
词语导航
基本信息
词语:固定轴承
繁体:固定軸承
拼音:gù dìng zhóu chéng
英语翻译
【化】 fixed-type bearing
分词翻译
固定的英语翻译:
fix; moor; peg; rivet; root; secure; tackle
【计】 lock-up
【化】 anchorage
【医】 fix; fixation; fixing; fixity; immobilize; lock
轴承的英语翻译:
bearing
【化】 bearing
翻译例句
1. 根据要求可采用进口轴承,驱动器固定轴承。
Imported bearing and locked bearing at D-end on request.Www.weNtiyI.coM
2. 弹性轴承、中心部件和缓冲器安装在悬臂固定在桥上的部分。
The elastomeric bearing, the centering member and the buffers are mounted on a cantilever on the fixed part of the bridge.
3. 固定型轴承形成一组薄型轴承。
Fixed section bearings form one group of thin section bearings.
4. 在轴承配置的非固定侧采用适合振动场合的CARB轴承,可以形成性能和可靠性俱佳的自调心轴承系统。
Using CARB bearings in vibratory applications on the non-locating side of the bearing arrangement will result in a self-aligning bearing system with better performance and reliability.
5. 两个舵轴承螺栓固定在机身尾部的舵机身。
Two rudder bearings bolt to the rear fuselage to fix the rudder to the fuselage.
6. 往往其中一个构件固定,轴承起支承运动件的作用。
Often one of the members is fixed, and the Bearing ACTS as a support for the moving member.
7. 使一轴承套圈或垫圈相对于另一固定的套圈或垫圈开始旋转所需的力矩。
To a bearing ring or the washer relative to other fixed rings or washers to rotate the required torque.
8. 如果齿条固定,小齿轮装在工作台的轴承上,而工作台所在的导轨与齿条平行,那么小齿轮的轴转动时,就会带动工作台平行齿条而移动。
If the rack is fixed and the pinion is carried in Bearings on a table guided on tracks parallel to the rack, rotation of the pinion shaft will move the table parallel to the rack.
9. 辊环将被固定在主轴上,主柱由滚珠轴承带动。该构造能提供最强的刚性。
The rolls to be ground are fixed in a main shaft running on ball takeings, designed to offer the maximum rigidity.
10. 起到支撑固定作用,并与安装轴承的托架相连接。
Play a role in supporting fixed, and the installation of the bearing bracket connected.
11. 其特征在于车针被直接固定在涡轮上,并作为滑动轴承的一部分,直接被当作转子轴。
It features that a needle is directly fixed to turbine, and used as part of sliding bearing and directly as rotor axle.
12. 下盘中间的轴承中以键固定着喷粉机的主轴。
The bearing at the bottom plate center is fixed with the principal axis of the duster.
13. 浪形的两部分由铆钉固定,用于高负荷运行的轴承。
Two wave-shaped in part by the rivets, bearings for high load operation.
14. 本研究从固定式三油楔动压滑动轴承动态工作状况分析入手,分析了固定三油楔动压滑动轴承的原理以及变载荷工况下的受力状态;
The thesis come from the analysis of stationary type tri-oil wedge dynamic-pressure sliding bearing dynamic working condition, analyse its elements and stress in variable-load operating mode.
15. 在内圈的一端,轴承通过偏心锁定环(图1.7)或者两个定位螺钉(图1.8)被固定在轴上。
At one end of the inner ring, the bearing is clamped to the shaft with an eccentric locking ring (Figure 1.7) or with two setscrews (Figure 1.8).
16. 介绍HOWDENVNT型固定密封空气预热器的设计特点,如固定式密封系统、双重密封、驱动系统和轴承等。
The design features of HOWDEN VNT type stationary sealed air preheater, such as stationary seal system, double seals, driven system and bearings etc. are described.
17. 第二代在外滚道上有一个用于将轴承固定的法兰,可简单的将轴承套到轮轴上用螺母固定。
The second generation in the outer raceway has a flange bearing fixed, will be simple bearing sleeve to the shaft is fixed by the nut.
18. 结果表明,油膜涡动角度的变化对三油楔固定瓦滑动轴承的静、动特性和稳定性将产生很大的影响,且这种影响随油膜涡动半径增大而增大。
The results show that the change of oil-film whirl angle makes the characteristics of journal bearing change greatly, and the more the whirl radius is, the more the influence is.
19. 通过大变形理论和ANSYS程序分析了几种轴承橡胶密封圈的固定压缩和密封压缩下的变形和应力情况。
According to the theory of large distortion and the program of ANSYS, some seal structures made of rubber and steal are analyzed.
20. 此种电动机具有对轴承预压固定与吸振的功能。
The motor has the functions of repressing and fixing the bearings and absorbing shock.
21. 二元系系统由被动的,无固定磁定模板组成,轻质复合材料构造而成,且具有双轴移动活塞,在空气轴承中滑动。
Two component system consists of passive, magnet-free stationary platen, constructed of lightweight composite materials, and dual axes moving forcer, gliding on the air bearings.
22. 其关键在于衣帽挂钩盘(2)的中心装有滚动轴承(7),上面可以固定各种彩陶或雕塑工艺制品。
The key point is that the center of the hook tray for caps and dresses (2) is provided with a rolling bearing (7) which can be used for fixing various faience or sculpture handicrafts.
23. 从不同的角度分析了几种典型的磨粉机磨辊固定方式:磨辊轴与轴承间采用紧定套的连接方式适合用于低成本的小型单式磨粉机;
Several typical fixing methods for mill roller are analysed: tightening sleeve between roller shaft and bearing is suitable for small-sized mill with low cost;
24. 轴承座分 别将两根执行丝杆及位置传动丝杆固定在底座上;
By bearing seat two executing screw shafts and position driving screw shafts are set on the base plate.
25. 采用基于固定界面模态综合法的降维方法对大型实际非线性转子-轴承系统稳定性进行了分析。
A reduction calculation method based on fixed interface component mode synthesis is applied to analyze nonlinear dynamic stability of an actual large-scale rotor-bearing system.
26. 分析了航空发动机附件机匣轴承衬套采用松螺纹固定的结构在高温时失效的原因。
Failure of bearing bush fixture is investigated in accessory gearbox of aeroengine. An improved fixing stud with interference is used to fix the bearing bush.
27. 小齿轮由轴承座固定支撑。
The small gear is fixed and supported by a bearing seat.
28. 安装带座外球面球轴承时,将轴承套在轴上,先将轴承座牢固地固定在支承面上,然后将轴承紧固在轴上即可。
The desiring installation method of installing insert ball bearing unit is: first install the housing at support base firmly, then tighten the bearing to the shaft.
29. 轴和轴承地内圈扭转在一同,而外圈和传输地住房是固定地。
The shaft and the bearing"s inner race rotate together, while the outer race and the transmission"s housing are stationary.
30. 轴和轴承地内圈扭转在一同,而外圈和传输地住房是固定地。
The shaft and the bearing"s inner race rotate together, while the outer race and the transmission"s housing are stationary.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
