
词语导航
基本信息
词语:顶形的
繁体:頂形的
拼音:dǐng xíng de
英语翻译
【医】 tectiform
分词翻译
顶的英语翻译:
apex; tip; equal; go against; gore; retort
【医】 apico-; cacumen; cupola; cupula; cupulae; cupule; fastigium; summit
vertex
【经】 top
形的英语翻译:
appear; body; compare; entity; form; look; shape
【医】 appearance; morpho-; shape
翻译例句
1. 洗礼盆放在一圆顶形的华盖下面,四周环绕着柱子和后堂回廊,这是由拜占庭人首先使用的建筑特色。
The font itself was set beneath a dome-shaped baldachin and encircled by columns and an ambulatory, features first used by the Byzantines.
2. 每一款都有不同的耳塞头:有圆硅胶顶的,有三边塞子形的和泡沫圆柱形的等等。
Each type comes with different tips: silicone domes, triple-flange stoppers, foam cylinders and so on.
3. 他们没花多少时间就给他找来了欧洲式样的衣服,甚至还有一顶阔边呢帽(就是常见的那种圆筒形有圆边的帽子,译注)。
In short order, they made European clothes for him, even finding him awide-awake hat.
4. 本文根据不同煤体强度条件下综放开采顶煤的位移曲线,采用盒维数的分形计算方法对其进行了维数分析。
Based on the displacement curves of top coal with different strength, the fractal dimension of which is analyzed and calculated according to the box dimension.
5. 叙述了在软土地区进行大角度斜交箱形地道桥的顶进施工及遇到的问题和处理措施。
Push thrust construction, problem and treatment measures of frame bridge with big skew angle in soft ground are described in this paper.
6. 为了提高二值图像的压缩比,采用自顶向下的编码方法,提出一种基于等腰直角三角形的分形图像压缩算法,并进行仿真实验。
In order to improve the ratio of binary image compression, using top-dowm method of coding, bring forward a fractal image compression method based on isosceles right triangle, and simulated.
7. 本文给出了三角形两边上具有某同一特性的顶边线的大小与所在边的大小之间的相互制约关系。
In this paper, we give the restrictive relation between size of two AS-lines with some features and size of corresponding with AS-lines of triangle.
8. 分析了标准和齿顶修形渐开线齿轮的轮齿本体温度和瞬时接触温度及相关因素对它们的影响。
Factors influencing the tooth bulk temperature and the surface transient contact temperature of involute gears with standard and modified tooth profiles are investigated.
9. 推导出用三顶点的测地坐标计算地球椭球面上三角形面积的公式。
The formula for area of triangle on ellipsoid by means of geodesic coordinate is derived in this paper.
10. 科林斯式柱型风格,较晚出现,采用带叶形饰的钟状柱顶。wwW.WentIYI.COm
The Corinthian order, a later development, introduced lonic capitals detailed with acanthus leaves.
11. 对驱动轮轮毂原铸造工艺进行凝固模拟,找出缺陷的成因,并对原工艺进行了改进,采用顶置随形压边浇冒口。
The solidification process of a driving wheel hub cast with former foundry method was simulated to find out the reason causing shrinkage defects.
12. 黛西的脸在一顶三角形的浅紫色帽子下面歪向一边,满面春风、心花怒放地朝我看着。
Daisy"s face, tipped sideways beneath a three-cornered lavender hat, looked out at me with a bright ecstatic smile.
13. 该鞋垫由通常为足形的底层制成,该底层具有从踵部区域延伸至脚趾区域的长度、顶表面以及底表面。
It is made from a generally foot-shaped bottom layer having a length extending from a heel area to a toe area, a top surface and a bottom surface.
14. 每个塔有四部分:塔基、塔身、塔尖和葫芦形的五面开口的顶。
Each pagoda has four parts: the base, the body, the cap and a gourd-shaped top with five openings.
15. 从理论的高度对大跨度顶进箱形框架的工作原理进行分析。
The operational principle of large span driving box frame is analyzed.
16. 自交后代基本保持了原有的果形和果顶,但也可分离出长圆形、平顶的个体。
The original fruit shape and fruit top were kept in self-crossed progeny, but a few of plants with oblong fruit shape and flat fruit top also appeared.
17. 在一个水平的柱顶和一个倾斜的屋顶之间的一个三角形的山形墙。
A triangular gable between a horizontal entablature and a sloping roof.
18. 介绍了一种实用的内侧槽抽芯机构,可利用螺旋形弹簧钢板的顶出变形实现内侧抽芯,并阐述了抽芯机构的工作过程和关键技术。
A practical mechanism for the core-pulling of inside groove was presented. The core-pulling was achieved by applying the deformation of helical spring steel sheet during the ejecting process.
19. 地质界面模型是由煤层的顶底板插值曲面经煤层边界和断层曲面裁剪而成的,地表面模型是对原始地表数据和矿坑数据进行三角剖分得到的三角形网格。
The interpolation face of coal seams is trimmed by boundary and the closed polygons of up and down faulted blocks to form the deposit interface model. The earths surface model is founded.
20. 在支撑臂定位座的上壁顶口处对应支撑臂的滑动槽设置凸形滑动块;
The location slider of the support arm is cooperated to the sliding-groove of the sliding column to form to sliding mechanism.
21. 本发明既能适于水稻钵形秧苗又便于下顶出式播秧机播秧的下顶播秧。
The seedling culture method is not only suitable for pot-typed rice seedlings, but also convenient for bottom ejection type seedling planting machine to carry out lower ram seedling planting.
22. 针对薄壁墩、花瓶墩等结构,提出墩顶带拉杆的Y形墩模型,给出了墩顶拉力的简化计算公式。
For the thin-walled pier and the vase pier, the paper proposed a model of Y-shaped pier with a bar on the pier-top and put forward a simplified formula for the pulling force on the pier-top.
23. 针对薄壁墩、花瓶墩等结构,提出墩顶带拉杆的Y形墩模型,给出了墩顶拉力的简化计算公式。
For the thin-walled pier and the vase pier, the paper proposed a model of Y-shaped pier with a bar on the pier-top and put forward a simplified formula for the pulling force on the pier-top.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
