平面凸轮用英语怎么说，平面凸轮的英文翻译

词语导航

基本信息

词语：平面凸轮

繁体：平面凸輪

拼音：píng miàn tū lún

英语翻译

【机】 plane cam

分词翻译

平的英语翻译：

calm; draw; equal; even; flat; peaceful; plane; smooth; suppress; tie
【医】 plano-

面凸轮的英语翻译：

【机】 face cam

翻译例句

1. 该方法适用于研究缺乏原始设计资料的凸轮机构及其它类型的平面凸轮机构。

This method is suitable particularly for the analysis of CAM mechanism in case of insufficient data of original design and also applicable to other types of plate CAM mechanism in general.

2. 文中以滚子摆动从动件平面凸轮为例，其解题方法也适用于其它类型平面凸轮机构。

The case of a plate CAM with an oscillating roller follower is taken as an example. This method is also applicable to other types of plate CAM system.

3. 论述了数控磨削平面凸轮的误差分析和曲线插值计算，并讨论了砂轮的刀位轨迹的生成。

In the paper the curve interpolating calculation AD error analysis for CNC grinding of plane CAM are discussed, and the tool - path generation is also analyzed.

4. 在进行平面凸轮廓形曲线数控编程前，必须首先选择一个数学方程来描述所处理的曲线。

Before NC programming of the contour outline of CAM, a mathematical equation must be deduced to characterize the contour outline of CAM.

5. 导出了平面凸轮齿轮型间歇机构有关结构尺寸的求解式，给出了合理的产品系列及其数据。

The expression of structural dimension for gear-planar cam indexing mechanism are derived, reasonable product series and data are given.

6. 关于平面凸轮廓线设计，现有文献中推出的凸轮廓线方程式，一般均是以凸轮转角为参数的函数。

In the design of plate cam profiles, the cam profile equation generally takes the angle of cam rotation as the independent parameter.

7. 本文还给出了第三种新的度示方法，证明了这三种度示方法的一致性，从而统一了直动从动件和摆动从动件平面凸轮机构运动转角的度示方法。

This paper also gives the third new method and proves the consistence of three methods, and unifies the method for measuring kinematic Angle of type-moving and type-flickering planar CAM mechanism.

8. 本文简要介绍了国内外平面凸轮机构CAD的研究现状，阐述了开发平面凸轮机构CAD的必要性，分析了国内平面凸轮机构CAD存在的问题和发展趋势。

Firstly the paper presented the actuality of studying planar CAM CAD, expatiated the necessity of developing planar CAM CAD and analyzed the developing current and existent problem of planar CAM CAD.

9. 这种思路和方法也适用于滚柱和滚锥体输送机构中的平面复杂凸轮曲线的设计计算。

Both idea and approach are applicable for the design computation for the plane complex CAM curves in conveying mechanism of cylinder and taper bodys.

10. 通过对平面连杆机构、凸轮机构和齿轮机构等机构自由度数的求解分析，提出了准确求解平面机构自由度数的方法。

Methods for solving number of degrees of freedom of planar mechanism are put forward by solving that of mechanism such as planar linkage mechanism, cam mechanism, gear mechanism, and so on.

11. 阐明斜平面、摆臂平行四边形、端面凸轮等部分的设计和原理。

The parts design and principle were discussed that includes the oblique plane, the swing arm parallelogram, and the end plane CAM.

12. 本文利用复数表示法，得出从动转子中心作平面一般运动情况下的凸轮廓线的设计方法。

With the help of complex number operation, the author has developed a method for designing the contour of a CAM whose follower keeps a general plane motion.

13. 介绍了复极矢量法的基本原理，并通过对曲柄滑块机构和直动滚子从动件平面回转凸轮机构的运动分析，介绍了复极矢量法在机构运动分析中的应用。

This article develops a software to simulate and analyze the movement of planar linkage with single degree of freedom by using the method of complex vector.

14. 将从动件的直线往复移动和定点往复摆动用虚拟摆动统一表示，采用单参数包络曲线理论建立直动和摆动从动件平面盘形凸轮轮廓的统一数学表达式。

In this article, the unified profile expression of the planar CAM mechanism with translation or oscillation follower is established based on the theory of envelopes for 1 parameter family of curves.

15. 根据统一的数学表达式可以开发出一套适合于各类平面盘形凸轮机构的CAD软件包。

According to the unified profile expression, the CAD system of CAM for all kinds of planar CAM mechanism can be developed.

16. 根据统一的数学表达式可以开发出一套适合于各类平面盘形凸轮机构的CAD软件包。WwW.WenTIyI.COm

According to the unified profile expression, the CAD system of CAM for all kinds of planar CAM mechanism can be developed.