
词语导航
基本信息
词语:冷却模
繁体:冷卻模
拼音:lěng què mó
英语翻译
【建】 cooling frame
分词翻译
冷却的英语翻译:
cool; cooling; refrigeration
【计】 chilling; cooling
【化】 cooling
【医】 cooling; refrigeration
模的英语翻译:
model; module; mould; pattern
【计】 M; MOD; modulo
【化】 mould
【医】 die; mol; mole
翻译例句
1. 介绍注射模冷却模拟技术的基本原理及在注射模冷却系统和工艺参数设计中的应用。
The basic principle of cooling simulation technology and its application in the injection mold cooling system and the design of the processing parameters are introduced.
2. 有时,较低的口模温度会在口模内表面上生成一个冷却的树脂层,这个树脂层慢慢地移出到口模出口,然后与本体料流分离,从而引起积料。
Sometimes lower die temperatures can create a cool layer of resin on the inner surface of the die that creeps slowly to the die exit and then separates from the bulk flow, causing buildup.
3. 利用阶梯型腔金属模和砂型模拟不同的冷却速度,研究了冷却速度对高硼钢凝固组织和性能的影响。
Simulating different solidification cooling rate with step-metal mould and sand mould, the effect of solidification cooling rate on microstructure and properties of high boron steel were studied.
4. 熔体在模腔里冷却,硬化,直至完全固化。然后将模子打开,推出工件,并重复以上工序。
Here, the melt cools and hardens until fully set-up. The mold is then opened, the piece ejected, and the sequence repeated.
5. 结合模流分析结果进行了浇注系统和冷却设计,保证产品有合理的外观品质及平整度。
The Moldflow analysis was introduced to designs of runners and cooling systems so as to ensure the appearance quality and surface level.
6. 电磁约束成型技术具有无模、电磁搅拌、强冷却等工艺特点。其凝固过程为一对流传热传质的动态过程。
Electromagnetic constrained forming technology features die-free, electromagnetic stirring and strong cooling, its solidification is a dynamic process of convective heat and mass transfer.
7. 铬砂制作的砂模可让铸件有较快的冷却速率,但也产生较多的微孔隙。
The cooling rate is faster in chromite sand mold, but also causes more porosity in castings.
8. 研究了一种利用蒸汽加热和冷却水冷却的变模温注塑工艺,制定了其工艺流程。
A variotherm injection molding technique with steam heating and coolant cooling was studied and its molding process was also designed.
9. 对于塑模冷却系统的优化问题,亦作了探讨。
The optimization of cooling system for injection dies is also studied in the article.
10. 特殊瓶胚专用治具不伤瓶胚,强制风冷,缩短模内冷却时间。
Jig for special PET, compelling cooling, shorten the cooling time in the mold.
11. 注射模冷却系统的设计不但关系到塑件质量而且也关系到注射成型生产效率。
The cooling system greatly influences both the quality of plastic production and efficiency of the injection molding.
12. 注塑模冷却系统的设计直接影响着注塑生产效率及塑件质量。
The design of cooling system for plastic injection mould has much to do with the production efficiency and product quality.
13. 利用选择性激光烧结快速制模工艺制造出设计好的具有最优随形冷却水道的注塑模具。
The injection tooling with the designed optimal conformal cooling channels was fabricated by using the selected laser sintering technique.
14. 与此同时、铸件在预定时间内未充分冷却就开模。
Meanwhile, casting at a predetermined time not fully cooling and then open mode.
15. 分析了高压涡轮冷却外壳的成形工艺,并介绍了聚氨酯胀形模的结构设计和模具工作过程以及模具调试改进。
The forming technology of skin-cooling high pressure turbine was analyzed, introduced polyurethane bulging die structure design and the working process and die debugging improvement.
16. 首饰蜡镶铸造是将宝石预先镶嵌在蜡模中,铸造后金属液冷却收缩而直接将宝石固定在镶口中的工艺。
In wax setting and casting process, gemstones are pre-set in the wax models and directly set by the poured metal liquid solidifying.
17. 应用该程序计算了包钢B114钢锭模内冷却的温度分布和凝固率随时间的变化规律。
Using the program, the relation between ingot temperature, solidfying rate and solidfying time of B114 ingot are obtained.
18. 使用制冷机冷却压蜡模具比水冷却法效率高,劳动条件好,提高了蜡模表面粗糙度。
To cool the pattern injection die by refrigerator is more efficient than by water cool, and it provides better working conditions and improves the surface degree of finish of the wax pattern.
19. 冷却循环水温度影响体模表浅部的温度。
CCWT has an effect on the temperature of superficial part of the pattern.
20. 介绍了光盘注射模冷却系统的设计方法,以及动镜面、定镜面、浇口与凸模的冷却水路等。
The design manner of cooling system of CD injection mold was mainly introduced, and the cooling water channel of moving plate, stationary plate, sprue and punch etc were detailed.
21. 介绍了一个注塑模冷却分析软件系统。
A software for cooling analysis in injection molding is introduced.
22. 以注塑制品的温度变化为对象,考虑了注塑制品出模后的冷却过程。
Based on the variation of temperature in injection molded parts, the simulation of cooling takes consideration of the cooling stage of the part after ejection.
23. 基于模流分析技术优化了模具的成型工艺参数、浇注系统及冷却系统。
Secondly help mold flow analysis techniques to optimize the process parameters of mold forming, casting systems and cooling systems.
24. 将灵敏度分析方法引入注塑模温度场CAE中,是如何实现冷却系统自动优化设计的核心,也是冷却系统设计的一个重要方向。
It is a key to introduce sensitivity analysis method into injection mould CAE for cooling system automatic and optimum design. It also becomes an important content in cooling system design.
25. 采用数值方法研究了不同冷却速率、不均匀模壁温度对塑件残余应力的影响。
Effects of different cooling rates and uneven mold temperature on the residual stress inside injection molded parts are studied with the help of numerical methods.
26. 在简单介绍注射模结构的基础上,对基于CAE的注射模浇注系统和冷却系统优化研究概况进行了论述。
After a brief introduction to the structure of injection moulds, the research situation of CAE-based optimization plan for the feed system and cooling system of injection moulds was discussed.
27. 该雪糕是将包括南瓜粉的配料混合后顺序经过均质、杀菌、冷却、凝冻、灌模、冻结而成。
The ice cream bar is made by homogenizing, sterilizing, cooling, freezing, mold filling and congealing in sequence after mixing the ingredients which include the pumpkin powder.www.wEntIYi.cOM
28. 该雪糕是将包括南瓜粉的配料混合后顺序经过均质、杀菌、冷却、凝冻、灌模、冻结而成。
The ice cream bar is made by homogenizing, sterilizing, cooling, freezing, mold filling and congealing in sequence after mixing the ingredients which include the pumpkin powder.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
