
词语导航
基本信息
词语:氧化层
繁体:氧化層
拼音:yǎng huà céng
英语翻译
【机】 layer of oxide
相关词条
1.oxidizinglayer 2.layerofoxide 3.zoneofoxidation 4.oxidativehorizon 5.oxichorizon分词翻译
氧化的英语翻译:
combustion; oxidation; oxidize; oxygenation【化】 adduction; oxidation
【医】 oxidation; oxidization; oxidize; oxy-; oxydation; oxygenize
层的英语翻译:
layer; region; stage; story; stratum; tier【计】 layer
【医】 coat; lamella; lamellae; lamina; laminae; layer; strata; stratum
翻译例句
1. 所述氧化层的部分被移除,以使所述沟槽填充的氧化层作为第一多晶硅层基本平面化。
Portions of the oxide layer are removed to substantially planarize the trench-filled oxide layer as the first polysilicon layer.www.wentiyI.coM
2. 铝表面的氧化层是一种电的绝缘体。
The aluminum surface of the oxide layer is an electrical insulator.
3. 测出的氧化层厚度和时间的关系遵循c。
The relationship between thickness of oxidized layer and time agrees with c.
4. 采用本发明的方法可大幅提高栅极氧化层的均匀性。
The method of the present invention can greatly increase evenness of the grid oxide layer.
5. 一个相关层是场氧化层,使其与其它器件结构分离。
A related layer is the field oxide, which provides isolation from other device structures.
6. FLOTOX的可靠性与隧穿氧化层的质量密切相关。
The reliability of FLOTOX is correlative to the quality of the tunnel oxide.
7. 这就是为什么银氧化层“奇迹”地消失于的洗银水中。
This is why silver tarnish "miraculously" disappears in silver dip.
8. 这个结果和氮化会导致高密度氧化层电荷的事实相一致。
These are consistent with the fact that nitridation induces a high oxide charge density.
9. 阳极氧化是一种浓缩的天然氧化层形成的过程,对铝表面。
Anodizing is a process of thickening the natural oxide layer that forms on the surface of aluminum.
10. 提出了芯片门电路硅氧化层静电放电介质击穿的物理模型。
A physical model of dielectric breakdown was presented in IC silicon dioxide films.
11. 实验发现氧化层中的平均电子能量与衬底电压有很大的关系。
These experiments reveal that the average electron energy in the oxide depends on substrate voltage strongly.
12. 阳极氧化层的多孔的属性,使产品能够染上任何必要的颜色。
The porous nature of the anodized layer allows the product to be dyed any color that is required.
13. 经时绝缘击穿(TDDB)是评价薄栅氧化层质量的重要方法。
TDDB(time-dependent dielectric breakdown)is a key method to value the quality of thin gate oxide.
14. 超薄栅氧化层的可靠性是MOS集成电路中最重要的问题之一。
The reliability of super thin gate oxides is bne of the most important problems in MOS integrated circuits.
15. 在埋氧化层厚度不同的SIMOX衬底上制备了H型栅结构器件。
H-gate devices were fabricated on SIMOX substrates with different thickness of BOX.
16. 阐述了应用于EEPROM中的超薄隧道氧化层随时间的击穿特性。
The time dependent dielectric breakdown of tunneling oxide used for EEPROM"s is investigated.
17. 他们应当去掉场极板和氧化层,并在整个区域淀积一层薄的铝薄膜。
They should remove the field plate and oxide and deposit a thin aluminum film over this region.
18. 这种氧化层使钢板产生应力场,阻碍磁畴壁的位移,因而使铁损增加。
The subsurface oxide layers generated stresses in the sheet and impeded domain wall motion, so that the iron loss was increased.
19. 对渗铝层的显微组织、内氧化层的硬度分布及显微组织进行了初步分析。
The microstructure of aluminized layer, hardness distribution and microstructure of internal oxidation layer were investigated.
20. 当显微镜的尖端把正电压施加到材料表面时,它就在氧化层之间的空白处画出了导线。
When the microscope"s sharp tip applied a positive voltage to the material"s surface, it drew conducting lines that exist in the space between the oxide layers.
21. 热空穴注入的实验结果表明薄栅氧化层的击穿不仅由注入的空穴数量决定。
Hot holes injection experiments reveal that the life of oxide breakdown is not simply determined by the total number of injected holes.
22. 在所得结果的基础上,讨论了具有反铁磁氧化层的铁磁薄膜的自旋波共振。
On the basis of the results obtained, the spin-wave resonance of a ferromagnetic film with a surface of antiferromagnetic oxide is discussed.
23. 在阈值以上激光作用下不锈钢表面形成镜面,而在阈值以下则出现氧化层。
As the laser fluence exceeds the threshold a mirror surface appears, otherwise, an oxide layer will be formed.
24. 结果表明薄栅氧化层击穿的限制因素依赖于注入热电子量和空穴量的平衡。
The results show that the limiting factor for thin gate oxides depends on the balance between the amounts of injected hot electrons and holes.
25. 研究结果表明薄栅氧化层击穿的限制因素依赖于注入热电子量和空穴量的平衡。
The results show that the limiting factor in thin gate oxides breakdown depends on the balance between the amount of injected hot electrons and holes.
26. 重点研究了退化PMOS器件的高场退火效应和氧化层陷阱电子的退陷阱机制。
Also, High electric field annealing of stressed PMOSFET and detrapping of trapped electrons on the gate oxide are studied deeply.
27. 漆面的亮度和深度都大大下降,使漆面渐渐发白,构成氧化层,缩短车漆的寿数。
The surface brightness and depth are greatly decreased, the surface oxide layer formed gradually white, paint, shorten life.
28. 比较和分析了不同的可靠性测试方法,并对超薄氧化层生长工艺的优化进行了探讨。
Different accelerating methods for reliability test is analyzed and compared. Furthermore, the process optimization of thin oxides is discussed.
29. 建立能量平衡方程、钢坯导热微分方程、氧化层生成线性和抛物线增长的组合方程。
Energy balance equation, differential equation of heat conduction and combination of linear equation and parabolic equation of oxygen-layer forming are established.
30. 本文通过衬底热载流子注入技术,研究了热载流子增强的超薄栅氧化层TDDB效应。
Hot-carrier enhanced TDDB effect of ultra-thin gate oxide is investigated by using substrate hot-carrier injection technique.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
