
词语导航
基本信息
词语:轴顶
繁体:軸頂
拼音:zhóu dǐng
英语翻译
【建】 crown of roll
分词翻译
轴的英语翻译:
axes; axis; shaft; spindle
【医】 ax-; ax.; axes; axio-; axis; core
顶的英语翻译:
apex; tip; equal; go against; gore; retort
【医】 apico-; cacumen; cupola; cupula; cupulae; cupule; fastigium; summit
vertex
【经】 top
翻译例句
1. 本公司设计的XHJP系列顶轴油系统适用于新建机组配套及在用机组顶轴油系统改造。
Our XHJP series jack pump system applies to new unit and restructure of current jack pump system.
2. 新型精压模的上模设有顶件装置锻件半轴的拔模斜度小锻件半轴的金属敷料少。
There is a shedder on the upper die of the new type of finish forging die so that pattern draft Angle of half axle of forging is small oversize for machining is little.
3. 收、卷采用无轴气动锥顶装置,单独电机驱动,双工位收放料,不停机高速自动接料功能,提高了工作效率。
Reeling is equipped with shaft - less pneumatic cone top device, individual motor drive, double work - place, non - stop high speed automatic picking function, which upgrades the working efficiency.
4. 同时随着新上机组容量的增大,转子的重量也随之加大,对顶轴油系统的要求也越来越高。
As the volume of newly operated unit increases, rotor"s weight increases as well and has higher requirement for jack pump system.
5. 实测数据分析表明,管节开始顶进时轴力随顶进距离增大而增大,顶进到一定距离后,基本维持在一定范围内。
Field data were analyzed. It showed that axis force increased along with pipe jacking at the very start, and it maintained stated basically when jacking to a certain distance.
6. 新型精压模的上模设有顶件装置,锻件半轴的拔模斜度小,锻件半轴的金属敷料少。
There is a shedder on the upper die of the new type of finish forging die, so that pattern draft Angle of half axle of forging is small, oversize for machining is little.www.WEnTIYi.coM
7. 偏X-Y双轴式光电跟踪系统可以解决过顶跟踪问题,其跟踪范围与规则X-Y双轴式光电跟踪系统相比有很大提高。
X-Y double-axis gimbal by X axis transferring D could track objects near zenith, has wider tracking region than regular X-Y double-axis gimbal.
8. 渐缩型间隙在叶片前半轴弦受到上通道涡的抑制,减少了叶顶间隙泄漏涡的强度和范围;
Suppressed by the up passage vortex at upstream side of blade, the intensity and scale of the tip clearance leakage vortex is decreased.
9. 一个车床是一种机床切削金属的外貌之间的一个圆的事变系两个车床顶心和围绕它的轴转动。
A lathe is a machine tool for cutting metal from the surface of a round work fastened between the two lathe centers and turning around its axis.
10. 作业时,顶杆和滚筒一起转动,轴和滑板固定不动。
At operation, the ejecting rod rotates with the roll, the shaft and chute boards maintain static.
11. 艉轴管镗孔加工专用刀具,包括刀柄、刀片及顶丝。
A screw shaft tube boring process professional cutter is provided, which comprises a shank, a blade and a jbckscrew.
12. 《踏歌图轴》以风格特点表现在或峭蜂直上而不见顶;
Now select the "Stomping map " style. characterized by steep bee straight in or not peaked;
13. 结果表明,锚杆轴力和桩顶位移满足要求,支护结构安全。
Monitoring results show that the axial stresses and displacement of pile top can satisfy requirements, and the supporting structure is safe.
14. 安装在外球面轴承宽内圈上的钢圈,有顶丝旋入内圈上的孔里并与轴接触。
Install outer spherical bearings wide inner ring on the rim, with the top wire screw hole on the inner ring and engagement with the shaft.
15. 安装在外球面轴承宽内圈上的钢圈,有顶丝旋入内圈上的孔里并与轴接触。
Install outer spherical bearings wide inner ring on the rim, with the top wire screw hole on the inner ring and engagement with the shaft.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
