选择腐蚀用英语怎么说，选择腐蚀的英文翻译

词语导航

基本信息

词语：选择腐蚀

繁体：選擇腐蝕

拼音：xuǎn zé fǔ shí

英语翻译

【化】 selective corrosion

分词翻译

选择的英语翻译：

select; choose; elect; pick; staple; choice; selection
【计】 ALT; selecting
【医】 selection
【经】 pick; select; selecting; selection

腐蚀的英语翻译：WWw.WEnTiyI.COM

canker; corrode; corrupt; decadent; degenerate; erode; erosion; cauterization
corrosion; corruption; degeneration
【计】 corrosion; erosing
【化】 corrosion
【医】 causis; causticize; corrode; corrosion; decay; diabrosis; erode; erosio
erosion; exesion

翻译例句

1. 他有着扎实的专业功底和对他所选择的国家的广博的了解，一场不为模糊的理想主义所腐蚀的深入学习。

He had a hard professional competence and an encyclopedic knowledge of his adopted country, an in-depth learning uncorrupted by vague idealism.

2. 嫉妒之心是带有腐蚀性的，并且能对你的幸福感和自尊造成很大伤害，所以，选择合适的比较对象是非常重要的。

Feelings of envy are corrosive and can cause great damage to your happiness and self esteem, so choosing the right comparisons is important.

3. 现金已经被这个艰难的时代腐蚀了，并且由于人们口袋中剩下的现金不多，很多意大利人无视这些严厉的规定继续认为纳税是有选择性的。

Tougher times have eroded cash balances and, with less money in their pockets, many Italians may have ignored the tighter rules and continued thinking that taxes are optional.

4. 虽然定期维修，减少腐蚀和突然黑暗的时候，你需要的情况，最好的做法是选择坚固耐用，而且效率开箱即用的产品。

Although regular maintenance will reduce corrosion and sudden darkness just when you need light, the best practice is to choose products for their durability and efficiency out of the box.

5. 金属表面的涂漆防腐蚀欲达到预期的良好效果，首先是其材料的选择，其次是具体施工工艺。

The painting anticorrosive metal surface to achieve good expected effect, the first is the choice of materials, the second is the concrete construction technology.

6. 玛法里奥·怒风：“在梦境中，我感受到了我们的大地被邪恶腐蚀，它就如同我自己的身躯一般。你选择唤醒我是正确的。”

Furion Stormrage: in the Dream, I felt our land being corrupted, just as if it were my own body. You were right to awaken me.

7. 本文包括内腐蚀控制方法，缓蚀剂选择步骤、缓蚀剂量估算计算步骤和其它有关资料。

This paper includes the control methods of internal corrosion, selection procedures of inhibitor, calculation procedures of dosage estimation and other relative information.

8. 包括规范撰写及审核、现场质量控制测试、帮助选择材料腐蚀勘察。

Including standardized writing and audit, on-site quality control testing to help choose material corrosion inspections.

9. 介绍了储罐出口管线软连管的选用及在输送腐蚀介质时如何进行合理的材料选择。

This paper introduces the type selection of compensator in the outlet pipeline of storage tank and rational selection of material as transporting corrosive media.

10. 本文利用收集气体、测定腐蚀电流和模拟电池放电等方法来选择和检验缓蚀剂。

Corrosion inhibitors were selected and tested by method of collected gas, corrosion current measurement and simulated battery discharge.

11. 阐述了凝汽器冷凝管腐蚀泄漏的原因，在防腐措施中主要讨论了选择管材的问题。

States the causes of corrosion and leakage of condensing tube in condenser. Mainly discusses the selection of tube material among the anticorrosion measures.

12. 设计师能选择更硬更耐腐蚀的钢板-有些部位能使用最高至550BHN的钢板并且仍具有较好的抗冲击性能。

Harder and more abrasive resistant steels are available to the designers - up to 550 BHN can be applied in certain regions, and still with acceptable impact properties.

13. 还可提供耐腐蚀圆柱体结构供选择。

Corrosion resistant cylinder construction is also available as an option.

14. 从耐蚀材料的选择、消防车的腐蚀防护设计及其涂装等方面探讨了消防车的防腐方式。

The corrosion protection ways of fire engine were studied in relation to the selection of corrosion resistant materials, corrosion protection design of fire engine and its painting.

15. 介绍了氯乙烯生产中设备的腐蚀状况，探讨了设备衬里的材质选择情况。

The corrosion situation of devices in the production of vinyl chloride is introduced, and the selection of lining material of the devices is discussed.

16. 文章通过对油罐内外壁的腐蚀分析，论述了选择油罐内外壁防腐涂料应考虑的因素，提出了油罐防腐施工中应注意的问题。

The paper describes the considerable factors of selecting anticorrosion coating materials for inner and outer of tank wall based on corrosion analysis.

17. 分析了甲醛生产中304不锈钢焊缝腐蚀的原因，并提出甲醛冷却器型式的选择。

The reasons that why the stainless steel welding line of 304 might be corroded in the production of formaldehyde were analyzed.

18. 在MUDSOLVNG方法中，会对所选择施工方案的腐蚀风险进行评估。

The MUDSOLV NG approach evaluates the corrosion risk in selecting a treatment.

19. 对垂直腔面发射激光器的湿法腐蚀技术、选择氧化工艺、合金工艺等关键工艺进行了研究，得到了最佳工艺条件。

We have explored technologies for the fabrication of VCSELs, such as wet etching, wet and selective oxidation and annealing.

20. 最具竞争力的转移固体薄膜技术主要有键合加选择性腐蚀工艺和注氢智能剥离工艺。

The most competitive technologies of transferring solid membrane mainly include bond and etch process and smart cut process.

21. 同时还介绍了根据腐蚀介质、温度选择底漆、胶合剂、面漆等的搭配原则。

The selection of priming paint, glue bond, block material and surface paintbased on the nature of the corrosive medium is discussed.

22. 由于腐蚀性的液体，减弱器的外壳也须仔细选择。

With corrosive fluids, the dampener case must also be selected carefully.

23. 对于缺乏透明度，塑料，选择是有限的破坏性试验，如层去除，第移除，以及应力腐蚀的考验。

For nontransparent plastics, choices are limited to destructive tests such as layer removal, section removal, and stress-corrosion tests.

24. 并针对硅微压传感元件研制中存在的问题，提出采用化学腐蚀技术，选择性腐蚀工艺控制膜厚。

In view oi the problems existing in the silicon micro pressure sensors, this paper proposes the chemical etching techniques and the selective etching processes to control diaphragm thickness.

25. 实验结果表明，同一种涂层中不同离子交换体对碳钢的腐蚀行为有不同影响，可以通过选择具有缓蚀作用的交换离子来改善涂层的防蚀性能。

The results shows that the different ion exchangers in the same ion-selective organic coating have different effect on the corrosion behavior of carbon steel.

26. 应用结果表明：选择化学清洗预防硫化亚铁自燃，效果明显，且无腐蚀、无污染，简单、快捷。

The result showed that by using chemical cleaning media to prevent autoignition of ferrous sulfide, the effect is obviously good with no corrosion, no pollution, and simple and quickly.

27. 提出以硫酸铵和氯化钾为原料，复分解制取农用硫酸钾的工艺条件及工艺流程，并探讨生产中设备选择及腐蚀问题。

The process technologies, selection of equipment and its corrosion in the production of potassium sulphate from potassium chloride and ammonium sulphate are discussed.

28. 合理地选择颜填料的种类及其含量是决定防腐蚀涂料耐腐蚀性能的关键。

The key to the performance of anticorrosive coating was the kind of fillings and dosage.

29. 通过实验选择热缩基材和粘附的热熔胶复合在一起制成的热缩密封套能够耐海水腐蚀。

A base material of thermal shrinkage is selected through experiments and it is then compounded with a sticky sweat size water to form a seal cartridge of seawater corrosin resistance.

30. 通过实验选择热缩基材和粘附的热熔胶复合在一起制成的热缩密封套能够耐海水腐蚀。

A base material of thermal shrinkage is selected through experiments and it is then compounded with a sticky sweat size water to form a seal cartridge of seawater corrosin resistance.