
词语导航
基本信息
词语:切速
繁体:切速
拼音:qiē sù
英语翻译
【电】 cutting rate
分词翻译
切的英语翻译:
anxious; be sure to; chip; chop; correspond to; cut; eager; knife; log; shear
shive; slice
【医】 cutting; incise
速的英语翻译:
fast; invite; rapid; speed; velocity
【医】 tacho-; tachy-
翻译例句
1. 以高于常规切速10倍左右的切削速度对零件进行高速加工。
The high speed machining method has part cutting speed as high as about 10 times that in conventional cutting.
2. 内容涉及基本原理、实验装置及加工参数对弧柱特性、切口宽度、切口角、无渣切速的影响规律。
The basic principle, test device, and the regularity of cutting parameters affecting to the arc characteristics, kerf width, kerf Angle, and dross free cutting speeds are dealt with.
3. 如果一切顺利,明年夏天将有6000辆有内置照明系统的深蓝色三速折叠式自行车呼啸在伦敦的大街小巷。
If all goes well, 6, 000 navy blue, three-speed, sit-up-and-beg bikes with an inbuilt lighting system will be whizzing around the capital"s streets next summer.
4. 工程区沉积物的平面及柱状分布及其物理力学指标、沉速、淤积切力、冲刷切力、固结过程、流变参数等的实验测定。
The plane and vertical distributions of sediment and its dynamical quota, sedimentary shearing velocity, sedimentary shearing force, erosive shearing force, solidification, rheological property, etc.
5. 我只是在尽一切的努力调整节奏,从快速到缓下来再到重新起速。
I just try to do a great job of changing pace, going from fast to slowing down to speeding back up again.
6. 对设计、安装、维修异周速切头飞剪有一定的参考价值。
The dissusion may be of reference value to the designing, instalment and repair of differential speed cutting crop shear.
7. 而随着气速增大,入口附近壁面切应力减小,腐蚀减轻。
On the contrary, with the gas speed increased, the wall shear stress near the entrance increase, the corrosion would mitigate.wWW.weNtIyi.coM
8. 采用气压张力,分切利速,结构合理,操作简单。
Use pneumatic tension, fast cutting, reasonable structure, and easy to operate.
9. 本发明公开一种电热水器上的速热式加热水箱。适用于淋浴房、厨房间等一切需要热水的场合。
The invention discloses a kind of electric boiler fast to be hot -like heats up the water tank, was suitable to showers the room, between the kitchen and so on all need hot water situations.
10. 圈速不是一切,我们还关注那些我们一直想提高的东西,这才是最重要的。
We don"t look just at lap times; we look at many other things that we are working on, and that is the most important thing.
11. 为了验证切向恒速运动方式的合理性,进行了工艺试验研究。
For conforming the rationality of the movement mode, the experimental investigations were carried out.
12. 为保证整体叶盘扭曲通道电解加工的顺利进行,提出了工具电极相对于工件的运动在全程中保持切向恒速的加工方式。
For guaranteeing the stability of blisk twisty tunnel in ECM, a process mode was presented, where the tangential velocity of cathode relative to workpiece kept steady in the whole process.
13. 为保证整体叶盘扭曲通道电解加工的顺利进行,提出了工具电极相对于工件的运动在全程中保持切向恒速的加工方式。
For guaranteeing the stability of blisk twisty tunnel in ECM, a process mode was presented, where the tangential velocity of cathode relative to workpiece kept steady in the whole process.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
