
词语导航
基本信息
词语:热锻
繁体:熱鍛
拼音:rè duàn
英语翻译
【化】 hot forging
相关词条
1.hotforging 2.hotforging 3.heatingtraining分词翻译
热的英语翻译:
ardent; caloric; craze; eager; fever; heat; hot; warm【化】 heat
【医】 calor; cauma; febris; fever; fievre; heat; hyperthermia; hyperthermy
phlegmasia; phlegmonosis; pyreto-; pyro-; therm-; thermo-
锻的英语翻译:
forge翻译例句
1. 当提到锻造术语时,通常意味热锻。www.WentIYI.Com
When the term forging is used, it usually means hot forging.
2. 热锻、滚轧、热压等等。
Hot forging rolling extrusion etc.
3. 金属既可热锻(高于再结晶温度)也可冷锻。
The metal can be forged hot (above recrystallization temperatures) or cold.
4. 介绍了粉末冶金热锻连杆的材料成分和制造工艺。
The material chemical composition and manufacture technical process of powder metal forged connecting rods are introduced.
5. 因其成形温度的特点,对温锻模具冷却有别于热锻成形。
Because of the forming temperatures are different, the cooling of warm molding forging are distinguish from hot forging forming.
6. 牙嵌齿轮因其结构形状所致无法切削加工,需要热锻成形。
The clutch gears can not be processed by cutting, but by hot forging due to its structure and shape.
7. 铆接机、金属屑压块机、锻造操作机、大型热锻液压机等产品。
Riveting machines, metal shavings Press, forging machine operators, large products such as hot forging hydraulic press.
8. 介绍了热锻冷锻技术的概况及其在工业生产中的若干应用实例。
This paper introduces the summaries of the hot forging-cold forging and its applications in the industrial production.
9. 研究了铸态钛基复合材料和热锻后高温钛基复合材料的力学性能。
The mechanical properties of cast-titanium matrix composites and high-temperature titanium matrix composites after hot-forging have been investigated.
10. 有各类加工检验设备180余台,其中有大吨位自动热锻生产线。
It has over 180 sets of various machining and inspecting devices.
11. 为了稳定和提高精铸热锻的使用寿命,研究了其失效形式和机理。
To improve and stabilize the service life of hot-forging die fabricated by cast die steer, the failure modes and mechanism were analyzed.
12. 已在熔炼、铸造、弯管、热锻、焊接和表面热处理等行业广泛应用。
In melting, casting, bending, forging, welding and surface heat treatment and other industries widely used.
13. 采用大变形热力耦合有限元法模拟了圆柱体锻件心部空洞的热锻闭合压下率。
The critical reduction for closing the pores in the center of cylinder forgings undergoing hot upsetting are numerically simulated by using thermomechanical coupled finite element method.
14. 研究了粉末热锻浮动油封密封环的材质、表面处理、显微组织对其耐磨性的影响。
The effects of material composition, working surface treatment and microstructure on wear resistance of powder hot-forging flow oil-seal ring were studied.
15. 我厂有300吨位冲床一台,100顿,200吨冲床各2台,产品经热锻后再精加工是我厂的特色。
Our factory has a 300-ton punch, two 100-ton, 200-ton punches respectively. It is our feature that products are forged and treated by finish machining.
16. 介绍了黄铜闸板热锻成型工艺和参数,还介绍了模具结构及工作过程,提出了在热锻过程中应注意的几个问。
The forming technology and parameters for hot forging of the brass brake shield, and the structure and the working process of the die were introduced.
17. 利用EBSD取向成像技术初步分析了含锰15%的热锻态高锰钢和含锰20%的拉伸样品中的两相组织结构及取向特点。
Two phase structures and textures of a 15%mn steel in hot forging state and a tensile-deformed 20%mn steel were analyzed by orientation mapping based on EBSD technique.
18. 对发生热脆锻裂的钢锭的加热规范进行了统计分析,发现现行的热锭加热规范有可能造成钢锭热脆。
After the statistical analysis of the heating specification on the hot-short ingot, we found that the heating specification of hot ingot would probably cause the ingot hot short.
19. 介绍了镁合金薄壁板材的温热冲压成形技术、温热液压成形技术和局部热冲锻成形技术。
Sheet warm forming process, sheet warm hydroforming process and sheet press forging process are introduced in this paper.
20. 本文介绍了提高辊锻热成形模寿命的综合技术措施。
The paper studies the comprehensive technical measures to prolong the life of the hot press roll forging die.
21. 平锻机上的凸、凹模,铜合金挤压模,镶块,高温工作下的热剪切刀。
Tools for forge machine, die insert, extrusion mould for Cu alloy, hot shearing knives.
22. 前轴是汽车中的大型重要锻件,其生产工艺可归纳为锤上模锻、热模锻压力机上模锻、成形辊锻、精辊-模锻复合工艺等几种类型。
The production process includes hammer die forging, pressure forging, roll forging forming, and precision rolling-die forging composite technology.
23. 介绍了热挤镦加热精整汽车转向机摇臂轴精锻成形工艺,对热挤镦的成形原理及变形过程进行了分析探讨。
The precision forging process for the steering sector gear shaft is discussed in the paper. The principle and the path of forming of the hot extruding and upsetting are also discussed.
24. 因此,新的锻热淬火工艺可以代替传统的锻后热处理工艺,达到节能降耗、提高生产效率的目的。
Therefore, the conventional heat treatment process after forging can be replaced by the new ausform hardening process, to save energy and improve production efficiency.
25. 提出内齿轮热精锻成形的新型模具,论述了模具结构和模具齿形设计加工方法。
A new_type die for hot fine forging internal gears was put forward. The structure principle of the die and the method for designing and machining the tooth profile of the die were discussed.
26. 工艺采用冷锻、热打、切削,GY为本厂产品的注册商标。
We use cold-forming, hot-striking and cutting to produce the products. The products registering trade mark is GY.
27. 工艺采用冷锻、热打、切削,GY为本厂产品的注册商标。
We use cold-forming, hot-striking and cutting to produce the products. The products registering trade mark is GY.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
