
词语导航
基本信息
词语:轴系
繁体:軸系
拼音:zhóu xì
英语翻译
shafting【机】 shafting
相关词条
1.setofaxes 2.lineofshafting分词翻译
轴的英语翻译:
axes; axis; shaft; spindle【医】 ax-; ax.; axes; axio-; axis; core
系的英语翻译:
attach; fasten; tie; corollary; series; system; department; feel anxiousrelate to
【计】 Coset
【医】 series; system; systema
【经】 ratio control
翻译例句
1. 重要的因素是机床转轴系统的设计。
The important factor is the design of machine tool"s spiale system.
2. 轴系连接螺栓和钻孔尺寸测量。
Measuring dimension of shaft coupling bolts and reamer hole.
3. 主轴系统具有很高的刚性和精度。
Spindle system is of high rigidity and precision.
4. 轴系连接螺栓和孔尺寸测量。
Measuring dimension of coupling bolts and reamer hole.
5. 经测试诊断为轴系不平衡。
Unbalance of shaft system is diagnosed by testing.
6. 轴系镗孔后光学校中检查。
Optical aligned check for shaft system after boring.
7. 该公司系列角手爪采用了双轴系统活塞双作用。
The AG series angular gripper utilizes a double acting piston with a dual pivot system.
8. 轴系强度计算在舰艇轴系设计中起着重要作用。
Shafting intensity account is essential for the design of naval vessels" shafting.
9. 分析了齿套间隙与不平衡量对轴系振动的影响。
Effect of sleeve clearance and unbalance on shaft vibration is analysed.
10. 计算法轴系校中。
Centering of shafting by calculation method.
11. 本文指出扭振轴系的“重频”与其结构特点有关。
This paper explains that the repeated frequencies of torsional systems have relations with their structural feature.
12. 首先通过简化各种轴系元件,对主轴系进行几何建模。
First, geometrical modeling of basic shafting by simplified components in every shafting was built.
13. 船舶轴系合理校中对保证轴系长期可靠运转极为重要。
Shipping shaft system alignment is essential to ensuring the long-terms reliable operation of shaft.
14. 提出了转轴系统的振动模糊可靠度计算方法和计算公式。
The method and the formula of calculating vibration fuzzy reliability of the shaft system are presented.
15. 本文还进行了轴承刚度值对轴系耦合振动特性的影响的研究。
The effect of bearing stiffness on the performance of coupled vibration is also investigated in this paper.
16. 它将对该类型主轴系结构的研发有一定的理论意义与现实意义。
It has meaning both in theory and realistic for development of similar main shaft system.
17. 本实验采用传递矩阵校中为计算方法,详细介绍了轴系优化方法。
Transfer matrix theory is selected as the calculation way for the alignment.
18. 讨论了转子轴系统的偏心质量矩和轴承刚度对系统振动响应的影响。
The influence of eccentricity mass moment and the bearing stiffness to vibration characteristics of rotor system was discussed in detail.WwW.WENTiYi.cOM
19. 在船舶轴系试验台上对两种轴系布置方案进行了轴系横向振动实验。
This paper presents the lateral vibration experiment of two shaft system plants on a shafting test bed.
20. 就一个三质量的具有非线性弹性轴系统的自由扭转振动特性进行了探讨。
This paper deals with the free torsional vibration characteristics of non-linear elastic shaft with multi-degree of freedom.
21. 轴系回转误差运动的特征是一项复合信号,它含有周期分量和随机分量。
The characteristics of error motion of shafting is a complex signal which includes periodic component and random term.
22. 假设转子的转速与其轴系本身的频率比较接近时,设备将会出现共振现象。
If the rotor speed is close to the frequency of the rotor system, the resonance phenomenon will occur.
23. 电气同步是在交流传动中,常用带有均衡电动机的电轴系统来实现电气同步。
Electrical synchronization is used in ac drive, often with a balanced motor shaft system to achieve electrical synchronization.
24. 建立了滑动轴承油膜的有限元模型,分析了油膜对船舶轴系轴承反力的影响。
The finite element model of the oil films was established. The influence of oil films on the reactions of marine shaft system was analyzed.
25. 建立了滑动轴承油膜的有限元模型,分析了油膜对船舶轴系轴承反力的影响。
It is analyzed for the influence of oil films on the reactions of Marine shaft system by establishing the finite element model of the oil films.
26. 同时也为其他轴系平衡方法提高平衡精度和减少机组启停次数提供了可靠的方法。
A reliable way is provided for other shafting-balancing methods to improve balancing precision and decrease unit startup and shutdown.
27. 同时也为其他轴系平衡方法提高平衡精度和减少机组启停次数提供了可靠的方法。
A reliable way is provided for other shafting-balancing methods to improve balancing precision and decrease unit startup and shutdown.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
