壳程用英语怎么说,壳程的英文翻译


词语导航

基本信息

词语:壳程

繁体:殼程

拼音:ké chéng

英语翻译

【化】 shell pass; shell side

分词翻译

程的英语翻译:

order; rule
【化】 range

翻译例句

1. 壳程水冷设备的水垢清洗很困难。

The cleaning of water scale for shell side cooling equipment was very difficult.

2. 给出了管程和壳程垫片螺栓预紧力的计算方法。wWW.wEntIyI.cOM

The calculation method for bolt pretightening force of tube side gasket and shell side gasket were proposed.

3. 加热介质流过加热器管,而燃气则注入加热器壳程。

The heating medium will flow through the heater tubing while the fuel gas will fill the shell side of the heater.

4. 安装一个钩子子程用来接收对加壳程序有用的通知。

Installs a hook procedure that receives notifications useful to shell applications.

5. 原料气和渗余气在壳程内流动,而管程内为渗透气。

The feed and nonpermeate outlet gas are on the "shell" side, and the permeate gas is on the "tube" side.

6. 本发明涉及一种壳程被分隔为多个腔室的固定床反应器。

The invention relates to a fixed-bed reactor, a shell side of which is divided into a plurality of Chambers.

7. 对于壳程来说,重点是对壳程支撑结构或折流板的研究。

For the shell side, concentrates are often put on the study of the tube bundle supporters or baffles.

8. 加氢装置用双壳程换热器分为法兰式和螺纹锁紧环式两种。

The double shell side heat exchanger for use in hydrogenated unit is divided into two kinds of flange type and thread lock ring type.

9. 紧力测试对热交换器的管程与壳程,检查法兰垫圈是否紧密。

Tightness test both the shell and tube sides of the exchanger to check that the flange gaskets are holding tight.

10. 缠绕式膜组件消除了沟流现象,并有利于壳程流体的径向混合。

With helical wound module, channeling phenomenon can be relieved, and hollows fiber membranes can act as spacer in the shell.

11. 提出了一种管壳式换热器壳程单相流动和传热的三维模拟方法。

A three dimensional thermal-hydraulic model is developed for the analysis of fluid flow and heat transfer in shell-and-tube heat exchanger.

12. 本文重点介绍了双壳程换热器的结构、制造特点和使用注意事项。

The structure, manufacture feature and matters needing attention in operation of double shell side heat exchanger a...

13. 这些措施显著降低了壳程阻力和滞流区,壳程的气体接管方位可任意选定。

These measures significantly reduce the resistance and laminar flow zone in the shell side. The gas pipe connection orientation on the shell side can be freely selected.

14. 本文通过壳程和管程两方面进行强化传热,来研究与开发新型高效换热器。

Through reinforcing heat transfer by changing monitor and shell, research and development of new high-activity heat exchanger were made.

15. 同时,随着螺旋角的增大,螺旋折流板换热器的壳程压力损失呈下降趋势。

Furthermore, the pressure drop in helical baffles heat exchangers gets down with the increase of helical Angle.

16. 但限于换热器结构的复杂性,其壳程流体的流动和换热细节信息还不甚清楚。

However due to the complexity in the structure of the heat exchanger, the detailed information of the fluid flow and heat transfer in the shell side can scarcely be described.

17. U型管式换热器芯子制作后应进行壳程水压试验,以确保管接头及管不泄漏。

After the fabrication of the U type tubular mode heat exchanger core is completed, the shell side hydro-test shall be performed in order to protect the joints of the tube and the tube from leakage.

18. 壳程流体在较低的雷诺数时就可获得湍流流动,因此,壳程适合低密度流体。

Turbulent flow is obtained at lower Reynolds Numbers on the shell side, so that the fluid with the lower mass flow preferably goes on that side.

19. 在奥氏体不锈钢制再沸器的上管板与壳程筒体焊接的管板一侧发生蒸气泄漏。

The steam leakage was occurred on the welding zone of the tube sheet of the austenitic stainless steel heat exchanger.

20. 本文讨论了在传热计算中螺旋板换热器与单壳程、单管程列管式换热器的差异。

The difference of heat transfer calculation between spiral plate heat exchanger and single shell and tube heat exchange is discussed in the article.

21. 折流杆换热器壳程结构复杂,用理论方法难以获得壳程流体流动和强化传热机理。

The shell side of the rod baffle heat exchanger is so complicated that the flow field and enhanced heat transfer mechanism of the shell side cannot be commentated by the theoretical method.

22. 且 冷却器本体在底座上可自由伸缩移动,消除壳程因温差膨胀而产生的热应力;

The chiller noumenon on the base can freely do telescopic movement to eliminate the heat stress caused by the shell process caused by the dilation of different temperatures.

23. 较低的封装分率下,组件壳程对流作用明显,有利于减少死区,充分利用膜接触面积。

Under low packing density, convection is significant in shell-side flow, which is preferable for the reduction of dead zone area and the higher utilization of contacting area.

24. 介绍了溶剂气冷却器振动原因是进口区域的横流速度大于临界速度,以及壳程结构不合理。

Investigation was showed that the vibration of solvent vapor cooler was caused by excessive flow velocity and improper shell structure.

25. 本文结合克劳斯硫磺回收工艺过程,对过程气换热器壳程结构上采取的特殊作法进行了讨论。

This paper discusses some specific practices to shell structure of process stream heat exchanger on the basis of Claus sulfur recovery process.

26. 为此,配制一定浓度的溶液分别对表面冷凝器壳程进行药洗、管程进行酸洗,取得了良好效果。

It is effective to wash its tube pass with some solution and its shell pass with acid.

27. 可更经济合理地用单台换热实现管程水蒸汽的冷凝及其凝结水的冷却、壳程介质被加热的换热过程。

By using this method, the process of the condensation of the vapor, the cooling of the condensed water and the heating of the content at shell side can be…

28. 以往对换热器壳程流场和温度场的数值模拟都是建立在多孔介质模型基础上进行的,存在许多问题。

Generally the numerical stimulation on flow field and temperature field of shell distance is based on porous medium model.

29. 非对称流设计,管程与壳程容积不相同,(壳容积最大能达到管容积的4.2倍),满足多种复杂工况。

Asymmetric design, products with different cubage between the length of tube and shell (cubage of the shell is 4.2 more than the tube), meet the complex requirement of project. to.

30. 当加壳程序即将被激活时、当处在最顶层的窗口被创建或者销毁时,系统会调用WH_SHELL钩子子程。

The system calls a WH_SHELL hook procedure when the shell application is about to be activated and when a top-level window is created or destroyed.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!