
词语导航
基本信息
词语:曲肘
繁体:曲肘
拼音:qū zhǒu
英语翻译
【化】 toggle
分词翻译
曲的英语翻译:
bend; bent; crooked; melody; music; song; wrong
【化】 distiller"s yeast; distillery yeast
【医】 bend; curvatura; curvature; cyrto-; flexura; flexurae; flexure; leaven
肘的英语翻译:
ancon; elbow
【医】 ancon; cubitus; elbow
翻译例句
1. 角双曲肘合模装置,大增力比和大行程比。
Double toggle mold closing system with a large force magnification ratio and a large stroke ratio.
2. 曲肘机构设计,压缩空气消耗少,压力强劲。
Crank mechanism design provides strong pressure with little loss;
3. 计算结果表明,五铰链双曲肘机构为最佳类型。
The computational result showed that the five point-double toggle clamping system is the best one.
4. 经气流注至此,入曲肘浅凹处,犹如水进沼泽。
The Qi of meridian infuses into the shallow depression of the elbow like water flowing into a marsh.
5. 双曲肘机铰,运动特性符合机器开合模具要求,高速稳定;
Moving characteristic of double toggle is in accordance with mould open and close requirement, which is high speed and stable.wwW.weNtiYi.coM
6. 我们俩共用一个小办公室,连个弯胳膊曲肘的空间都很有限。
We Shared a small office where neither of us had enough elbow room.
7. 活塞的直线运动转化为对颌骨角运动通过一个双曲肘链接机制。
The linear movement of the piston is transformed into angular movement of the jaws through a double toggle link mechanism.
8. 目的:探讨冬病夏治穴位贴敷加曲肘外旋法治疗肩周炎的疗效结果。
Objective:to discuss the curative effect of treating scapulohumeral periarthritis with the methods of curing winter diseases in summer and external rotation of forearm in reflection.
9. 利用机构学的方法对注射成型机五孔直排式双曲肘合模机构进行运动和力学特性分析。
An analysis of motional and mechanical characteristics for double toggle clamping unit with straight five points of injection molding machine is made by the structural method.
10. 由于阀门转轴通过曲肘连接水流挡板所以阀门的开度越大,絮凝剂加注量就越大。反之亦然。
As the valve rotating shaft is connected with the water flow baffle by the toggle, the opening of the valve is larger, the filling-up quantity of the flocculating agent is more.
11. 作为一个规律,初级和中级选手都会有不好的抓水技术,有沉肘,沉腕的手部姿势,很少有曲肘的。
As a rule, beginner and intermediate swimmers have very poor catches with dropped elbows, dropped wrist hand positions and very little elbow bend.
12. 使用方法:双手握杠,曲肘并作上下运动,禁止横向拉动双杠。该器材较适合于中、青年人群,限二人使用。
Use Method: With both hands grip tightly on the horizontal bar, lift the body up and down. It is just for two persons once.
13. 采用现代设计理论和方法对注塑机双曲肘五支铰合模机构进行设计研究,建立了符合工程实际应用的双曲肘五支铰合模机构理论模型,并应用复合形法原理。
By using the modern design theroy methods the double toggle clamping system of injection machine is discussed in defail mathematical models for clamp unit design in particular.
14. 曲左肘,上身向右扭转,左肩和上身左侧尽量沿左大腿内侧向下落。
Bend your left elbow and twist your torso to the right, dropping the left shoulder and the whole left side of the torso as low as possible on your inner left thigh.
15. 形像就是外形要像猴子,如耸肩、缩颈、圆背、束身、弯肘、垂腕、曲膝等。
Similar image means that the appearance must resemble monkeys, such as shrugging, shrinking necking, round back, recoil, bending elbow, vertical wrist, lower the knees, and so on.
16. 结合裂纹扩展率单一曲线模型对肘板裂纹扩展寿命进行了预报,预报结果与实验结果符合得较好,说明所采用的方法可行。
The fatigue life for bracket was predicted by way of the unique crack growth rate model incorporating the above SIF functions and the predicted results were in good agreement with the experiment data.
17. 结合裂纹扩展率单一曲线模型对肘板裂纹扩展寿命进行了预报,预报结果与实验结果符合得较好,说明所采用的方法可行。
The fatigue life for bracket was predicted by way of the unique crack growth rate model incorporating the above SIF functions and the predicted results were in good agreement with the experiment data.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
