径向应力用英语怎么说,径向应力的英文翻译


词语导航

基本信息

词语:径向应力

繁体:徑向應力

拼音:jìng xiàng yīng lìWwW.WeNTIYi.cOM

英语翻译

【化】 radial stress

相关词条

1.radialstresses  

分词翻译

向的英语翻译:

always; at; be partial to; direction; face; out; to; toward
【医】 ad-; ak-; ob-

应力的英语翻译:

stress
【化】 stress
【医】 stress

翻译例句

1. 采用一次拉延成型,并在其底部预冲工艺孔,可控制径向应力的大小。

The drawing process for producing the part is completed in one operation, and a hole for machining use is pre-punched to control the magnitude of radial stress.

2. 径向应力的分布与油膜压力的分布相同,压应力存在于油膜压力区域。

The distribution of radial stress is the same as that of oil film pressure, which means compressive stress at the pressure region.

3. 此处环板的径向应力应变分布成斜直线,高应力应变区域集中在环板内部。

Distributing of stress and strain on 45o section is declining line, high stress and strain focus on inside of enforced loop plane.

4. 直接对曲梁剪应力的积分方程求解,导出了曲梁剪应力和径向应力的计算公式。

The shearing-stress formula in curved beams can be derived by solving directly an integral equation, and the formula for radial stresses is also presented in this paper.

5. 给出了计算曲梁剪应力和径向应力的一种新方法,即直接对剪应力积分方程进行求解。

A new method for analyzing shearing and radial stresses in curved beams is put forward in this paper.

6. 在围岩质量较差时,渗流效应对圆形洞室径向应力的影响比围岩质量较好时的影响大。

The influence of seepage effect on radial stress around circular opening is more significant in poor quality rock mass than in good quality rock mass.

7. 提出了偏心受压的钢管混凝土考虑钢管径向应力梯度对紧箍作用影响的核心混凝土的应力-应变关系模型。

A stress-strain relation of core concrete is presented, in which the confinement effect of steel tube to core concrete is modified by the circumference stress grade.

8. 布喇格中心波长的偏移与轴向应力、径向应力和温度等变化量均呈极好的线性比例关系,且在较大的测量范围内一直保持线性关系。

The relative shift of Bragg center wavelength increased linearly with the change of axial stress, radial stress or temperature, and it kept the linear relationship in a large range.

9. 通过构筑PM空间密度函数,求出饱和岩石的应力—应变状态方程,并模拟了其轴向应变—径向应变滞后回线。

Through constitution of PM space density function, the stress-strain state equation for saturated rocks has been defined and the hysteresis loops of axial stress-radial stress has been simulated.

10. 和多厚环过盈套装的方法结合起来装配飞轮,可以有效地增大径向压应力,缓和环向应力;

The method of combination of the two ways can availably increase the radial compressive stress and smooth the hoop stress.

11. 根据轴向应力对棒料剪断方式及其断口形状的影响,设计了对螺帽锻造所用热轧棒料能进行精密剪切下料的新型结构的径向支持下料模具。

The die for the blanking under the radial clamp of nuts for 1C engine is designed based on The effect of radial stress on the shearing method for bars and the fracture shape.

12. 钢管周向和径向的应力值不大,而轴向应力值较大,最大轴向应力出现在钢管与芯模的接触部位。

The axial stress on the steel tube which appears on the contact region of the steel tube and mandril is larger than the radial and circumferential stress.

13. 钢管周向和径向的应力值不大,而轴向应力值较大,最大轴向应力出现在钢管与芯模的接触部位。

The axial stress on the steel tube which appears on the contact region of the steel tube and mandril is larger than the radial and circumferential stress.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!