油管泵用英语怎么说，油管泵的英文翻译

词语导航

基本信息

词语：油管泵

繁体：油管泵

拼音：yóu guǎn bèng

英语翻译

【化】 oil-line pump

分词翻译

油管的英语翻译：

vitta
【化】 oil pipe; oil pipeline; oil tube
【经】 pipeline

泵的英语翻译：

pump
【化】 pump
【医】 pump

翻译例句

1. 试验结果表明：在供油提前角、转速和负荷相同的情况下，燃用二甲醚时油管泵端和嘴端压力的上升和下降速度、压力峰值都比燃用柴油时低；

The results show that at the same fuel delivery advance angle, engine speed and load, the line peak pressure and rate of pressure increment and decrement of DME are lower than that of diesel fuel.

2. 输油管道泵站可以其功能或目的、所用设备类型、操作方法、或泵送的油料等进行分类。Www.wEntiYI.cOm

Oil pipeline pumping stations may be classified by the function or purpose, by the type equipment used, by the method of operation, or by the material pumped.

3. 本文介绍一种利用柴油机高压泵喷油管壁上的压力波脉冲信号，来测量柴油机转速的新方法。

The paper introduces a new rotating speed measuring method for diesel engine utilizing pressure pulse signal on the tube wall of high pressure fuel injection system of diesel engine.

4. 盘式制动器又称为碟式制动器，顾名思义是取其形状而得名：它的主要零部件有制动盘、分泵、制动钳、油管等。

Disc brake, as the name suggests, the shape is like a disc and its main parts include brake disc, wheel cylinder, brake caliper and vitta etc.

5. 泵-管-嘴式喷油系统中喷油嘴与高压油管的结构参数决定燃油的喷雾质量，从而影响整个柴油机的燃烧状况。

The quality of fuel spray is decided by the structure of nozzle and high-pressure fuel pipe in the pump-tube-nozzle fuel injection system, and it influences the whole diesel combustion.

6. 当泵首次启动时，齿轮的旋转迫使空气离开壳体进入排油管。

When the pump is first started, rotation of gears forces air out the casing and into the discharge pipe.

7. 增压泵，从飞机油箱向总油管提供燃油的电动泵。

BOOST pump, an electrically operated fuel pump for fuel supply from the airplane fuel tank to the fuel manifold.

8. 在有杆泵系统中，经常采用油管锚定来改善工况，通过在管式泵的上方安装泄油器来改善油井施工作业时的工作环境。

In beam pump system, usually using tubing anchor to fix pump, and using bleeder Installed on the tubing pump to improve its working environment.

9. 提出只有选择工艺合理的泵机组运行方式和控制方式，才能实现成品油管道的安全平稳运行。

The authors point out that only after selecting rational operating mode and control mode of pump unit can the safe and steady operation of pipeline be ensured.

10. 现场应用表明，举升液体粘度、泵径是影响无油管采油系统举升能力的关键因素。

The field application indicated that the lifting liquid viscosity, pumps the diameter are key factor influencing lifting capacity of oil extraction system of non-tubing.

11. 介绍了国内输油管线泵的概况，并提供了多级中开式输油泵的水力设计公式和性能曲线。

The general situation of domestic oil line pumps is presented, the hydraulic design formulas and performance curves of the multistage impeller pumps are given.

12. 滑油管系，包括泵、分油机、滤器、加热器和管系状况满意，无泄漏。

Fuel oil and lubricating oil sy stems including pumps, purifiers, filters, heaters.

13. 当压力脉动发生在液压泵的吸油管路或液压系统的回油管路等低压管路中时，会引起气泡和气穴的产生及破灭。

When the pressure transients occur in low pressure pipelines such as the suction lines of pumps or the return lines of a hydraulic system, gas bubbles and cavitation will occur inside the fluid.

14. 为破怀原油乳状液或防腐，向出油管系统内注化学药剂的泵。

A pump that injects chemicals into a flow-line system for the purpose of treating emulsions or corrosion.

15. 以西南成品油管道泵站为例，运用动态规划的原理，解决配有调速泵的管道全线开泵方案问题。

Taking the pump station of West-South Oil Product pipeline as an example, dynamic programming theory is adopted to settle pump running problem of the whole pipeline with speed variable pumps.

16. 把更换下来的旧油管加工成复合油管应用到杆管偏磨的油井中，既延长了检泵周期，又节约了生产新油管的钢材。

Re-machining the failed tubing into complex tubing and re-usage of it, can prolong pump-checking cycle and save steel.

17. 在泵下增设一个新装置，使抽油泵上下运动时，油管产生弹性伸缩。

To add a new unit under the pump, it makes the oil tube telescopes elastically as the oil well pump moves up and down.

18. 不过，输出，可采取在泵的输出，因为它往往是由电潜泵制造商，或在表面上电后，是失去了应有的磨擦，在油管。

However, the output can be taken at the pump output, as it frequently is by electric submersible pump manufacturers, or at the surface after power is lost due to friction in the tubing.

19. 在有杆泵抽油过程中，因油管弹性伸缩，抽油泵冲程损失达10%以上。

During oil recovery by rod pump, owing to the elastic stretching and shrinking of the tubing string, the stroke loss of the subsurface pump reaches 10%.

20. 包含刹车片、制动油管、制动总泵、分泵、手刹等。

Including brake pads, brake hose, brake pump, brake etc...

21. 井口电缆穿越器是电潜泵采油井口上用于贯穿油管挂和上法兰，并连接电潜泵和井上电源的一种装置。

The wellhead cable penetrator is a kind of device for penetrating the tubing hanger and upper flange to connect the electric submersible pump and surface power at the production wellhead of ESP.

22. 与柴油机相比较，D 40最高油管压力下降，油管压力波动幅值较大，具有较高的泵端残余压力。

Additionally, compared with diesel fuel, D40 has a lower line pressure, higher pressure fluctuations and has a pump side residual pressure.

23. 现场应用情况表明，该工具的应用可有效地减缓油管的偏磨，延长检泵周期。

The application indicated that this tool can retard the off center wear of tubing and extends the pump...

24. 闭式系统中，液压泵的进油管直接与执行元件的回油管相连，工作液体在系统的管路中进行封闭循环。

Closed system, the hydraulic pump directly into the pipe return pipe connected to the implementation of components, working fluid in the system for closed loop pipeline.

25. 液压阀开启有响应时间，定量泵系统启动时，瞬间压力冲击特别大，油管容易爆裂。变量泵启动时只有3mpa左右的待命压力，消除了爆管的隐患。

As there is certain response time for hydraulic valve startup, constant pump has to bear the momentary extremely high pressure impact with a high risk of oil pipe explosion.

26. 动力系统包括BucherHydraulics驱动泵连单一缆索式驱动臂，以及德国Leistritz供油管。

The powertrain includes Bucher Hydraulics propulsion pump plus one single roped propulsion ram, and oil supply pipes by Leistritz, Germany.

27. 动力系统包括BucherHydraulics驱动泵连单一缆索式驱动臂，以及德国Leistritz供油管。

The powertrain includes Bucher Hydraulics propulsion pump plus one single roped propulsion ram, and oil supply pipes by Leistritz, Germany.