词语导航
基本信息
词语：逻辑驱动器
繁体：邏輯驅動器
拼音：luó jí qū dòng qì
英语翻译
【计】 logical drivewww.WENtiyi.CoM
分词翻译
逻辑的英语翻译：
logic
【计】 logic
【经】 logic
驱动器的英语翻译：
【计】 actuator; bootstrap driver; drive
【化】 actuator; driver; driving mechanism
翻译例句
1. 将逻辑驱动器分配给存储分区。
Assign logical drives to storage partitions.
2. 配置阵列和逻辑驱动器。
Configure arrays and logical drives.
3. 没有空间建立逻辑驱动器。
No space to create logic drive.
4. 源阵列中的所有逻辑驱动器都将被转移。
All from the source array will be transferred.
5. 这就将对特定逻辑驱动器的访问权授予了主机或主机组。
This grants a host or host group access to a particular logical drive.
6. 选择默认选项，其中整个LUN都被用于此逻辑驱动器。
Choose the default option, where the whole of the LUN is used for one logical drive.
7. 扩展DOS分区中的所有逻辑驱动器被删除。
All logical drives deleted in extended DOS partition.
8. 当逻辑驱动器存在时，不能删除扩展DOS分区。
Cannot delete extended DOS partition while logical drive exist.
9. 全部扩展DOS分区上的可用空间都被指定给逻辑驱动器。
All available space in Extended DOS partition is assigned to logical drives.
10. 在ArraySuccess窗口，单击ok，在此阵列上创建逻辑驱动器。
Click OK on the array Success window to create a logical drive on this array.
11. 交换分区位于第一个IDE硬盘驱动器的第六个分区，也就是扩展分区的第二个逻辑驱动器。
Swap space is located in the first IDE hard drive in the sixth partition, the second logical drive in an extended partition.
12. 源阵列和目标阵列必须都处于正常状态。源阵列中的所有现有逻辑驱动器必须处于正常状态。
Both the source and the destination must be in OK state. All the existing in the source arrays must be in OK state.
13. 这种配置可以为Linux提供更多的逻辑驱动器，从而可以将I/O 分散到相同的DS8000系统上。
This configuration provided us with more logical drives for Linux so that we could spread the I/O out to the same DS8000 systems.
14. 在上面列出的fstab文件中，root文件系统位于第一个IDE硬盘驱动器的第五个分区中，这个分区是扩展分区的第一个逻辑驱动器。
In the fstab file listed above, the root file system is on the first IDE hard drive in the fifth partition, the first logical drive in an extended partition.
15. 对于第一个guestOS，我希望它有3个逻辑驱动器，这3个逻辑驱动器直接映射到DS4800上的3个LUN(当然是通过Dom0)。
For the first guest OS, I want it to have three logical drives mapped directly to three LUNs on the DS4800 through Dom0, of course.
16. 在配置好逻辑驱动器之后，LUN配置窗口就会关闭，并将配置保存到PortConfiguration窗口中的主机系统(默认密码是config)。
When the logical drives are configured, the LUN configuration window closes, saving the configuration to the host system in the Port configuration window (which has a default password of config).
17. 因此，每个逻辑节点都会获得两个阵列或28个驱动器。
Therefore, each Logical Node is allocated with two arrays or 28 drives.
18. 驱动程序层显示花费在执行数据库驱动器处理逻辑上的时间。
The driver layer shows times spent performing database driver processing logic.
19. 存储器则是由10个硬盘驱动器(每个硬盘容量为698GB； 7,200转数)组成，由一个硬盘控制器组织成一个逻辑卷(RAID5)。
The storage consisted of 10 hard drives (698 GB each; 7,200 RPM), organized as a single logical volume (RAID 5) using a hardware controller.
20. 如果服务使用程序或服务提供程序更新任何资源(例如，使用JDBC)，请确保配置了符合XA的JDBC驱动器，并在应用程序逻辑中使用了XADataSource。
If your service consumer or service provider update any resources (for example, using JDBC), ensure that an XA-compliant JDBC driver is configured and XADataSource is used in the application logic.
21. 把复杂的逻辑和物理拓扑显示为单一目录树(驱动器映射)，其中的子目录实际上可能位于远程服务器。
This complexity of logical and physical topology appears as a single directory tree (drive mapping), with sub-directories that may actually be located on remote servers.
22. IDE驱动器上有三种类型的分区：主、逻辑和扩展。
There are three types of partition on IDE drives: primary, logical, and extended.
23. 在一个逻辑节点里，每个表空间的定义都跨越了两个阵列，使用了每个阵列中的13个驱动器，总共使用了26个硬盘驱动器。
Within a Logical Node, each tablespace is defined across two arrays, using 13 drives from each array, for a total of 26 hard drives.
24. LVM的目的是加入几个卷(可以是驱动器混合)成一个卷组，然后您创建的新逻辑卷的组。
The purpose of LVM is joining several volumes (can be drives or RAIDs or a mix) into a "volume group". Then, you create new "Logical volumes" from the group.
25. 该方法融合现有的计算机硬盘设计方法，不改变硬盘的原有工作模式，只是增加一片逻辑芯片和三个74HC16245驱动器，便可实现16个硬盘的存储方式。
With this method, a new storage system with 16 hard disk is realized by keeping the present computer hard disk design, adding a CPLD chip and three 74HC16245 gate drivers.
26. 通过该装置和方法，设备驱动器负责管理在逻辑分区和端点中的应用之间的传送请求的队列。
With the apparatus and method, the device driver is responsible for managing queues for communicating requests between applications in a logical partition and the endpoint.
27. 警告！逻辑DOS驱动器里的所有数据将全部丢失。
WARNING! Data in a deleted Logical DOS Drive will be lost.
28. 警告！逻辑DOS驱动器里的所有数据将全部丢失。
WARNING! Data in a deleted Logical DOS Drive will be lost.
版权声明：问题易所有作品（图文、音视频）均来源网络，版权归原创作者所有，与本站立场无关，如不慎侵犯了你的权益，请联系我们告知，我们将做删除处理！