混炼机用英语怎么说,混炼机的英文翻译


词语导航

基本信息

词语:混炼机

繁体:混煉機

拼音:hùn liàn jī

英语翻译

【化】 mixing mill; mixing rolls

分词翻译

混的英语翻译:

get along with; goof; mix; confuse; muddle along; pass for

炼的英语翻译:

refine; smelt; temper with fire

机的英语翻译:

chance; crucial point; engine; machine; occasion; organic; pivot; plane
flexible
【医】 machineWwW.wENTIYI.Com

翻译例句

1. 文中利用有限元软件ANSYS对S形转子连续混炼机的流场进行了模拟分析。

A new model of flow in a twin rotor continuous mixer was analyzed with the finite element software ANSYS.

2. 研究了双转子连续混炼机的混炼过程和混炼原理,并建立了混合过程的数学和物理模型。

The mixing process and mechanism of two rotor continuous mixer were investigated, and the mathematical and physical models of mixing process were established.

3. 结果表明,较小的混炼机和注射机制造的试样,重量损失、烧结密度和强度的变化程度较小。

It is clarified that the specimens of smaller mixing and injection machines were smaller variation in weight loss, sintered density and strength.

4. 提出一种新型高效自蒸发循环旋转热管冷却技术来冷却连续混炼机的转子,并进行了模拟试验研究。

A new kind of high efficient self evaporating circulation rotating heat pipe cooling technique for the rotor of a continuous mixer has been proposed, and simulated test has been investigated.

5. 结果发现:混炼机产量越大,停留时间越短,分布曲线的分布越窄;而混炼机的转速对停留时间分布的影响不大。

The results showed the higher the output was, the shorter and narrower the residence time and distribution would be, while the rotor speed had little influence on RTD.

6. 长型连续混炼机(LCM)是一种既具有双螺杆挤出机连续工作的特点,又保持了密炼机优异混炼性能的新型橡塑混炼设备。

As a new type of mixer, long continuous mixer (LCM), not only maintained excellent com-pounding properties of internal mix er, but also could produce continuously.

7. 研究结果表明,采用自蒸发循环旋转热管冷却技术冷却连续混炼机的转子具有高效的导热性、良好的表面均温性、无泄漏等优点。

The rotating heat pipe cooling technique with self-evaporating circulating liquid for the rotor in continuous mixer was investigated by a simulating experiment.

8. 重点介绍了同向平行双螺杆挤出机、往复式销钉螺杆挤出机和串联式磨盘螺杆挤出机的结构特点、设计原理、混炼机理和应用领域。

Especially the structural characteristics and application fields of co-rotating twin-screw extruder, reciprocating pin-screw extruder and series disc-screw extruder developed recently are introduced.

9. 实现了在较小的螺杆长径比的条件下达到双螺杆挤出机在较大的长径比条件下,才能达到的混炼混合作用。

The machines under lesser screw length-diameter ratio possess the blending capacity of double screw extrusion under bigger length-diameter ratio.

10. 三螺杆动态混炼挤出机将振动力场引入到物料的塑化混炼挤出过程,达到强化混炼和分散的目的。

Vibration force field was introduced into processing of plastics in tri-screw dynamic mixing extruders, so as to intensifying mixability and dispersion.

11. 开放式炼胶机的简称。橡胶工厂用来制备塑炼胶、混炼胶或进行热炼、出型的一种辊筒外露的炼胶机械。

Open rubber mixing machine for. Rubber factory is used for the preparation of plastic rubber, rubber or heat refining, a type of roller exposed rubber machinery.

12. 研究挤出机螺杆直槽式屏障混炼元件的优化设计问题。

The optimal design of Moddock barrier mixing element on extruder screw was investigated.

13. 采用Z桨捏合机,将端乙烯基硅橡胶、气相法白炭黑及羟基硅氧烷进行混炼,制备了高强度硅橡胶混炼胶。

High strength silicone rubber compounds were prepared using vinyl-terminated silicone rubber, fumed silica and hydroxy siloxane by intensive mixing method in Z blade mixer.

14. 介绍我国自行研制的往复式单螺杆混炼挤出机的结构、工作原理、特点及应用等。

The structure, operational principle, characteristic and application of the reciprocating single-screw intermixing extruder developed in China itself are introduced.

15. 调距式密炼机是一种新型混炼设备,它具有密炼机和开炼机的优点。

Varied Rotor Clearance mixer was a new type mixing equipment, which had both internal mixer"s and mill"s advantages.

16. 挤出机:采用品牌调速系统,屏障型两极混炼pp - R专用螺杆,开槽机筒。

Extruder: it has adopted the famous brand speed-regulating systems, shielding double-pole mixed PP-R specialized screw and the cylinder which has channels in it.

17. 介绍了以8031单片机为主体研制的开炼机混炼工艺指导控制仪。

This paper introduced the study of the control apparatus for open mill mixing technology main featured with 8031 single chip apparatus.

18. 该方法是将配方中各组分分散混合后,通过双螺杆机熔融、混炼、挤出、冷却、干燥、切粒和包装。

In the formula of the method, all components are dispersed to be mixed and are subject to melting by a double screw extruder, mixing, extrusion, cooling, drying, granulating and packaging.

19. 该方法是将配方中各组分分散混合后,通过双螺杆机熔融、混炼、挤出、冷却、干燥、切粒和包装。

In the formula of the method, all components are dispersed to be mixed and are subject to melting by a double screw extruder, mixing, extrusion, cooling, drying, granulating and packaging.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!