
词语导航
基本信息
词语:端口结构
繁体:端口結構
拼音:duān kǒu jié gòuwWw.wenTiyi.com
英语翻译
【计】 port organization
分词翻译
端口的英语翻译:
【计】 COM port; port
结构的英语翻译:
frame; structure; composition; configuration; construction; fabric; mechanism
【计】 frame work
【医】 constitution; formatio; formation; installation; structure; tcxture
翻译例句
1. 该网络拓扑的主机采用双端口结构。
The dual-ports architecture is used in the master of the network.
2. 这项端口支持组合结构的定义,这种结构中清晰但是抽象的接口,定义了“提供的”服务,或者客户所“需要的”服务。
These ports support the definition of composite structures with clear but abstract interfaces that define the services "provided" to, or "required" by your customers.
3. 端口扫描攻击通过对主机进行系统的结构化扫描来实现。
A port scanning attack is performed through the structured and systematic scanning of a host.
4. 关键之处在于,该端口接线代码是规则的,并且可以基于在组合结构图上定义的链接来自动生成。
The key thing is that this port wiring code is regular and can be automatically generated, based on the connections defined on the composite structure diagram.
5. 域确认器可能还包含了规则去确保一些值,例如端口号,主机名以及IP地址在一个拓扑结构中是独一无二的。
The domain validator might also include rules that ensure that values such as port Numbers, host names, and IP addresses are unique within a topology.
6. 要实现这一点,您需要更新ApplicationServer的虚拟主机列表,使其包含正确的主机名称和端口号,并重新生成插件结构。
To do that, you need to update the virtual host list for Application Server to include the correct hostname and port number, and regenerate the plug-in configuration.
7. 首先,将externalorderingPort连接到结构中orderprocessing部分的对应端口。
First, we"ll connect the external ordering Port to the corresponding one on the order Processing part in the structure.
8. 这个体系结构由6个Ciscocatalyst交换机模块组成,每个模块有14个内部端口和4个外部的1gb端口。
The architecture consists of six Cisco catalyst switch modules with fourteen internal ports and four external 1gb ports each.
9. 图12显示了结构图的变化,即端口、部件与ball和socket符号。
Figure 12 shows a few of the changes with respect to Structure diagrams, namely the ports, parts and the ball and socket notation.
10. 该BK 9103还使经典的星型拓扑结构进行设置。在这种情况下,第二端口不使用。这两个端口的接口是相同的。
The BK9103 also enables a classic star topology to be set up. In this case the second port is not used. Both port interfaces are equivalent.
11. 本文首先深入研究了单端口环网结构上全交换操作的实现算法。
First of all, this dissertation extensively studied the algorithms for complete exchange on single-port torus.
12. 首先,在保持其输出与输入端口轴线平行前提下,对此结构进行了理论分析。
Firstly, keeping the axes parallel of the output and input ports, its structure is analyzed theoretically.
13. 开放式结构,通风端口,让冷却空气围绕着绕组流动。
Open construction and ventilation ports allow cooling air to circulate freely around the windings.
14. USB的电气特性反映了端口驱动电路、传输电平、编码结构、位同步处理及供电方式。
The USB electrical specifications describe the port driver circuit, electrical level of data transmission, code structure, bit synchronization and power distribution.
15. 为支持板上芯片或逻辑的测试,联合测试行动小组专门设计和定义了一种通用的芯片边界扫描结构及其测试访问端口规范,称为JTAG标准。
Joint test Action Group designed a common chip boundary-scan structure and test access port criterion which is called JTAG standard to support testing on-board chip or logic.
16. 拖到绘图页后,可以将终点端口添加到结构图中。
Drag onto the page to add an end port to your structure diagram.
17. 内部端口和极好的结构能够使这些泵处理连续的负荷检修应用和对抗高压差的泵。
The internal porting and superior construction enable these pumps to handle continuous duty service applications and pump against high differential pressure.
18. 在硬件上采用双DSP结构,对端口和电路板进行抗干扰处理;在软件上对准确设置时间和速度性能指标等方面进行了改进。
It adopts dual-DSP structure and takes anti-interference measures for ports and circuit board in hardware, and applies accurate time setting and speed performance index in software.
19. 典型的ATM输出缓冲交换结构有着理想的性能,但需要N倍端口速率的高速传送而难以实现。
The typical model of output queueing in ATM switching has ideal performance, but is difficult to realize because of the need of high speed transfer that is N times the port speed.
20. 在建立了该系统的动力学模型的基础上,讨论了以阻抗矩阵表示的二端口网络结构,稚导了相应的网络特性参数。
On the basis of establishing the dynamic model of the system, a 2-port network structure demonstrated with impedance matrix is discussed and the related network performance parameters are deduced.
21. 研究了智能分站的硬件和软件结构,详细分析了RS- 485总线通讯技术、双端口ram仲裁技术。
It studies the intelligent sub-station about its hardware and software structure, detailedly analyses RS-485 bus communication technique and bi-port RAM arbitration technique.
22. 多个交换单元以及输入输出端口模块以一定的拓扑结构和内部协议连接就构成了路由器内部的交换网。
The certain topology which interconnected by switching modules, input and output modules, and internal protocol constitutes the internal switching network in a router.
23. 采用双平衡混频结构进行设计,在射频端口实现宽带阻抗匹配,在本振端口选取合适的开关信号。
With the use of double balance mixer structure, we achieved wideband impedance match at RF port and selected appropriate switch signal at LO port.
24. 分析了开关磁阻四端口机电换能器的磁路结构,得出了内外电机避免磁耦合的原则。
The magnetic circuit structure of switch reluctance based FPEMEC was put into analysis too, and the principle of avoid inner and outer magnetic coupling was obtained.
25. 在理论上分析了该模型体系结构的不足,引入了逻辑端口的概念。
On theoretical aspect, the shortness of the model"s architecture is analyzed, the concept of the logic ports is introduced.
26. 同时,使透析液输送管与血液透析仪透析液端口间的简单而可靠 的连接成为可能,并且不需要改变透析仪的结构。
Also, it is possible to produce a simple and reliable connection of a line guiding the dialysate to a dialysate port of a blood dialysator without the need to alter the dialysator.
27. 在馈电网络中设计了一种结构非常紧凑的三端口不等功率分配器,解决了多层板之间垂直过渡的问题,为缩小馈电网络的结构尺寸提供了基础。
It also designs a compact unequal power divider and solves the problem of vertical transition of multi-layer network that can greatly reduce the volume of feed network.
28. 在馈电网络中设计了一种结构非常紧凑的三端口不等功率分配器,解决了多层板之间垂直过渡的问题,为缩小馈电网络的结构尺寸提供了基础。
It also designs a compact unequal power divider and solves the problem of vertical transition of multi-layer network that can greatly reduce the volume of feed network.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
