筒体用英语怎么说,筒体的英文翻译


词语导航

基本信息

词语:筒体

繁体:筒體

拼音:tǒng tǐ

英语翻译

【化】 bowl

分词翻译

筒的英语翻译:

a section of thick bamboo; canister; tube-shaped object
【医】 balloon; tubo-

体的英语翻译:

body; style; substance; system
【计】 body
【医】 body; corpora; corps; corpus; leukocytic crystals; scapus; shaft; soma
Somato-

翻译例句

1. 筒体应具有足够的刚度和强度。

The tube body should have enough of just degree and strength.

2. 气门挺杆为一圆筒体,坐落在凸轮上。

The valve lifter, a round cylinder, rides on the CAM.

3. 采用内筒体加外包,中间填充保温材料结构。

The inter barrel with outsourcing, insulation layer is filled heat preservation material structure.

4. 最后进行了筒体静强度校核和疲劳强度校核。

Finally, the static intensity and fatigue intensity of the cylinder are checked.

5. 筒体与轴两端的相连处装有四重轴端密封装置。

Two ends of the mixing axis that articulates with the mixing silo are loaded quadruple axle end seal device.

6. 求解控制方程,得到焦炭塔筒体的内力和位移。

Solving the control equation, the inner force and displacement can be got.

7. 建立了高压容器筒体与封头结构的有限元分析模型。

The finite element analysis model of cylinder and vessel head structures was established.

8. 这些结构包括框架、剪力墙、框一剪、框筒和筒体结构。

Frames, shear wall, frame shear wall, frame tube and tube structures are included.

9. 文中还对筒体、右摆叉及左摆叉的质心运动进行了分析。

The centroid motions of the silo, the right fork and the left fork were analyzed respectively.

10. 研究了稀土复合孕育剂在灰铸铁筒体活塞环中的孕育效果。

Inoculation effects of RE-containing inoculant used for cylinder castings of piston rings was studied.

11. 它主要是由快开盲板、筒体、异径管、鞍式支架等部分构成。

It mainly consists of fast - opening blind, barrel, reducer, and saddle support.

12. 立式筒体及其内部的塔内件、冷凝器和再沸器共同构成精馏塔。wWW.wENTIyi.COm

The vertical shell houses the column internals and together with the condenser and reboiler, constitute a distillation column.

13. 通过对金属筒体的弹塑性分析,推导出圆筒形壳体的耐压公式。

By elastic-plastic analyzing of metallic cylinder, a formulas of pressure resistance was derived.

14. 在苛刻的作业工况下,焦炭塔运行若干年后会出现筒体鼓胀变形。

In slashing running conditions, the bulging deformation of coke drums may appear after some years.

15. FG系列铁胎磨光机主要用于梳棉机锡林、道夫筒体的磨砺和修整。

FG Series Bare Cylinder Grinder is used for grinding and modification of Cylinder and Doffer.

16. 基于弹性理论,对超长筒体结构中环向预应力的建立与分布进行了研究。

Based on the elastic theory, the establishment of super-long tubes of ring pre-stress was studied.

17. 结合某改造工程,介绍了轧钢厂旋流沉淀池池壁筒体半逆作法施工技术。

Combining with some reconstruction engineering, construction technology of half top-down method for swirl sedimentation tank of rolling plant is introduced.

18. 提出了一种新型旋风除尘器,即去除筒体,直接应用锥体的旋风除尘器。

It"s introducing a new structural cyclone dust extractor that absciss cylinder and applies cone directly.

19. FFWD想去恢复现有的有价值的部分,形成空间的上筒体:墙壁和屋顶。

The existing valuable components that FFWD wanted to restore form the upper shell of the space: walls and roof.

20. 干燥机实现了“零水平推力”,大大减少了挡托轮的磨损,筒体运转平稳可靠。

This dryer machine realizes zero-horizontal thrust, which greatly reduces the abrasion of the riding wheel and the catch wheel and makes the rotation of the cylinder stable and reliable.

21. 图4系筒体翻转卸料过滤机的外形照片,图5系底盖翻转卸料过滤机的外形照片。

Figure 4 is the photo of cylinder reversed discharging filter, and Figure 5 is the photo of bottom cover reversed discharging filter.

22. 对聚合釜筒体裂纹产生的原因、失效破坏的方式进行分析,并提出相应的控制对策。

This article analyzes the causes of cracks on the cartridge body of polymerization kettle and the failure mode, and put forward some corresponding countermeasures.

23. 调整了筒体倒锥体的角度及环缝隙的距离,并改进了搅拌器的分散叶片的结构和制作。

The Angle of conical structure and the distance of round aperture were adjusted, the structure and production of distribution blade of blender were improved.

24. 本文就回转窑的筒体大修、托轮调整以及托伦部件的装配做简要的论述供同行们参考。

The overhaul of kiln shell, adjustment of carrying roller and assembly of roller parts are briefly stated in this paper.

25. 其原理是通过直接测定轮带和筒体的回转周期,来自动计算轮带与筒体之间的动态间隙。

While directly measuring the cycle time of the tyre and shell, the dynamic clearance be-tween the tyre and shell can be carried out by some calculations.

26. 分析吸收稳定塔筒体上接管部位开裂原因;并为防止此类接管部位开裂,提出预防措施。

The reasons of cracks in the nozzles of the using absorb stable column is analyzed and some preventive measurement are pointed out.

27. 不锈钢换热管是换热管是换热器的元件之一,置于筒体之内,用于两介质之间热量的交换。

Thee heat exchange tube of the stainless steel is one of the elements of the heat exchanger, which is arranged inside the cylinder and is used for the heat exchange between the two medium.

28. 通过对回转窑筒体实施截体更换,解决了设备老化带来的问题,而且工艺简单,工程成本低。

By replacement of rotary kiln tube body section solves the problems brought by ageing equipment, such a replacement with simple process and low engineering cost.

29. 研究结果表明:对于特定的旋风器,在适当的操作条件下,筒体压降随固气比的增加而减小。

The results show that pressure drop deceases with increased solid loading under the proper operating conditions only for the specially designated cyclones.

30. 该搅拌机主要由搅拌筒体、搅拌轴及其轴端密封装置,以及主传动机构和卸料机构等部分组成。

Tthe mixer is primarily composed of mixing silo, mixing axis and their axle end seal device, main drive gear and discharging mechanism etc.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!