
词语导航
基本信息
词语:薄膜容器
繁体:薄膜容器
拼音:báo mó róng qì
英语翻译
【化】 membrane container
分词翻译
薄膜的英语翻译:
film; membrane; pellicle
【计】 thin membrane; thin-film
【医】 film
容器的英语翻译:
can; container; pocket; receptacle; recipient; vessel
【计】 outer casing
【化】 container
【医】 container; receptacle; receptaculum
【经】 container
翻译例句
1. 在一个压力容器中加热酒精含量为80%的龙舌兰酒从而产生钻石薄膜。
Thin films of diamond were produced by heating 80%-proof tequila blanco in a pressure vessel.
2. 这有助于计算容器的一次薄膜应力和二次弯曲应力。
This is useful in evaluating the primary membrane stress and the secondary bending stress in vessels.
3. 这类应用可能包括电容器的漏电流、二极管反向漏电、电缆或薄膜的绝缘电阻等。
Some of these applications may include leakage current of capacitors, reverse diode leakage, or insulation resistance of cables or films.
4. 的主要改进是,它使用一个树脂制容器,持续“几个月而不是周”,因为它使用的薄膜的树脂从基代替娇嫩硅氧烷分离。
The primary improvement is that it USES a resin container that lasts for "months and not weeks" because it USES a film to separate the resin from the base instead of delicate silicone.
5. 该粘合剂应用于可降解聚乙烯塑料薄膜育苗容器塑—塑与纸—塑的粘合,效果良好。
The new type adhesive was used in produsing degradable plastic film seedling container, fine was the effect of combination of paper-to-film as well as film-to-film.
6. 主要用项是化学薄膜,纤维、容器等,采取改性方法,可降低使用成本。
The main application of PEN is film, fiber and vessel. Using the modified method, the use cost can be saved.
7. 该电容器采用聚酯薄膜作介质。
This capacitor adopt polyester film as dielectric.wwW.WENTIYi.COm
8. 电容器用双向拉伸聚丙烯薄膜的打滑现象,是影响薄膜电容器制造质量的关键因素之一。
The slipping of BOPP film in winding the element for capacitor is one of the key factors affecting the manufacturing quality of capacitors.
9. 需要货品:铝电解电容器及塑料薄膜电容器的原材料。
Products wanted: Raw materials for aluminium electrolytic capacitors and plastic film capacitors.
10. 介绍日本有关超高压薄膜电容器产品标准、试验方法、材料要求、产品设计原理及工艺方法等。
This paper presents an overview of related Japanese product standard, testing method, requirement for material, design theory and technological process for very high voltage film capacitor.
11. 电子元器件质量评估协调体系。分规范。直流金属化聚碳酸酯薄膜固定电介质电容器。
Harmonized system of quality assessment for electronic components. sectional specification. fixed metallized polycarbonate film dielectric d. c. capacitors.
12. 建立了有机薄膜电容器结构设计和热计算的数学模型。
Mathematical models for the structure design and thermal computation of the metallized film capacitors are established.
13. 介绍了国外集成薄膜电阴器、电容器及无源组件的关键工艺技术的研究情况。
The key process technology of integrated thin - film resistor, capacitor and passive assembly was introduced.
14. 局部放电现象会给金属化有机薄膜电容器的金属化层、介质及喷金端面产生不良影响,影响电容器寿命。
Local discharging would damage the metallized layers, dielectrics and metal-coating terminals of the metallized film capacitors; therefore, reduce their life.
15. 通过自制的铝电解电容器模型,利用氧化铝薄膜具有的介电性能,通过电容量法可以准确快捷地计算氧化膜的厚度,并通过显微直接观察法、电解电量法、伏安法进行了验证。
It was swiftly to obtain the thickness of alumina film by using of it"s dielectric property and capacitor model, which was validated by means of EM, electric quantity and volt-ampere.
16. 在会议和展览,公司将着重突出了其最新的业界领先的多层陶瓷片式电容器(MLCC)及表面贴装和线粘合薄膜产品。
At the conference and exhibition, the company will be highlighting its latest industry-leading multilayer ceramic chip capacitors (MLCCs) and surface-mount and wire-bondable thin film products.
17. 薄膜内容器包括 设置在收回闭合装置的弹性薄膜内袋。
The inner film container is made of a flexible inner film bag having a removal seal.
18. 喷金是金属化薄膜电容器生产过程中的重要关键工艺,喷金质量的好坏直接影响着电容器的性能和寿命。
Metal spraying is a key process of the manufacture of metalized film capacitors. The quality of metal spraying would affect directly the performance and the life of capacitors.
19. 本发明提供一种容器,其是不用剥离气体屏蔽性薄膜,并且不用同时封装干燥剂或氧吸收剂等的容器,且可以用肉眼观察内容物。
A drug container with no need to peel a gas-barrier film or with no need to contain a desiccant, an oxygen absorbent or the like, in which the contents therein can be seen by the naked eyes.
20. 聚苯乙烯薄膜介质扩展箔电容器详细规范。单向端接矩形非金属壳。全面附加评定级。
Detail specification for polystyrene film dielectric capacitors, extended foil - Rectangular non-metallic case, unidirectional terminations - Full plus additional assessment level.
21. 本发明提供了一种薄膜晶体管衬底和具有这种薄膜晶体管衬底的显示装置,这种薄膜晶体管衬底能够减小电容器中的层间短路缺陷。
The present invention provides a thin film transistor substrate realizing reduced interlayer short-circuit defects in a capacitor, and a display device having the thin film transistor substrate.
22. 对电容器用聚酯薄膜的性能、制造方法、树脂和添加剂的要求以及电容器膜超薄化技术等进行了介绍 ,并对薄膜厚度与电容的关系进行了论述。
This paper introduces the properties of PET film for capacitor, manufacture methods of the film, the requirements of PET and the additives, the ultrathin film technique.
23. 极间介质为易于浸渍的表面粗化聚丙薄膜,特别提高了大容量电容器的可靠性。
The interelectrode dielectric adopts the polypropylene film with surface coarsening which is easy to impregnate so as to enhance the reliability of high-capacity capacitor.
24. 极间介质为易于浸渍的表面粗化聚丙薄膜,特别提高了大容量电容器的可靠性。
The interelectrode dielectric adopts the polypropylene film with surface coarsening which is easy to impregnate so as to enhance the reliability of high-capacity capacitor.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
