
词语导航
基本信息
词语:覆层钢
繁体:覆層鋼
拼音:fù céng gāng
英语翻译
【化】 clad steel
相关词条
1.Colclad分词翻译
层的英语翻译:
layer; region; stage; story; stratum; tier【计】 layer
【医】 coat; lamella; lamellae; lamina; laminae; layer; strata; stratum
钢的英语翻译:
steel【化】 steel
【医】 steel
翻译例句
1. 研究采用铸渗法制备三元硼化物硬质合金覆层钢基材料。
The preparation of ternary boride hard alloy cladding layer on steel substrate is studied.
2. 展馆的红色外墙釆用特殊的耐风化钢覆层材料,这种材料在澳大利亚的城市中应用非常广泛。
The color of the pavilion"s red facade is made from the use of a special kind of steel, which is commonly used in Australia cities.
3. 该工艺可使不锈钢覆层很薄,从而降低材料成本。
The process makes stainless steel cladding very thin to reduce material cost.
4. 采用液相烧结法将爆炸压实后的钢结硬质合金粉末复合在碳钢表面,成功获得覆层材料。
Steel-bonded cemented carbide powder processed by explosive compaction was successfully bonded to the surface of carbon steel through liquid phase sintering.
5. 采用微观测试分析方法,针对316L不锈钢粉末,深入研究了激光快速成形过程中熔覆层的开裂行为及其形成机理。
The forming mechanism for the crack produced in the process of laser forming 316l stainless steel powder alloy has been studied in the paper by micro measurements.
6. 热处理、碳化、淬火硬化层,表面覆层,钢,有色金属,微小及薄形零件等。Www.wEnTIYi.COM
Heat treated layer, carbonized layer, hardened hard layers, superficial coating, steels, non-ferrous metal, micro and thin shaped components.
7. 采用真空液相烧结法,在Q 235钢表面制备三元硼化物基金属陶瓷覆层材料。
A ternary boride cermet clad material was fabricated on the Q235 steel substrate by means of the vacuum liquid phase sintering technique.
8. 用料浆喷涂法在Q235钢基体上成形覆层坯体;
The green body was formed by slurry spray method on the Q235 steel substrate.
9. 利用中间过渡层的作用,在镁基金属复合材料上激光熔覆了不锈钢合金层,熔覆层与基体为冶金结合。
With the effect of spraying transitional layer, a stainless steel alloy layer was obtained on the magnesium based metal matrix composites by laser cladding.
10. 利用纯镍标识钢的原始表面,研究了钢经td处理所产生的碳化钒覆层形成过程。
The original surface of a steel specimen was identified by pure nickel so as to study the formation process of a vanadium carbide coating on the surface of the steel specimen through TD treatment.
11. 研究结果表明,在一定的工艺参数下,铁基自熔性合金粉末可以在钢的表面形成一层铺展均匀、结合牢固、具有零稀释率特点的熔覆层。
The results showed that a uniform, adherent and non dilution clad coating on low carbon steel was obtained under the proper cladding parameters.
12. 研究结果表明,在一定的工艺参数下,铁基自熔性合金粉末可以在钢的表面形成一层铺展均匀、结合牢固、具有零稀释率特点的熔覆层。
The results showed that a uniform, adherent and non dilution clad coating on low carbon steel was obtained under the proper cladding parameters.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
