台臂用英语怎么说,台臂的英文翻译


词语导航

基本信息

词语:台臂

繁体:臺臂

拼音:tái bì

英语翻译

【机】 table armwWw.wENtiyi.COM

分词翻译

台的英语翻译:

broadcasting station; dais; desk; platform; stage; support; table
【医】 table

臂的英语翻译:

arm
【医】 arm; brachia; brachio-; brachium; upper arm; upper limb

翻译例句

1. 厂内有制臂车间,配专用焊接机。两台臂式半径折弯机。和焊接站。

Our in-house capabilities include an arm fabrication shop with a dedicated seam welder, two arm radius-bending machines and welding stations.

2. 当ROS在一台机器人的内置计算机上启动时,它会要求对该机器人进行描述,其中包括如机械臂长度、结点旋转方式等信息。

When ROS boots up on a robot"s computer, it asks for a description of the robot that includes things like the length of its arm segments and how the joints rotate.

3. 他们用一台巨大的臂形装置,用力将哈勃拔出其所在的轨道,并将其放入“亚特兰蒂斯号”的货舱之中。

They used a giant armlike device to yank the Hubble out of its orbit and place it in the Atlantis’ cargo bay.

4. 在它所携带的10台科学仪器中,有两台仪器可以吸收并分析探测器机械臂所收集的岩石粉末样品。

Its 10 science instruments include two for ingesting and analyzing samples of powdered rock that the rover"s robotic arm collects.

5. 斧头把奥利奥一劈为二,然后一对机械臂会捡起两半奥利奥,接着饼干会被送到铣削台,把饼干上的奶油铣掉。

After the hatchet blade is lowered to split the Oreo, a pair of mechanical arms are dispatched to collect the cookie halves, which are transferred to a router table where the creme is removed.

6. 他进入其中一台,检查支臂上的触手状态正常后,用它的支臂将通往深渊的门开启。

He got into one, checked that the claws on its limbs were in good function, and used its arm to unseal the door into the Pits.

7. 介绍了自行研制的小型旋臂水池试验台的设计思想、结构形式及其主要技术问题。

A new type of small rotating arm basin tester, including its design theory, structure and main technical matters, is introduced in this paper.

8. 控制系统是整个试验台的核心,为此,本文设计了电动升降臂控制系统和温度控制系统。

The control system is the core for test-bed, for this, this text design the control system of the electric elevator and the control system of the temperature.

9. 方法用多功能手术台、C形臂X线机对31例胸腰段骨折脱位患者进行术中过伸复位研究。

Methods 31 cases of thoracolumbar fracture and dislocation have been studied during surgically hyperextensive reduction with multipurpose surgical table and C type X ray machine.

10. 现有一台多田野80吨汽车吊要处理,五节大臂,小钩副臂齐全,车况及性能良好,有手续。

Has more than a field 80 ton mobile crane to process, five big arms, the catch clow vice-arm is complete, the vehicle condition and the performance are good, have the procedure.

11. 离心力环境中振动台的动力学建模,采用了机臂为刚体的假设,这可能对振动台系统的运动特征作出不精确的结论。

The dominant motion equations are obtained on the basis of the hypotheses that the centrifuge arm is rigid. The imprecise conclusion of the vibrator motion may be induced.

12. 由一台变速电机传动,收线可成盘或成圈,用旋臂起重机能将线圈取下。

The take-up process can be used with coil or spool, and unloading with arm crane.

13. 电机(5)设置在提升臂(23)上并连接提升臂上面的工作台(9),工作台(9)可以自由旋转。

The motor (5) is arranged on the lifting arm (23) and is connected with a worktable (9) on the lifting arms (23); the worktable (9) can be rotated freely.

14. 电机(5)设置在提升臂(23)上并连接提升臂上面的工作台(9),工作台(9)可以自由旋转。

The motor (5) is arranged on the lifting arm (23) and is connected with a worktable (9) on the lifting arms (23); the worktable (9) can be rotated freely.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!