
词语导航
基本信息
词语:最佳值
繁体:最佳值
拼音:zuì jiā zhí
英语翻译
【计】 optimal value; optimum value
分词翻译
最的英语翻译:
best of all; furthest; most佳的英语翻译:
beautiful; fine; good【医】 eu-
值的英语翻译:
cost; value; happen to; on duty【医】 number; titer; titre; value
翻译例句
1. 高分子质量浓度存在一个最佳值。
There is an optimum value about the concentration of a high molecular weight polymer.
2. 使轧钢系统工作在最佳值附近。
It makes the system of steel rolling working in best value nearby.
3. 它将帮助您获得最佳值为你的钱。
It will help you get the best value for your money.
4. 我们努力使工作温度接近最佳值。
We try to approximate the operating temperature to the optimal value.
5. 在研磨加工中,研磨压力存在最佳值。
There is the best value of the finishing pressure in abrasive finishing.
6. 真空室内的液面高度也存在一个最佳值。
The liquid height in vacuum vessel had been optimized for inclusions removal.
7. 此方法可以帮助您为特定的环境和工作负载设定最佳值。
This approach helps you set the optimal values for your specific environment and workload.
8. 屏蔽材料的用材量和磁化率均存在最佳值范围。
For both the shield material and the magnetic susceptibility, there are the best value ranges.
9. 可以使从管道到植物根的灌溉水和肥达到最佳值。
For optimized irrigation, water and fertilizer are conveyed directly from the pipelines to the roots of the plants.
10. 数据的分析涉及找出应用程序的以下特征以确定各种最佳值。
Analysis of the data involves identifying the following application characteristics to determine various optimal values.
11. LOGBUFSZ的最佳值为128个或256个4K b页。
The optimal value for LOGBUFSZ is 128, or 256 4kb pages. For example, you can use the command below to change it.
12. 应用LOO估算选择的核函数模型能够较好地逼近最佳值。
The kernel function model selected by LOO estimation can approach the best value satisfactorily.
13. 应用loo估算选择的核函数模型能够较好地退近最佳值。
The kernel function model selected by LOO estimation can approach the best value satisfactorily.
14. 结果表明,没有一种磨削液能够使各种指标均达到最佳值。
The results shown that these fluids could not let the all index above mentioned to reach the best value.
15. 由激光合金化获得的接触电阻率可与热合金化的最佳值相比。
The specific contactresistances achieved by laser irradiation can be compared with the best results obtained by thermal alloying.
16. 初始啁啾取值不宜过大,并且存在最佳值点,一般在0.5附近。
The chirps shouldn"t be too large and they exist optimum values, which are around 0.5.
17. 提出了高炉在使用高碱度烧结矿时的碱度和烧结率组合的最佳值。
Moreover, the author also proposes an optimum apportion between basicity and percentage of sinter for the best possible.
18. 但生产上不宜超过这一最佳值太多,否则会使技术经济指标恶化。
But in production this value can not be exceeded too much, otherwise the technical and economic indexes will deteriorate.
19. 网络自动调节轧制所需的各种参数,使轧钢系统工作在最佳值附近。
It can voluntarily regulate various parameters needed by rolling steel pipe and makes the system of steel rolling working in best value nearby.
20. 尽管如此,适应能力强的公司意识到这不会一直是一种最佳值供需链。
However, adaptable firms realize that this is not always a best value solution.
21. 时效温度增加,合金的导电率提高,但对合金硬度的影响有个最佳值。
Raising the ageing temperature will increase the conductivity, and for the hardness of the alloy there is an optimum value of this temperature.
22. 再通过调节因子调节控制规则,超调最小时的调节因子的值即为最佳值。
By adjusting the adjustive factor to minimize the overshoot of output, we can get the best adjustive factor.
23. 模拟人体温度装置及人体所发出的CO2气体(通过测试取得最佳值)。
Analog devices and human body temperature of CO2 emitted gas (the test to obtain the best value).
24. 用解动力减振器最优值的方法求得了具有最大减振效果时l R外部电路的最佳值。
Optimal values of LR external circuit with maximum absorbing effect are studied with a method similar to optimum solution of dynamic vibration absorber.
25. 表面粗糙度有一个最佳值,在这个表面粗糙度下电弧能量最小、质量磨损率也最小。
There is an optimum surface roughness which will produce minimal arc energy and minimal wear rate.
26. 找出了栽植器工作稳定性的影响因素及其最佳值和对立苗率影响的因素及其最佳值。
The optimal values of the three influencing factors on the seedling-standing ratio were also found out.
27. 研究表明,光引发剂种类、稀释剂含量对固化速度都有影响且它们的含量有最佳值。
It shows that the content of photoinitiator, dilution and photosensitizer affects the curing velocity a lot.
28. 通过仿真研究,确定了遗忘因子和初始条件的最佳值,实现了对过程故障诊断和预报。
The optimum values of oblivious genes and initial conditions can be confirmed, and also the process fault diagnosis can be realized through the simulation experiments.
29. 本文利用弹性力学理论,对圆形补偿器进行应力分析,研究预加应力最佳值的计算方法。WwW.WeNtIyi.COM
By utilizing theory of elastic mechanics, this paper conducts circular compensator stress analysis. Research gives a calculation method of best pre-stress value.
30. 指出为取得较高的(火用)效率,传热单元数和水当量比应仔细选择,它们有一最佳值。
The results show that in order to obtain higher exergy efficiency number of transfer unit(NTU)and capacitance ratio should be selected carefully for they have optimum values.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
