临界数值用英语怎么说,临界数值的英文翻译


词语导航

基本信息

词语:临界数值

繁体:臨界數值

拼音:lín jiè shù zhí

英语翻译

【建】 critical value

分词翻译

临界的英语翻译:

critical
【医】 crisis

数值的英语翻译:

numerical value
【计】 value of number
【经】 numerical value; quantitative value

翻译例句

1. 而- 1正是这个临界点处的函数值,所以,这是一个最小值。

And minus one happens to be the value at the critical point. So, it is a minimum.

2. 一个临界变数是路径的数值,你以回声$路径指令能在指令行检查。

One critical variable is the value of PATH, which you can check at the command line with the echo $PATH command.

3. 给出了周向初应力数值特征对端部受推力竖直向上加速圆柱壳弹性屈曲形式和临界力的影响。

The inflectional form and the critical value"s effect imposed by circumferential initial stress character on cylindrical thin shell beard the thrust at axis, accelerating upwards erect.

4. 用RFPA软件对钻孔冲击进行了数值模拟,验证了钻孔冲击实验得出的临界压力,并研究了钻孔冲击前、后的应力降及声发射等特征。

The software RFPA is used to simulate the borehole burst, validate critical pressure, and research the stress drop and acoustic emission before and after occurring the burst in the borehole.

5. 应用一种数值寻根法分析了系统的临界车速。

A roots-locating numerical method was used to identify critical speed.

6. 通过数值计算和分析,给出了临界速度与冲击质量、线性强化模量及临界时间间的关系。

By numerical computation and analysis the relationship among critical velocity and impact mass, hardening modulus, buckling time was given.

7. 通过理论分析、实验和数值计算研究了激光二极管点火的热作用机理,分析了点火的临界值及影响因素。

Thermal interaction mechanism of laser diode ignition is investigated through theoretic analysis, experiments and numerical calculations. The critical values and impacting factors are analyzed.

8. 给出了周向初应力数值特征对轴向压力圆柱薄壳临界值的影响,给出数值结果。

The numerical result and the critical value"s effect imposed by circumferential initial stress numerical character on cylindrical thin shell beard the press at axis.

9. 通过理论分析和数值计算,得到了临界速度与冲击质量、临界长度及线性强化模量间的关系。

The relationship among critical velocity and impact mass, critical buckling length, hardening modulus is given by using theoretical analysis and numerical computation.

10. 而后,根据指标数值的离散情况确定安全合理的临界值。

The safe and rational critical value can be determined according to the descrete state of index values.

11. 使用该方法计算临界转速,数值稳定性好,计算精度高,容易编制通用计算程序。

The method in this paper has better numerical stability, higher computation precision, and it is easy to develop a general computer program.

12. 数值算例表明,对于复合材料旋转壳,横向剪切变形使其临界载荷降低;

The examples show that the critical load of composite shells of revolution will decrease when considering the transverse shear deformation.

13. 运用这种方法对单层介质和二层介质的临界问题以及单层介质非临界问题进行了求解,而且得到了较满意的数值解。

For monolayer and two-layer spherical critical problem and for monolayer noncritical problem, the application by this approach gives the corresponding solutions and satisfactory numerical results.

14. 通过数值计算给出了临界载荷随中间支座位置变化的关系,以及中间支座为弹性支座时,其弹性系数同临界载荷的关系。

Using the numerical method, the relationship of critical load to the position of median support as well as to the elasticity factor were given for elastic support.

15. 采用计算流体力学软件CFX对超临界水冷堆主容器出口管的温度分布进行数值分析。

The numerical analysis was performed on temperature distribution of the outlet nozzles in main vessel of SCWR(supercritical water reactor) by using computational fluid dynamics software CFX.

16. 它的蒸汽温度和压力超过其用在传统超临界电厂中的数值。

It is based on increased steam temperatures and pressures, beyond those traditionally employed for supercritical plants.

17. 通过现场实测、相似模拟和数值计算得出了大倾角临界角煤层回采巷道塑性区的分布情况。

Through the site observation, the simulation and the numerical value computation, obtained the gateway plastic area in high-pitched and critical Angle seam.

18. 应用数值计算的方法计算了谐振势阱中有弱相互作用的玻色气体凝聚的临界温度和基态占据率。

The critical temperature and the ground state fraction of weakly interacting Bose Einstein condensation in a harmonic potential trap are calculated with numerical method.

19. 详细介绍了用解析解法和数值解法(即矩阵方程的多项式解法)分别求出了基元回路为正方形的“田”字形超导网络在外磁场中的临界温度,结果表明两种计算方法是完全等价的。

The critical temperature of superconducting network which is composed of square unit loops in external magnetic field is solved by means of analytic method and numeric method I.

20. 采用有限元数值模拟方法,分别计算了这两种特大型起重桅杆在顶端钢丝绳斜拉条件下桅杆吊重的线弹性屈曲临界载荷。

The critical loads of linear elastic flexuosity were computed for 64,80 m hoist masts under the condition of inclined steel cable on the top using finite numerical simulation method.wWW.WeNTiYi.Com

21. 由计算所得的KI和KII数值解,得到了裂纹垂直于层面时此泥板岩的临界断裂曲线。

The critical fracture curve when cracks are vertical to the layered rock mass has also been obtained by using numerical values KI and KII.

22. 给出了导致骑浪发生的危险临界参数值,以及周期运动和骑浪运动区域划分。

The dangerous value of control parameter which leaded to surf-riding and the domain of periodic motion and surf-riding were given.

23. 数值计算了该模型系统渗透率在临界点处的标度指数。

The scaling exponents of the permeability are calculated at the percolation critical point.

24. 在对临界角效应定性研究的基础上,提出了用阶梯光刻热熔法来扩展热熔型微透镜阵列的数值孔径范围。

Based on the study of the critical Angle effect, a new method named step heat-forming photoresist method to expand the N. A. range of microlens array is presents.

25. 同时还测定了上述物质直至接近临界点的蒸气压及饱和液体密度,并提供了与温度关联式的系数值。

Vapor pressures and saturated liquid densities for all above compounds were also determined near the critical points, and the coefficients of correlation to temperature are provided.

26. 采用非结构化四面体网格,对某600MW超超临界汽轮机组高压主汽调节联合阀的额定工况进行了数值模拟。

Unstructured tetrahedral meshes are used to simulate the flow field inside high pressure combined valves of a 600mw ultra supercritical steam turbine under the nominal condition.

27. 临界机组群单机等面积定则第一摇摆稳定判据与时域仿真角度准则精度相同,但具有数值积分时间短的优点;

The proposed critical machine group single machine equal area criterion needs less computation time compared with the traditional time domain simulation.

28. 将与曲线拐点切线和最大值水平直线交点相对应的长径比值定义为纤维临界长径比,将与此相对应的函数值定义为弹性模量临界值。

The critical aspect ratio of the fiber is defined as the crosspoint of the tangent value of the inflexion and the asymptote of the maximum elastic modulus.

29. 而挠性转子在接近或超过其第一、二阶临界转速时,转子处于共振状态,这时动挠度达到很大的数值。

The dynamic deflection may become very large due to resonance in case of the flexible rotor speed approaching or exceeding its 1st or 2nd order critical speed.

30. 而挠性转子在接近或超过其第一、二阶临界转速时,转子处于共振状态,这时动挠度达到很大的数值。

The dynamic deflection may become very large due to resonance in case of the flexible rotor speed approaching or exceeding its 1st or 2nd order critical speed.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!