纹孔螺栓连接或贯穿孔螺栓连接。

Lug valves can be specified with threaded or thru-hole bolting.

6. 在改善低强度机体螺纹孔强度方面,钢丝螺套作用非常明显。

In the threaded holes to improve low-intensity body strength, the wire thread insert effect is obvious.

7. 自攻螺丝的螺纹会在孔内切割出内螺纹孔,然后锁紧两块铁板。

These screws have threads that cut the hole and are made to fasten metal to metal.

8. 连接柱的内圆周壁上可设有与机床和电钻连接的螺纹孔或锥孔。

The interior circumferential wall of the connecting pole can be equipped with the thread hole or the taper hole connecting with a machine tool and an electric drill.

9. 将膨胀拉条中间钻出一个螺纹孔,如(图4),使之与螺丝相对应。

A threaded hole is drilled in the middle of the expansion bracing, such as (Figs 4), which corresponds with the screw.

10. 钻夹头尾部可制造成莫氏锥度、贾格锥度或公、英制螺纹孔与机床连接。

The chuck can be connected with machine tools through Morse taper , Jarno taper , …

11. 所述连接体为圆柱形且设有两个螺纹孔,所述钻杆末端安装在所述螺纹孔中。

The connecting body is cylindrical and provided with two threaded holes; the tail end of the drill pipe is arranged in the threaded holes.

12. 系列10l配置测试杆和较短的温控杆,适用于直接安装在容器的螺纹孔上。

Series 10l furnished with test lever and short thermostat for installation directly in tank tapping.

13. 同时,端部法兰和顶盖骑缝中的螺纹孔可以一次性加工完成,加工制造简单方便。

At the same time, the high-neck flange and the cap straddle the screw hole can be completed a one-time processing, manufacturing is simple and convenient.

14. 长途汽运必须保持箱体平衡,同时通过夹具把箱体运输螺纹孔与汽车牢固连接一体。

For long-distance transportation by truck, the substation must be securely fastened to the truck through the bottom holes, and good balance be maintained.

15. 背板与散热器可以通过螺钉和螺 母、螺钉与外翻螺纹、螺钉与螺纹孔相互固定连接。

The backboard connects with the radiator by the bolt and the nut, by the bolt and the everting whorl, or by the bolt and the whorl bore mutually.

16. 待职电容器保护保险丝可以轻松地装上直接上电容器衬套,因为他们是装有螺纹孔两边。

SIBA Capacitor protection fuses can easily be fitted direct onto capacitor bushings, because they are fitted with threaded holes at both ends.

17. 对引起螺纹孔延伸公差带失效原因的各种因素进行了分析,并对采取的预防措施进行了讨论。

Many factors which possibly lead to failure of extended tolerances of threaded holes are analyzed, and a discussion on the method of prevention is made.

18. 研制了一种网架螺栓节点球螺纹孔空间角度专用检测装置,介绍了该装置的结构、原理与检测方法。

The measuring device of space Angle between both bolted holes of bolted sphere node of grid"s machining is developed. The structure, principle and test method of the device are introduced.

19. 典型应用:各种重要零部件螺纹孔脱扣后修复,如:注塑机模板螺纹孔的修复。发动机缸体螺纹孔的修复等。

Typical Applications: release a variety of important parts to repair the screw holes, such as: injection molding machine template screw hole repair. Engine block threaded holes of the repair.

20. 系列100 XL配置测试杆和加长温控杆,适用于安装在热水出水管路上,或直接安装在容器的螺纹孔上。

Series 100xl furnished with test lever and extension thermostat for installation in the hot water outlet line or directly in the tank tapping.

21. 产品有以下缺陷:水冷头上的安装孔没有螺纹,用配带的自攻螺丝安装非常困难。

there has no screw thread on the installation hole on head of water-cooling. It"s difficult to install it by the screw tap which along the products.

22. 选择,测量,切割,铰孔和螺纹连接管道,安装喷头,并爬上备用管道。

Select, measure, cut, ream and thread pipe, install sprinkler heads and mount prepared pipe in supports.

23. 深孔螺纹加工效率的高低和加工质量的好坏,直接影响零件的生产效率和精度。

The deep hole thread processing efficiency height and the processing quality, directly affects the components the production efficiency and the precision.

24. 螺纹安装孔的位置与电装电机轴线成错开对称分布。

Screw hollow and motor spindle are distributed staggered and equally.

25. 在安装之前,确保管道末端已经进行铰孔,攻螺纹,并且。

Before installing, be sure pipe ends are reamed and threads are cut to size.

26. 所述螺钉的螺杆直接旋入所述固定件的螺孔内,二者的螺纹紧密结合,从而可将两板体牢固连接于一起。

The screw of bolt revolted into threaded hole directly and the screw thread of them are combined tightly, so the two boards can be connected together firmly.

27. 前言: 钢质曲轴螺孔攻丝加工中经常出现螺纹烂牙、中径扩大等问题,且刀具寿命较短。

During tapping in steel crankshafts, the most commonly encountered problems are "mess tooth" and oversize thread, additionally the tap life is very low.

28. 灯具螺丝安装孔的螺纹能够保证安全地安装和拆除。

Threads intended to receive holding installation and removal of knurled headed screws.wwW.wENtiyi.com

29. 攻丝是在一个孔中车出螺纹,以便装上有帽螺钉或螺栓。

Tapping is the process of cutting a thread inside a hole so that a cap screw or bolt may be threaded into it.

30. 攻丝是在一个孔中车出螺纹,以便装上有帽螺钉或螺栓。

Tapping is the process of cutting a thread inside a hole so that a cap screw or bolt may be threaded into it.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!