连接矩阵用英语怎么说，连接矩阵的英文翻译

词语导航

基本信息

词语：连接矩阵

繁体：連接矩陣

拼音：lián jiē jǔ zhèn

英语翻译

【计】 connection matrix; connectivity matrix; matrix of coupling

分词翻译

连接的英语翻译：

connect; join; joint; juncture; link
【计】 bussing; catenation; connection; interfacing; join; linkage; linking
【化】 connection
【医】 connection; couple; coupling; union
【经】 link

矩阵的英语翻译：

matrix
【计】 matrix
【化】 matrix
【经】 matrices; matrixWWW.weNTIYI.COM

翻译例句

1. 给出了一种提取广义开关网络中两节点间“最小”连接矩阵的方法。

This paper presented a method to get the minimum connection matrix from a generalized switching network.

2. 首先，论文对SDH数字交叉连接矩阵设计的理论基础进行了介绍。

First, the theory foundation of SDH digital cross-connect matrix is dissertated.

3. EVM为醇中烷基的键连接矩阵特征根之和，PEI为烷基的极化效应指数。

Where EVM is the sum of eigenvalue of bonding orbital-connection matrix of the alkyl group and PEI is the polarizibility of alkyl.

4. 利用遮挡矩阵更新表示顶点间拓扑关系的连接矩阵，得到不含隐藏线的投影图。

The connected matrix of topological relationships between vertices was renewed by occlusion matrix, and the projection drawing defined by connected matrix had no hidden line.

5. 交叉视觉皮层模型(ICM)在处理图像时，会因连接矩阵权值设置不当而产生错误。

When Intersecting Cortical Model (ICM) processing the images, it generates errors for improper operation of connection matrix.

6. 根据采集的样本训练出模糊神经网络的连接矩阵，然后对单个的联想记忆网络进行合成，实现故障的诊断。

The gathered samples are used to train the connected matrix of the fuzzy-neural network. And every single fuzzy-neural network is assembled to realize fault diagnosis.

7. 使用了自动生成参数矩阵及连接矩阵的技术，并采用梯形法求解微分方程，可对一般性的输入信号进行迅速、准确的仿真输出。

The paper also describes the technique of forming parameter matrix and linking matrix automatically and solving the differential equations of all kinds of signals.

8. 为了自主规划空间在轨装配任务的装配序列，结合大型空间桁架结构的固有分层特性，提出了一种基于连接矩阵的分层规划方法。

Then connection matrix algorithm is used to find out all of the possible paths, and a pseudo-node is added to realize the calculation of circuit loops.

9. 当在这种情况里有一定的人提升了，相关的与矩阵相连接的契约就成为了全球的思维方式。

As enough humans ascended in this manner, the associated signatures that allowed for a relationship to the matrixes became global thought-form.

10. 如果两个控制器的信号输入端并联输入，其输出端用矩阵方式连接后，将扩展成256路。

If two signal importations of controller carry to merge the importation, its exportation will expand after carry use the matrix method conjunction 256 roads.

11. 在使用多个矩阵开关卡时，请确认技术指标，检查开关卡的行是否可通过背板连接，或者是否必须通过外部进行连接。

When using multiple matrix CARDS check the specifications to determine if the rows can be connected through the backplane or if they must be wired externally.

12. 快速和可靠的网络服务，为创建和网络连接数据矩阵和QR条形码信息和优惠。

Fast and reliable web service for creating and web-linking Data Matrix and QR barcodes to information and promotional offers.

13. 关键路径进度，识别和控制，项目故障及后果，关键链法，设计结构矩阵连接关键链。

Critical Path Scheduling, Identification and Control, Project Crashing and its Consequences, Critical Chain Method, DSM to Critical Chain Linking.

14. 矩阵开关能将任意输入连接至任意输出。

A matrix switch can connect any input to any output.

15. 图114中的块矩阵可以将单路输入连接到任意单路输出，因此在任意时间只能有一个信号路径是活动的。

The blocking matrix of Figure 1-14 allows the connection of a single input to any single output. Therefore, only one signal path is active at any given time.

16. 介绍转轴编码器的原理，从而提出面板中按键和转轴编码器的混合矩阵连接方案。

A matrix connection of the panel using buttons and rotating shaft encoders is developed after the principle of rotating shaft encoders is introduced.

17. 采用连接单元法，考虑连接柔性的影响，推导出半刚性框架梁柱的刚度矩阵及半刚性梁的固端弯矩。

The stiffness matrix of semi-rigid steel frames and the fixed end moment are deduced, based on the connection element method incorporating the effects of joint flexibility.

18. 当网络连接权值矩阵的最小特征值大于激活函数导数的倒数时，网络并行收敛。

When the minimal eigenvalue of connection weights matrix is greater than the reciprocal of derivation of its neuron activation function, the network will be convergent in parallel update mode.

19. 本文提出了半刚性连接钢框架位移和内力计算的刚度矩阵法，另外还提出了在水平荷载和竖直荷载作用下内力的简化计算方法。

Displacement of stress-resultants computation technique of semi-rigidly connected steel frames inclucing stiffness matrix method, hand calculation method has been proposed.

20. 用矩阵分析与有限元相结合的方法，定量地分析确定压力容器螺栓法兰连接系统的刚性。

Combining matrix method with finite element method, quantitatively analyzes the rigidity of bolts-flanges connecting system of pressure vessels.

21. 为缩小采用CRT显示器的医疗仪器的体积，我们将LCD与8位微机连接，用8K字节汇编语言设计程序，使LCD的矩阵点与RAM数据相关。

LCD, in place of traditional CRT monitor, is connected with an8-bit MCPU. The program in8K-bytes assemble language can correlate LCD"s matrix dot with the data of RAM.

22. 推导出一般情形下柔性连接元的广义弹簧系数矩阵和刚体元的质量矩阵都是非对角的。

Both the general spring coefficient matrix of flexible connector and the mass matrix of discrete element are off-diagonal.

23. 通过改进原有馈电电路并调整开关矩阵与阵列天线的连接顺序，现提出了一套新型的多辐射中心仿真系统的设计方案。

This paper presents a new de- sign for RFSS of multi - radiation centers, which bases on modifying feed circuits and the join order in traditional sys- tem.

24. 最后通过连接子结构刚度矩阵建立的平衡方程求解相应的刚度参数。

The stiffness parameters could be calculated from the solution of an equilibrium equation, through the stiffness matrix of the joint substructure.

25. 在707a型开关主机中，可按这种方式连接多达6块矩阵卡。

Up to six Model 7174a matrix CARDS can be connected in this manner in a Model 707a Switching Mainframe.

26. 一旦将矩阵卡、源和测量装置组合连接在一起之后，就可能希望测量不同通路的偏移电流，从而来表征系统。

Once a given combination of matrix CARDS, sourcing, and measuring devices is put together, it may be desirable to measure the offset current for various pathways to characterize the system.

27. 根据分子结构的特点，用距离矩阵表征分子中原子的连接性。

Based on the characteristics of molecular structure, the distance matrix was used to characterize the connectivity of the atoms in the molecule.

28. 本文阐述不同连接方式的搭接施工网络计划关联矩阵的建立，以及利用关联矩阵中行列与元素间的关系计算网络计划的方法。给出应用实例。

Establish the relative matrix of lap construction network plan and the method to calculate the parameters of the plan, an example are given in this paper.

29. 然后，根据计算节点连接关系，形成总体渗流矩阵和渗流控制方程后就可实现三维任意结构面网络渗流计算。

Then, according to the relationships of calculating nodes, the total seepage matrix and functions can be obtained; and the seepage calculation can be completed.

30. 作者推导了具有转动弹性连接的杆单元刚度矩阵和荷载转移矩阵，其中考虑了横向剪切效应。通常的两端铰接、两端刚接或一端铰接、一端刚接的杆元刚度矩阵只是作者所推导的刚度阵的一些特例。

In this paper, the stiffness matrix and the loading transfer matrix of frame element with turn elastic connections is deduced, the cross shear effect has been taken into consideration simultaneously.