混炼胶用英语怎么说,混炼胶的英文翻译


词语导航

基本信息

词语:混炼胶

繁体:混煉膠

拼音:hùn liàn jiāo

英语翻译

【化】 gross rubber

分词翻译

混炼的英语翻译:

【化】 milling; mixing

胶的英语翻译:

glue; gluey; mucus; pastern; sticky
【医】 gloea; glue

翻译例句

1. 采用瞬时功率控制可减小混炼胶的门尼粘度波动。

The Mooney viscosity fluctuation of mix can be decreased by using instantaneous power control.

2. 本文的研究结果为高性能氟橡胶混炼胶的设计提供依据。

And the result will provide basis on the designing of high performance fluoroelastomer compound.

3. 从聚合物加工流变学的角度分析了混炼胶压出过程中的主要影响因素。

The chief influence factors in rubber compounds extrusion were analysed from an Angle of rheology in polymer processing.

4. 用质量自动在线检测仪进行了混炼胶塑性值和分散性的在线检测试验。

The on line test of mix plasticity and dispersion was made with an automatic quality on line tester.

5. 提出通过胶料混炼过程参数预测混炼胶塑性和分散性质量指标的方法。

A method was proposed for predicting the plasticity and dispersion of mix using the parameters obtained in mixing process.

6. 本公司是一家研制、开发、生产导电硅橡胶混炼胶及其制品的专业厂家。

This is a research and development, production mix conductive silicone rubber products, professional and manufacturers.

7. 研究了液体天然橡胶(LNR)对NR及其炭黑混炼胶加工性能的影响。

The effect of liquid natural rubber(LNR) on the processability of natural rubber(NR) and black filled NR compound was investigated.

8. 分析了在热硫化硅橡胶混炼胶撕裂强度的测试中撕裂强度出现偏差的原因;

The cause leading to deviation of tear strength in measuring tear strength of silicone rubber vulcanizate was analyzed.

9. 结果表明,LIR对NR/BR混炼胶有增塑作用,但增塑效果不如芳烃油;

The results showed that the plasticating effect of LIR on NR/BR blend was lower than that of aromatic oil;

10. 因为密炼机性能的好坏直接影响到混炼胶的质量,也关联着制品的使用性能和寿命。

This is because the performance of the internal mixer is related to the quality of mixed stock, and also to the performance and longevity of production.

11. 说明通过改变转子构型,可有效地改善混炼胶中炭黑的分散性,提高胶料的力学性能。

It was also showed that the carbon black dispersion and the mechanical properties of the compound were improved by changing the rotor configuration.

12. 研究了氯醚橡胶(eco)、NBR生胶及其混炼胶在不同温度和较宽剪切速率下的流变性能。

Rheological properties of ECO crude rubber, ECO gross rubber, NBR crude rubber and NBR gross rubber in various temperature were studied.

13. 开放式炼胶机的简称。橡胶工厂用来制备塑炼胶、混炼胶或进行热炼、出型的一种辊筒外露的炼胶机械。

Open rubber mixing machine for. Rubber factory is used for the preparation of plastic rubber, rubber or heat refining, a type of roller exposed rubber machinery.

14. 在上述混炼胶中加入适量的柔软剂和硫化剂DCBP ,制得在室温下贮存稳定的单组分硅橡胶糊状物。

An one part silicone rubber paste was made by blending of suitable softening agent and DCBP vulcanizing agent in aforementioned rubber compounds.

15. 采用Z桨捏合机,将端乙烯基硅橡胶、气相法白炭黑及羟基硅氧烷进行混炼,制备了高强度硅橡胶混炼胶。

High strength silicone rubber compounds were prepared using vinyl-terminated silicone rubber, fumed silica and hydroxy siloxane by intensive mixing method in Z blade mixer.

16. 将六苯基环三硅氮烷与甲基乙烯基硅橡胶按照不同配比共混得到混炼胶,测定老化前后混炼胶的力学性能。

The mechanical properties of gross rubber before and after aging were detected when mixed hexaphenyl cyclotrisilazane with methyl vinyl silicone rubber in different ratio.

17. 研究了影响氯丁胶粘剂拉伸强度主要因素,探讨了混炼胶、溶剂、树脂等对氯丁胶粘剂拉伸粘接强度的影响。

It is studied that the main influence factors on adhesive strength of CR adhesives, including mixed rubber, solvent, resin etc.

18. 实验结果表明,随着发泡剂用量的增加,混炼胶初始发泡时间缩短,制得的海绵材料的压缩应变和伸长率增加。

It was found that the first blowing time of the rubber compounds decreased, and the compress strain and the elongation of the sponge increased with the contents of blowing agent AK increased.

19. 结果发现:一羟基或羧基化合物能提高氟橡胶混炼胶的防焦烧性,并对压缩永久变形和拉伸强度等有一定的改善。

The results showed that the compound could improve the scorch safety the compression set and the tensile strength of fluororubber compound.

20. 结果发现:一羟基或羧基化合物能提高氟橡胶混炼胶的防焦烧性,并对压缩永久变形和拉伸强度等有一定的改善。

The results showed that the compound could improve the scorch safety, the compression set and the tensile strength of fluororubber compound.

21. 结果表明,六棱vcmt同步转子因其独特的结构特征、混炼机理,其混炼胶的性能较其他转子有着明显的提高。

The results indicated that, due to the unique structure characteristics and mixing mechanism, the performance of its mixed compound has significantly improved than other rotors.

22. 前言:研究了影响氯丁胶粘剂拉伸强度主要因素,探讨了混炼胶、溶剂、树脂等对氯丁胶粘剂拉伸粘接强度的影响。

It is studied that the main influence factors on adhesive strength of CR adhesives, including mixed rubber, solvent, resin etc.

23. 研究表明,与传统炭黑增强样品相比,碳纳米管在橡胶中的混入速度快,温升幅度小,混炼胶的硫化返原现象减轻。

The results showed that the nanotubes mixed rapidly into the rubber with little temperature increase during the mixing. The curing reversion of rubber composites was also reduced.

24. CR322经并用CM 140 B后,其混炼胶的加工性、压出表面及硫化胶的耐老化性及耐油性能不断得到改善。

Mixing by CR322 and CM140B, the workability of mixed rubber and thermal endurance performance and oil resistant performance of the surface and cured rubber are all improved.

25. 根据密炼机橡胶混炼过程的瞬时功率控制法,运用数理统计法建立的混炼胶门尼粘度数学模型,其预测精度值不稳定。

The mathematical model for the prediction of viscosity of mixing rubber was found by statistics, but its precision was unsteady.

26. 通过测试结果的分析和比较得出,对于未加硫黄和促进剂的混炼胶和硫化胶的炭黑分散度等级,其测定结果基本准确;

It was found from the analysis and comparison of the test results that the test results of carbon black dispersity grades for the mixes without sulfur and accelerator were basically correct;

27. 研究不同门尼粘度的集成橡胶(SIBR)混炼胶和硫化胶的各项性能,并与溶聚丁苯橡胶(SSBR1204)进行对比。

The effect of raw SIBR Mooney viscosity on the properties of mix and vulcanizate was investigated and compared to that of SSBR1204.

28. 从胶料的塑炼和混炼两个方面,简要分析了炼胶设备的性能与操作对炼胶质量的影响,对实际操作具有一定的参考价值。

Briefly analyzed the influence of compound quality by the property and operation of mixing equipment from compound plastication and mixing, this has a certain value for operation.

29. 结果表明,预先将聚脂短纤维和EPDM混炼制成母炼胶,然后再与PP共混进行动态硫化制备的复合材料的性能最佳。

The results showed that the blending method of premixing masterbatch of short polyester fiber and EPDM, and then blending with PP was the best method.

30. 结果表明,预先将聚脂短纤维和EPDM混炼制成母炼胶,然后再与PP共混进行动态硫化制备的复合材料的性能最佳。WWW.wENtIYI.Com

The results showed that the blending method of premixing masterbatch of short polyester fiber and EPDM, and then blending with PP was the best method.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!