喷熔用英语怎么说,喷熔的英文翻译


词语导航

基本信息

词语:喷熔

繁体:噴熔

拼音:pēn róng

英语翻译

【化】 spray fusing

分词翻译

喷的英语翻译:

gush; spew; spout; spray; sprinkle; spurt

熔的英语翻译:

fuse; melt; smelt

翻译例句

1. 热喷熔和热喷涂技术被广泛应用于机件的耐磨强化。

The thermal spraying and spray welding are used to strengthen the wearing surface of parts extensively.

2. 此外使过流部件实现最小的变形,则关系到整个喷熔工艺的成败。

Futhennore, whether the minimum deformation could be obtained for flow passage components is related to the success or failure of the entire spray welding process.

3. 本文深入研究了涂层材料、喷熔工艺对喷熔涂层质量控制的影响。

The effects of coating materials and spray welding processes on quality control of spray welded coating are thoroughly investigated in this paper.

4. 试验研究了不同含量的两种碳化钨粉末对镍基自熔合金喷熔层耐磨性的影响。

Effect of type and content of WC on the wear resistance of Ni base spray melt layers were studied.

5. 结果表明:喷熔层具有复杂的组织结构、较高的硬度,优良的结合强度和抗氧化性。

It has been shown that there are the complex structures, higher hardness, good connecting strength, excellent oxidation resistance on the layers.

6. 当w(WC)大于50%时,WC的加入使喷熔工艺性能变得极差,喷熔层的硬度和耐低应力磨粒磨损性能降低。

When WC content is more then 50%, spray-fusing technological property becomes worse, hardness of sprayed coating and low-stress abrasive particle wear resistance are weaken.

7. 最后指出无论从铝合金熔体处理本身的需要,还是与国外的先进除气设备相比,国内的旋转喷吹净化技术都有待开拓。

Domestic spinning rotor technology need to be exploited both in the sense of melt treatment process itself and comparing with overseas advanced degassing equipments was pointed out in the end.

8. 气门密封面激光熔覆的工艺和性能研究较多,但激光熔覆的合金组织和性能与现在气门密封面生产应用的等离子喷焊合金的对比数据较少。

Many studies were carried on the technologies and properties of laser cladding on the seal face of valve, but lack of contrast data with plasma spraying Alloy applied at present.

9. 熔喷技术以能生产超细纤维而倍受关注,引起了科研人员的极大兴趣。

Due to its ability of producing superfine fibers, the melt blowing technology attracts the researchers" much attention.

10. 研究用过氧化苯甲酸引发丙烯酸和甲基丙烯酸接枝熔喷聚丙烯非织造布的主要影响因素。

Main factors affecting the graft modification of acrylic acid and methacrylic acid onto melt - blown polypropylene nonwovens initiated by benzoyl peroxide are studied.

11. 熔喷生产最终产品质量的控制,对于过程优化具有重要的意义。

Contrul of final product quality in the melt blown system is of great significance for the process optimization.

12. 描述了熔喷纤维的形成工艺。

The formation process of meltblown fibers is described.

13. 采用计算机模拟方法对铝合金熔体旋转喷吹除气净化过程的温度场以及流场进行分析。

The temperature field and flow field of molten aluminum alloys during degassing and purification process by rotary impeller have been simulated by a computational model.

14. 研究了在耐酸不锈钢基体上采用激光熔覆和等离子喷焊两种工艺形成的涂层对耐腐蚀性的影响。

The effect of coating on anti corrosion has been studied, which is formed by laser cladding and plasma spurt welding on metal base of anti acid stainless steel.

15. 采用称重法对在添加了辅助装置的熔喷设备上制得的以低熔点共聚酰胺为原料的热熔纤网的均匀性进行了测试。

The uniformity of thin melt-blown webs which is produced of low melting point copolyamide by melt blowing line with accessory device was tested by weight method.

16. 描述了熔喷法非织造布的典型应用以及工艺的基本步骤与缺点。

Typical applications of meltblown nonwovens and basic function and weakness of meltblown process are described.

17. 熔喷非织造设备中聚合物熔体分配流道主要采用衣架型模头。

Coat-hanger die is usually used as the polymer melt distributor of the melt-blown nonwoven system.

18. 本文分析了熔喷聚丙烯非织造布作为吸油材料的性能和特点,介绍了可开发的熔喷吸油产品的各类用途。

The paper analyzes the performances and characteristics of pp meltblown nonwovens used as oil adsorbent, introduces the various applications and development use situation of meltblown oil adsorbent.

19. 提出熔喷非织造布边料变废为宝的方法,即将其用作面层为薄型纺粘法非织造布的口罩的内层材料。

The paper makes a manner that use of melt blown nonwoven fabric rim leftover, namely uses as internal material for gauze mask that surface material is spun bonder nonwoven.

20. 对熔-喷过程进行了理论分析。

The plasma melt injection process was analyzed theoretically.

21. 得到了镍基喷焊层元素熔入量对奥氏体焊缝显微组织及裂纹敏感性的影响规律。

The influencing rules of the content of alloy elements in nickel-base spraying layer on the microstructure of austenite weld and the crack sensitivity were found.

22. 制备了含稀土的铁基自熔合金并考察了这种自熔合金在氧-乙炔火焰喷焊过程中的自熔性。

Self fluxing iron base alloys containing rare earths have been prepared. The self fluxing performance of these alloys in oxygen acetylene flame spray welding has been observed in detail.

23. 本文重点研制了新型低熔点多元共聚酰胺熔喷非织造材料。

The new nonwovens materials of the low melt-point copolyamide are made and mainly studied in this paper.

24. 通过制备驻极体纤维和驻极体熔喷非织造布,并对成品进行电镜分析,并进行力学性能、透气、透湿、 过滤性等方面测试。

The electret fiber and the electret nonwoven are manufactured in this experiment, and their properties are analyzed by SEM, DSC and or so.

25. PP及PBT熔喷非织造布在血液过滤方面有广泛的应用,但其吸水性较差,从而影响了过滤效果。

PP and PBT melt —blown nonwoven have been applied widely in blood filter but the filtering efficiency is low due to their poor hydrophilicity, then the modifications of nonwoven are necessary.

26. 纺粘法纤维取向度比熔喷纤维高,纤维均匀。wwW.wEnTIyi.COM

Spunbonded fiber has more even fiber diameter and higher molecular orientation than that of melt blown fiber.

27. 采用喷焊技术在低碳钢表面获得合金熔覆层。

A new alloy overlay was prepared by spraying-welding technique on low carbon steel surface.

28. 试验研究了从风口喷吹碱性熔剂对高炉炉料软熔性能和初渣性能的影响。

The influence of basic flux injection through the tuyeres on softening-melting properties of blast furnace burden and properties of primary slag was investigated in laboratory.

29. 讨论了熔喷和纺粘工艺对聚丙烯纤维结构特性的影响。

This paper also discussed the effect of melt blown process and spunbonded process on polypropylene fibers" structural characteristics.

30. 针对当前各种喷焊、熔覆中输料所用送粉器的现状,为解决其中送粉均匀、稳定的问题,研制了一种新型磁力送粉器。

According to the present status of laser cladding powder feed unit, in order to solve the problem of powder feeding uniform, stabilization, a new powder feed unit is developed.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!