二烯聚合用英语怎么说,二烯聚合的英文翻译


词语导航

基本信息

词语:二烯聚合

繁体:二烯聚合

拼音:èr xī jù hé

英语翻译

【化】 diene polymerization

分词翻译

二烯的英语翻译:

【化】 diolefin; diolefine

聚合的英语翻译:

aggregation; converge; group; polymerization
【化】 polymerization
【医】 polymerism; polymerization; polymerize

翻译例句

1. 简称CR,由氯丁二烯聚合制得。

Short CR, obtained by the polymerization of chloroprene.

2. 本文综述了近五年双环戊二烯聚合材料进展。

Recent five-year development of polymer materials made from dicyclopentadiene is reviewed in the article.

3. 综述聚双环戊二烯聚合机理,反应注射成型技术概况。

The polymerization mechanism of PDCPD and technical survey of RIM are reviewed.

4. 研究表明,丁二烯聚合机理原则上同样适用于异戊二烯的负离子聚合。

The experimental results showed that the mechanism of anionic polymerization of butadiene was also fit for the anionic polymerization of isoprene.

5. 树脂(B)优选为不饱和键减少率为10%以上的共轭二烯聚合物环化物。

The resin (b) is preferred to be conjugated diene polymer cyclization material with unsaturated bond decrement rate more than 10%.

6. 以较佳配比所得到的催化剂颗料较小、分布均匀,催化丁二烯聚合反应活性高。

Under the better ratio, small particles appeared which dispersed uniformly and were of higher catalytic activity.

7. 一种化学机械抛光垫,包含由(A)苯乙烯聚合物和(B)二烯聚合物构成的非水溶性基质。

A chemical mechanical polishing pad comprising a water-insoluble matrix which comprises (a) a styrene polymer and (b) a diene polymer.

8. 以镍系催化剂为例,考察了溶解氧对丁二烯聚合系统的影响,并考察了使用升压器后的作用效果。

Taking nickel catalyst system as an example, the effects of dissolved oxygen on butadiene polymerization and the result of using the pressure-self-raising-unit were analyzed.

9. 根据我国镍系顺丁橡胶的生产数据和工艺方案,对釜式丁二烯聚合工艺进行了动力学分析和工程分析。

Based on the practical data and operation program, both kinetic and engineering analyses of nickel catalyzed butadiene rubber production by tank reactor in China were reviewed.

10. 生产方法是乳液聚合,和苯乙烯-丁二烯橡胶的生产过程相似,得到“热”橡胶和“冷”橡胶。

Produced by emulsion polymerization in a similar way to styrene-butadiene rubber processes, yielding both "hot" and "cold" rubbers.

11. 烯酮,特别是二甲基烯酮,很容易齐聚和聚合。

Ketenes, notably dimethyl ketene, readily undergo oligomerization and polymerization.

12. 烯酮,特别是二甲基烯酮,很容易齐聚和聚合。

Ketenes notably dimethyl ketene readily undergo oligomerization and polymerization.

13. 以100重量份的二烯橡胶为基准,芳香乙烯基聚合物的含量优选为5 ~ 150重量份。

An amount of the aromatic vinyl polymer is preferably 5 to 150 parts by weight based on 100 parts by weight of the diene rubber.

14. 利用季铵盐的固色原理,将二甲基二烯丙基氯化铵与丙烯酰胺的聚合物pda应用于绒面革固色。

The quaternary ammonium salt polymer PDA was applied on dye fixation process for pigskin suede leather on the basis of dye fixation principle of quaternary ammonium salts.

15. 本文介绍了环戊二烯选择加氢制聚合级环戊烯研究中的气相色谱分析方法。

In this paper, the gas chromatographic methods used in the research for selective hydrogenation of cyclopentadiene to produce polymer grade cyclopentene have been described.

16. 对这些破坏活性中心的反应所提出来的反应机理,可以用于解释丁二烯阴离子聚合中的自发终止现象。

Possibility reaction mechanism was proposed, which could be used to explain the spontaneous termination reaction in anionic polymerization of butadiene in the presence of polar additives.

17. 本工作首次制备了醇改性负载钛催化剂,并将其用于丁二烯和异戊二烯配位聚合。

Supported titanium catalysts modified by alcohols were prepared for the first time, and the modified catalysts were used for the coordination polymerization of butadiene and isoprene.

18. 用动态激光光散射法测定了丁二烯-苯乙烯乳液聚合的乳胶粒子的粒径及其分布。

The latex particles size and size distribution in emulsion copolymerization process of butadiene-styrene were determined by dynamic laser scattering.

19. 用负载钛催化剂在加氢汽油溶剂中引发丁二烯配位聚合。

The polymerization of isoprene with supported titanium catalyst modified by n-octanol was carried out.

20. 加入少量1,5 -己二烯能提高交联聚合物的抗剪切能力,同时也能提高交联聚合物的相对分子质量。

Addition of small amount of crosslinking agent 1, 5-hexadiene could increase shear stability and relative molecular mass of polymer.

21. 丁二烯一苯乙烯橡胶和加油丁二烯一苯乙烯。乳状聚合物型。试验配方和硫化特性的评定。

Styrene - butadiene rubbers and oil extended styrene butadiene. emulsion polymerised types. test recipe and evaluation of vulcanisation characteristics.

22. 二甲基二烯丙基氯化铵(DMDAAC)与丙烯酰胺(AM)的共聚物作为一种水溶性阳离子高分子聚合物广泛用于各种水处理。

The copolymer of dimethyldiallylammonium chloride (DMDAAC)with acrylamide(AM) as a water soluble cationic macromolecular polymer is widely used in water treatment.

23. 通过在稳定的自由基存在下进行1,3-二烯的控制的自由基聚合制备1,3-二烯的遥爪低聚物的方法。

Method for preparing telechelic 1,3-diene oligomers by the controlled free radical polymerization of 1,3-dienes in presence of a stable free radical.

24. 聚双环戊二烯是采用反应注射成型工艺合成的一种性能优良的新型工程材料,是通过开环易位机理形成的聚合物。

Polydicyclopentadiene (PDCPD) is a novel engineering material synthesized by reaction injection molding (RIM) method and such reaction mechanism is ring-opening metathesis polymerization.

25. 通过用选自聚乙酸乙烯酯、聚异戊二烯、或其共混物中的聚合物涂布垂直定向碳纳米管,从而形成复合材料膜。wWw.wENTIYI.cOM

The composite film is formed by coating perpendicularly-aligned carbon nanotubes with a polymer selected from poly (vinyl acetate), poly (isoprene), or blends thereof.

26. 通过用选自聚乙酸乙烯酯、聚异戊二烯、或其共混物中的聚合物涂布垂直定向碳纳米管,从而形成复合材料膜。

The composite film is formed by coating perpendicularly-aligned carbon nanotubes with a polymer selected from poly (vinyl acetate), poly (isoprene), or blends thereof.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!