
词语导航
基本信息
词语:激光陶瓷
繁体:激光陶瓷
拼音:jī guāng táo cí
英语翻译
【化】 laser ceramics
分词翻译
激光的英语翻译:
laser
【化】 laser
【医】 laser
陶瓷的英语翻译:
【电】 ceramic
翻译例句
1. 激光陶瓷是目前陶瓷研究的热点。
YAG laser ceramic is the current focus in ceramic research.
2. 接着分别介绍了激光陶瓷的种类、激光离子、光谱与激光特性和激光陶瓷的制备方法。
And then, the category of laser ceramic, laser active ion, laser spectrum characteristic and the method of making laser ceramic are introduced respectively.
3. 由于钇铝石榴石激光陶瓷具有优异的激光性能,是钇铝石榴石激光晶体理想的替代材料。
Yttrium Aluminum Garnet laser ceramics is an ideal material substitute for Yttrium Aluminum Garnet laser single crystal because of its excellent properties.
4. 分别介绍了红外陶瓷、激光陶瓷、闪烁陶瓷,并对他们未来的发展趋势进行简要的综述。
Some important transparent ceramics such as infrared ceramics, laser ceramics and scintillator ceramic were introduced and the developing trends were overviewed briefly.
5. 简要评述了激光陶瓷的研究进展,作为固体激光工作物质,已显示出较目前常用的激光晶体和激光玻璃具有潜在优势。
The research development of laser ceramic is stated simply. As solid laser material, laser ceramic has showed its potential advantages in comparison with the normal laser crystal and glass used now.
6. 利用几何光学原理和轴外像差理论,设计一种应用于大功率CO_2激光陶瓷烧结实验的反射型正交双带式积分镜均束装置。
Using geometrical optics theory and off-axis aberration analysis, a set of crossed double strip integrators for high power CO_2 laser beam homogenizing has been designed.
7. 针对这个问题,该团队已经开发出一种新方法:将由陶瓷粉末制成火花塞大小的激光器压入汽缸中。
The team has been developing a new approach to the problem: lasers made of ceramic powders that are pressed into spark-plug sized cylinders.
8. 直接利用激光快速成型的原型树脂模,结合陶瓷型精密铸造技术,制得了高精度、低表面粗糙度、高使用寿命的钢模具。
The steel dies with high dimensional accuracy, low surface roughness and long service life have been quickly produced by using prototyping resin molds as patterns of ceramic investment casting.
9. 陶瓷材料的激光加工是激光技术应用的新领域。
Laser processing ceramic materials is a new application of laser technology.
10. 由于陶瓷网纹辊打样机辊激光雕刻,刻的细胞是确切的行屏幕和体积跟你一样对你的记者。
Because the ceramic anilox proofer roll is laser engraved, the engraved cells are the exact line screen and volume just like you have on your press.
11. 介绍了激光熔覆陶瓷粉的工艺过程,并对熔覆层的硬度、粗糙度和熔覆与基底之间的结合情况进行了考察。
The process of laser coating of super fine ceramic powder is discussed, and the hardness, roughness and adhesion force to the substrate of the coating are investigated.
12. 并讨论了表面改性技术如热喷涂、激光、离子注入等非平衡处理技术对陶瓷材料的改性。
And discussed ceramic materials modification by surface modification processes such as thermal spraying, Laser, ion implantation and other non-equilibrium treatments.
13. 综述了激光熔覆稀土陶瓷涂层研究现状及其最新进展。
Latest progress and research status of laser cladding ceramic coating was summarized.
14. 利用激光烧结快速成型技术可以烧结覆膜陶瓷材料,形成铸造用型腔壳体并直接应用于铸造,制作金属零件。
Polymer coated ceramic powder can be used to manufacture mold shell with selective laser sintering technology, and the mold shell is usually used to cast and produce metal part.
15. 对近年来激光熔覆陶瓷涂层技术中的有关传热和界面特性等理论问题及与之相应的工艺方面的研究进行了归纳总结。
The relative theoretical and technological problems in the research field of laser cladding ceramic layer in recent years were summarized in this paper.
16. 介绍可测量压电陶瓷压电特性的激光干涉调制测量方法。
A modulated laser interferometer used for piezoelectric characteristic measurement of the piezoelectric ceramic is discussed.
17. 激光扫描声学显微镜是一种新型的无损检测多层陶瓷电容器内部缺陷的测量技术。
The scanning laser acoustic microscope is a new type of nondestructive testing technique for detecting the internal defects of multilayer ceramic capacitors.
18. 本文从理论上分析了小型tea CO_2激光器的参数选取,制出了实用的陶瓷壳体全金属密封的小型TEA CO_2激光器。
The selection of parameters for miniature TEA CO2 lasers is analysed and a miniature whole metallic-sealed-off ceramic TEA CO2 laser is developed.
19. 采用激光微细熔覆柔性直写技术在陶瓷基板上制备厚膜电阻。
A novel technique of laser micro-cladding is used to flexibly and directly fabricate thick-film resistors on ceramic substrate.
20. 采用激光微细熔覆直写布线的方法在陶瓷基板上制备高密度厚膜导体。
Thick film conductor was prepared on ceramic substrate by laser micro-cladding.
21. 利用激光熔覆技术在廉价的低碳钢表面制备陶瓷复合涂层,可以获得高硬度、耐磨、耐蚀的复合材料。
Utilize laser cladding prepare ceramic compound in the coating in low-priced low carbon steel surface, can obtain high hardness, wear-resisting, anti-corrosion composite.
22. 研究了激光涂覆时因陶瓷颗粒与金属之间物理性能差异而在其界面处形成的残余应力特征。
This paper primarily discusses the feature of residual thermal stress on the interface between ceramic particle and matrix of laser cladding layer.
23. 激光烧结陶瓷粉末快速成型三维零件的过程包括激光烧结和二次烧结后处理两个步骤。
The processes of rapid forming solid parts by laser sintering ceramic powder include laser sintering and second sintering post treatment.www.wENtiYi.CoM
24. 用脉冲激光模拟微小圆柱陶瓷棒的脉冲内热源情形,实验研究了脉冲内热源对圆柱陶瓷端面温度场变化施加的影响。
The effect of a volumetric heat source induced by pulse laser heating in the temperature fields of a fine round ceramic bar was investigated experimentally and theoretically.
25. 利用脉冲激光溅射沉积pzt压电陶瓷薄膜。
This paper reports an investigation on PZT films by pulsed laser deposition.
26. 结论激光熔覆钙磷涂层具有较好的体外生物相容性,是一种生物陶瓷涂层。
Conclusion The ceramic coating added by laser is testified in vitro to be a kind of good biocompatible ceramic.
27. 当脉冲激光辐照PZT陶瓷片时,在适当条件下,激光在样品中所产生的冲击波形上呈现椭圆状的奇异脉冲信号。
When pulsed laser radiation irradiates a PZT ceramic slab, under certain condition there will be unusual shock wave shape like ellipse in the laser induced shock waves in the sample.
28. 提出一种采用激光微调微波陶瓷介质谐振器的方法。
A novel laser trimming method is developed for microwave ceramic dielectric resonator.
29. 提出一种采用激光微调微波陶瓷介质谐振器的方法。
A novel laser trimming method is developed for microwave ceramic dielectric resonator.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
