计算机控制器用英语怎么说,计算机控制器的英文翻译


词语导航

基本信息

词语:计算机控制器

繁体:計算機控制器

拼音:jì suàn jī kòng zhì qì

英语翻译

【计】 computer control unit

分词翻译

计算机的英语翻译:

adding machine; calculating machine; calculator
【计】 brain unit; computer; computing machinery; computor; FONTAC; ILLIAC IV
【经】 calculating machine

控制器的英语翻译:

control; controller
【计】 controller; CU
【化】 controller

翻译例句

1. 检查连接硬盘驱动器和计算机控制器的数据电缆(大的扁平电缆)。

Check the data cable (large flat cable) that connects hard disk drive to the computer"s controller.

2. 重点介绍了三冗余全同比计算机控制器的设计原理,给出了实验结果。

The design principle of the computerised triple redundant controller is focused and the experimental result is given.

3. 介绍了可编程计算机控制器(PCC)的特点及其在塑料挤出机上的应用。

This paper introduces the features of programmable computerized controller (PCC) and its application on the plastic extruding machines.

4. 论述了一种应用可编程计算机控制器技术的卷绕机控制系统结构及其设计方法。

A kind of computer control system with programmable computer controller was established on the basis of control technique.

5. 从分析双机冗余计算机系统的故障诊断及切换技术出发,提出三冗余全同比计算机控制器。

Through the analysis on the fault diagnostics and changeover technologies for redundant computers, the computerised triple redundant controller with fully equal comparison is presented.

6. 针对这一问题,提出了利用可编程计算机控制器(PCC)控制磁滞测功机实现串行通信加载的方法,并设计了一新型负载特性模拟实验系统。

Aimed at this problem, a method of serial communication loading on HAD which is controlled by PCC (programmable computer controller) was proposed, and a novel experimental system was designed.

7. 设计了基于CAN总线的预焙铝电解槽计算机控制系统的总体方案及基于混沌优化的电解质温度模糊控制器。

The computer control system scheme of Aluminum electrolytic cell based on CAN bus and Fuzzy controller based on chaos optimization are designed.

8. 为计算机控制提供理论指导的是采样控制理论,而采样控制器设计是采样控制理论的一个核心问题。

Sampled-data control theory offers theory guidance for computer control and design of sampled-data controller is a core problem of sampled-data control theory.

9. 该算法直接利用对象辨识给出的离散模型,导出离散的内模控制器,直接用于工业生产的计算机控制。

The algorithm makes use of discrete model given by plant identification directly, deduces discrete internal model controller, and is used in computer control of industry manufacture directly.

10. 该控制器在南京钟山化工厂半间歇式聚合釜生产过程的计算机控制系统中得到了实际应用。

This controller has been used in a computer control system for the semi-batch processing polymerization reactor at Zhong-Shan Chemical Factory of Nanjing.

11. 本自动书写仪计算机控制系统采用了GT 400SG四轴运动控制器来控制X轴、Y轴以及Z轴的运动。

The computer control system of this instrument adopts GT-400-SG four axes motion controller to control the motion of axis x, y, and Z.

12. 本文采用控制器局部网(CAN)和分散型计算机控制技术,成功地研制了CAN总线工业测控网络系统。

CAN bus industrial control network system is successfully developed by using Controller Area network (CAN) and distributed computer control technology.

13. 又因为是试验台控制系统,其本质是为了进行伺服缸的试验,所以我们针对该系统应用了多种控制策略,其中计算机控制系统的数字控制器设计是本文研究的重点内容。

Because of the essence of this control system is to complete servo cylinder test, we adopted many control strategies, and the design of digital controller of computer is the main research object.

14. 根据此方案,应用计算机控制技术和在线编程技术,设计了接收机控制器。

According to this scheme, applying the computer control technology and on board programming technology, the receiver"s controller is designed.

15. 智能型控制器带有可通信接口,通过现场总线由计算机控制,实现供电系统的遥测、遥调、遥控和遥信功能。

The intelligent controller has the communication capable interface and is controlled by computer via fieldbus, therefore it is able to have function of remote me…

16. 结合本系统是计算机控制的特点,利用模拟设计方法设计了本控制系统的数字控制器。

Our system is computer system, so we design the digital controller using analog design method.

17. 介绍以omron C2 0 0 H可编程控制器为主控机,配有上位计算机的啤酒糖化工艺计算机控制系统。

A computer control system for beer saccharification process is introduced which is equiped with a superior computer and takes an OMRON C200H as its programmable controller.

18. 它只设有两个手操控制器,操作员通过它们来操纵冗余计算机控制系统去执行所需的飞行动作。转动左手控制器可选择所需要的飞行高度,前后移动左手控制器可选择上升速度。

It has only two hand-operator uses to direct the redundant computer control twists to select the desired operating altitude and moves fore and aft to select the rate of climb.

19. 这些传感器都被连接到中央计算机控制的控制器上,并利用直接数字控制(DDC)的控制软件以及终端控制计算机进行分析。WWW.WenTiYi.Com

These sensors are connected to the central computerized controllers, and interpreted with Direct Digital control (DDC) control software and a terminal control computer.

20. 可编程控制器(PLC)将传统的继电器控制技术、计算机控制技术和通信技术融为一体,专为工业控制而设计。

Integrating the conventional relay control, computer control and communication control technologies, programmable logic control (PLC) is designed specially for industrial control.

21. 第五章以PLC为控制器,设计了倒立摆的计算机控制系统。

In chapter 5, we design the computer controlling system of the inverted pendulum using PLC.

22. 结果表明,利用液压传动系统控制机械装置的运动,并与可编程控制器和计算机控制等结合,可以很好地实现工件的翻转。

The results show that workpiece turnover is achieved well by using hydraulic transmission system controlling the motion of mechanical device and combining PLC and computer control.

23. 结果表明,利用液压传动系统控制机械装置的运动,并与可编程控制器和计算机控制等结合,可以很好地实现工件的翻转。

The results show that workpiece turnover is achieved well by using hydraulic transmission system controlling the motion of mechanical device and combining PLC and computer control.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!