对流炉用英语怎么说，对流炉的英文翻译

词语导航

基本信息

词语：对流炉

繁体：對流爐

拼音：duì liú lú

英语翻译

【建】 convection furnace

分词翻译

对流的英语翻译：

convection
【化】 convection
【医】 convection; convection current

炉的英语翻译：

furnace; kiln; stove
【医】 furnace

翻译例句

1. 这些重力对流炉的设计，以满足实验室需要的行业，研究机构和学校。

These gravity convection ovens are designed to meet the laboratory needs of industry, research organizations and schools.

2. 可以很好地用来判断现有裂解炉对流段对改变原料和操作条件的适应性和设计各种规模和适应各种原料的裂解炉。

It can be used to check the flexibility of the convection section when the feed and operation condition changes, and it can be used to design the cracking furnace of different scale and feedstocks.

3. 把管式炉的前后端盖紧，是炉内的对流减少到最低限度。

The ends of the tubular furnace are closed to minimize convection currents inside the furnace.

4. 使用结果证明：对于单侧上烧嘴均热炉，辐射-对流组合式换热器有着明显的优越性。

The application results demonstrate that the combined radiation and convection recuperator has remarkable advantages for top one-way-fired soaking pits.

5. 英国航空公司已经为头等舱乘客安装了蒸汽加热炉，以取代通常使用的对流加热炉。

Steam ovens have been installed in first class to supplement the convection ovens airlines typically use.

6. 本文提出了用炉内模化试验结果推算对流过热器和对流再热器沿烟造宽度各片出口汽温偏差的一种方法。

A method is presented to deduce steam temperature deviation alcmg flue"s width at the outlet of each platen in convection superheaters and reheaters by making use of furnace model test results.wWw.weNTiyI.Com

7. 本文建立了在锅炉炉内烟气对流加热和辐射加热状态下的煤粉颗粒群非稳态着火模型。

This paper presents a model on heating up analysis of pulverized-coal cloud heated by the smoke convection and radiation correlated in the boilers.

8. 认为炉内火焰冲刷水冷壁及对流过热器烟温分布不均是造成爆管的主要原因。

It is found that the main cause of tubes bursting is the flame in the burner washing down watercooled wall and the uneven distributed flue-temperature over the convection superheater.

9. 工艺应用实践表明，钎焊翅片管应用于炼油厂高压加氢加热炉对流段是安全可靠的。

Application of soldered finned tube to convection section of high hydrogenation heater in refinery is proved to be safe and reliable through industrial practice.

10. 同时，最初设计时F108炉对流段无超高压蒸汽过热段（HPSSH），其产生的饱和蒸汽送到蒸汽过热炉进行过热。

Meanwhile, F108 was initially designed without HPSSH in convection section, and the saturated vapor generated was sent to vapor superheating furnace for superheating.

11. 该模型为以对流传热为主的金属冲击加热炉内的综合传热过程提供了一种理论研究途径。

It provides a theoretical way to study the multiple heat transfer in which heat is mainly transfered by convection in impinging furnace.

12. 针对辽阳石化分公司烯烃厂f 108裂解炉对流段炉管爆裂破坏进行了分析。

The burst part in convection section of a tube of F108 cracking furnace in alkene factory, Liaoyang Petrochmical Company, was analyzed.

13. 本文建立了在锅炉炉内烟气对流加热和辐射加热状态下的煤粉颗粒群非稳态着火模型。

This paper presents an model on heating up analysis of pulverized-coal cloud heated by smoke convection and radiation.

14. 对流加热是目前钢化炉常见的一种加热方式，文章介绍了玻璃对流加热的几种常见结构，并对优缺点进行比较。

Convection heating is a popular means for tempering furnace. In this article structures of some convection furnaces were described and merits and drawbacks of each furnace were also compared.

15. 介绍了制氢炉对流段炉管的化学清洗方法。

The chemical cleaning method of convection section tube for hydrogen manufacturing furnace was recommended.

16. 文章应用三菱q 02可编程控制器设计一个用于辐射-对流混合加热钢化炉的二维模糊控制器。

This article talks about the design of a two-dimensional fuzzy controller which can use in radiation-convection mixed heating toughened furnace by the application of Mitsubishi Q02 program controller.

17. 以减压渣油为燃料的常减压加热炉在长期生产运行过程中，对流室钉头炉管表面结垢严重。

In the long-term operation of atmospheric and vacuum heat furnace that use vacuum heavy oil as fuel, thesurface of nailhead furnace tube in the convection chamber was seriously deposited.

18. 研究有机浓缩废液焚烧过程中，石灰石添加剂对流化床焚烧炉结焦结渣的抑制作用。

The paper studies systematically inhibited characteristic of limestone on agglomeration during incinerating high organic-condensed wastewater in a laboratory scale fluidized bed combustor.

19. 本文针对间歇式炉使用高速燃烧器，提出了强对流体系下炉内辐射传热计算方法。

In accordance with the intermittent furnace of applying high-speed burners, this paper puts forward a calculation method of radiation heat transfer within furnace under a strong convection system.

20. 因此一段炉辐射段不作改造，仅对流段作相应改造以满足主要介质的预热要求。

Therefore, it"s not necessary to rebuild the radiation section of the first reformer, there is only need to transform the convertion to meet the pre-heating requirement of main materiel.

21. 同时还首次提出金属辐射反向热流是强对流间歇式炉内不可避免的新型传热特征。

At the same time, it has been firstly put forward that inverse heat flux of metal radiation is a unavoidable heat transfer property in the batch furnace with force...

22. 进一步强化对流换热，降低加热炉排烟温度、减少热损失、减少燃料消耗是进一步降低装置能耗的关键。

Further enhancing the convection heat transfer, decreasing the temperature of flue gas, reducing heat losses and fuel consumption is the key to further reducing the energy consumption of unit.

23. 根据实验与计算结果，还揭示了金属辐射反向热流是强对流间歇式炉内不可避免的新型传热特征。

It was revealed from the results of experiment and calculation that inverse heat flux of metal radiation is an unavoidable heat transfer char...

24. 根据实验与计算结果，还揭示了金属辐射反向热流是强对流间歇式炉内不可避免的新型传热特征。

It was revealed from the results of experiment and calculation that inverse heat flux of metal radiation is an unavoidable heat transfer char...