
词语导航
基本信息
词语:牙槽嵴
繁体:牙槽嵴
拼音:yá cáo jǐ
英语翻译
【医】 alveolar ridge
分词翻译
牙槽的英语翻译:
【医】 alveol-; alveolar cavity; alveoli; alveolo-; alveolus; alveolus dentis
odontobothrion; odontobothrium; phatna; phatnoma; tooth sockets
嵴的英语翻译:
【医】 crest; crista; cristae; ridge
翻译例句
1. 拔牙后的牙槽嵴将普遍减少的数量和形态变化。
After tooth extraction, the alveolar ridge will commonly decrease in volume and change morphologically.
2. 结论:牙槽嵴裂对上颌骨生长发育具有一定的影响。
Conclusion the alveolar cleft plays an important role in the maxillary aberration.
3. 目的:建立兔下颌骨前牙区剩余牙槽嵴实验动物模型。
OBJECTIVE: To establish a rabbit animal model of anterior residual alveolar ridge.
4. 牙槽嵴也被称为肺泡的过程。这下有脊的上颌骨上的牙齿的房子。
The alveolar ridge is also referred to as the alveolar process. This inferiorly directed ridge of the maxilla houses the upper teeth.
5. 方法对36例牙槽嵴裂植骨术患者在术前、术后进行相应的护理。
Methods 36 cases of alveolar cleft patients were provided with correspondent nursing care preoperatively and postoperatively.
6. 摘要目的:分析即刻种植术后可能影响上颌牙槽嵴改建的因素。
Abstract : Objective: To analyze the factors which may influence the maxillary alveolar ridge alterations after immediate implantation.
7. 目的对拔牙术后抑制牙槽骨过度吸收,保持牙槽嵴高度进行研究。
Objective To study how to avoid excessive absorption alveolar bone in order to keep the height of alveolar ridge after tooth extraction.
8. 结论:颊侧骨板的厚度及缺牙位置均有可能影响术后牙槽嵴的改建。
Conclusion: the thickness of buccal bone wall and position of missing tooth, may influence the maxillary alveolar ridge alterations after immediate implantation.
9. 目的应用有限元法观察牙槽嵴高度改变与根管管壁应力变化的关系。
Objective Use FEM to observe the relationship between the change of alveolar ridges height and the stress change of wall of root canal.
10. 结论:义齿粘附剂可显著改善牙槽嵴较为低平的无牙颌患者的咀嚼功能。
Conclusion: denture adhesives can significantly improve masticatory functions for complete denture wearers whose alveolar ridges are low or flat.
11. 术后1年,牙种植手术中见再生骨质量好,缺牙区牙槽嵴宽度明显增宽。
During implant surgery at 1 year after the guided surgery, fine regenerative bone and apparently wide alveolar crest in the edentulous area were observed.
12. 结论牙槽嵴高度的改变,将引起根管壁应力的变化,两者间呈反比例关系。
Conclusion the change of alveolar ridge"s height will affect the stress change of wall of root canal, and which is in an inverse proportion.
13. 目的:了解拔牙与非拔牙矫治在治疗安氏II类错时牙槽嵴高度的变化情况。
Objective: Research the change in alveolar bone crest height among 2-phase treatment, pendulum and extraction treatment in Class II malocclusion.
14. 目的:评价在不同年龄阶段髂骨松质骨移植修复牙槽嵴裂术后植入骨的变化情况。
PURPOSE: To evaluate the changes of transplanted bones after cancellous iliac bone grafting in cleft alveolar repair in various ages.
15. 目的:总结嵌贴式植骨方法进行缺牙后重度吸收牙槽嵴骨增量的植骨技术及其效果。
PURPOSE: TO summarize the techniques and effects of onlay bone grafts on the augmentation of the severely atrophic alveolar ridges.
16. 目的观察上颌窦提升一期种植术治疗上颌后牙缺失牙槽嵴严重吸收患者的临床疗效。
Objective To study the effect of maxillary sinus floor lifting by bone graft for immediate implantation.
17. 方法:用吸光度法测定10名牙槽嵴较为低平的无牙颌患者未使用粘附剂时的咀嚼效能。
Methods: 10 edentulous patients with complete dentures whose alveolar ridges were low or flat were selected for this study.
18. 本研究介绍了牙槽嵴宽度在妨碍放置种植体时应用扩张狭窄牙槽嵴外科技术的临床效果。
This study presents the clinical results of a surgical technique that expands a narrow ridge, when its ridge width precludes the placement of dental implant.
19. 结论:山羊下颌无牙区及下颌第一前磨牙区可作为牵张成骨增高牙槽嵴新的实验动物模型。
CONCLUSION: the no tooth area and the first premolar area of mandible in sheep is a good experimental animal model for alveolar ridge augmentation by distraction osteogenesis.
20. 在冠状位截面影像上观察颧骨的形态并测量上颌牙槽嵴最颊侧点到上颌窦最外侧点的水平距离。
Measurements included the slope angle of zygomatic body on sagittal sectional image, the maximal horizontal distance from the buccal boundary of maxillary alveolar to outboard of maxillary sinus.
21. 近远中牙槽嵴高度的增加约为牵引距离的33%,唇侧牙龈宽度的增加约为牵引距离的36%。
The height of alveolar on the mesial and distal sides increased about 33% and the width of gingiva on the labial surface increased about 36% as far as the teeth were extruded.
22. 结论用钛-镍记忆合金牵张器牵张,增高犬下颌后牙区牙槽嵴,新生骨质量可以满足种植等后期修复的要求。
Conclusions the canines mandibular posterior alveolar ridge could be augmented by distraction osteogenesis using Ti-Ni SMA distractor, and the new bone is strong enough for implant placement.wWw.wenTIyi.COm
23. 方法:观察下颌第一磨牙陈旧性拔牙间隙29处。测量矫治前后该处牙槽嵴高度,将测量值进行配对t检验。
Method: 29 lower first molar Spaces were observed and the height of alveolar crest before and after treatment were analyzed with paired-t tests.
24. 目的:通过对正畸关闭陈旧性磨牙间隙前后牙槽嵴高度的对比,探讨关闭陈旧性磨牙间隙是否加重牙槽嵴吸收。
Objective: To study if closing obsolete molar space could cause severe resorption of alveolar crest through comparing the height of alveolar crest before and after closing obsolete molar space.
25. 如果舌体自然的保持在一个位置——停靠在牙槽嵴侧面或旧义齿上,那么一个正确伸展和外形的义齿,将更易于此患者去应用。
If the tongue naturally maintains a position resting against the ridge or existing denture, then a correctly extended and shaped denture will be easier for that patient to use.
26. 结果在正中颌位大力咬合时,线性总义齿修复组颞肌前束肌电值高于解剖式总义齿修复组,尤以牙槽嵴吸收严重的患者最为明显(P
Results The peak value of anterior temporal muscle of linear occlusal dentures with severe resorption of residual ridge was higher than that of anatomic occlusal dentures ( P
27. 应用骨探测法探察牙槽骨嵴顶的位置,确定其生物学宽度。
We located the alveolar bone crest by sounding and determined its biological width.
28. 结论:以牙槽孔至颧下嵴起始部的弧长和弦长为标准弯制注射针头,采用口内注射法进行上牙槽后神经阻滞麻醉,成功率为98%。
Conclusion: We use L as arch length and H as chord length to bend syringe needle that is used to posterior superior alveolar nerve block anesthesia by intraoral injection. The success rate is 98%.
29. 结论:以牙槽孔至颧下嵴起始部的弧长和弦长为标准弯制注射针头,采用口内注射法进行上牙槽后神经阻滞麻醉,成功率为98%。
Conclusion: We use L as arch length and H as chord length to bend syringe needle that is used to posterior superior alveolar nerve block anesthesia by intraoral injection. The success rate is 98%.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
