转动臂用英语怎么说,转动臂的英文翻译


词语导航

基本信息

词语:转动臂

繁体:轉動臂

拼音:zhuǎn dòng bì

英语翻译

【机】 rotor arm

分词翻译

转动的英语翻译:

rotate; revolve; screw; turn; twirl; wheel
【化】 rotation
【医】 roll; rolling; rotation
【经】 rotate

臂的英语翻译:

arm
【医】 arm; brachia; brachio-; brachium; upper arm; upper limb

翻译例句

1. 作为移动单元(6)的转动臂(17)由两根连杆(19、20)和作为固定部件的固定板(21)构成。

A rotating arm 17 of the moving means 6 is composed of two link levers 19, 20 and a fixing plate 21 used as a fixing member.

2. 机器人臂绕枢轴转动并伸直,好像伸出它的机械手。

It pivots around and straightens as it extends its mechanical hand.

3. 旋动调节螺杆使转向臂向主电机反方向移动,继续转动调节螺杆直到动盘与定盘接触,发出轻微金属碰撞声为止。

Turn the adjustment screw so that the steering arm moves away from the main motor. Keep turning until you hear a metallic sound created when the discs come together.

4. 转动雨刷模组盖,并拆下将雨刷马达曲柄臂固定于雨刷马达输出轴上的螺帽。

Turn the wiper module over and remove the nut that secures the wiper motor crank arm to the wiper motor output shaft.

5. 鞋座可在支架和摆臂的带动下绕绑腿外壳转动,快速实现滑行与行走的转变。

Each shoe base can be driven by each support bracket and each swinging arm to rotate in the mode of winding each legging outer shell to rapidly realize sliding and walking conversion.

6. 转向器将方向盘的转动转变为转向臂的摆动及齿条的直线往复运动并通过(转向)机构增大转向控制力。

Diverter becomes steering wheel"s rotation steering arm"s swinging or the rack axis straight reciprocating motion, and to changes the control force to carry on the enlargement the organization.

7. 此外,增加前悬吊下控臂后衬套的刚性系数、阻尼系数与方向盘的转动惯量,均可有效减少因煞车抖振所导致的方向盘振动。wWw.weNTiYi.cOM

Moreover, increasing the stiffness and damping of lower control arm rear bushing and the steering column inertia can effectively reduce the shimmy caused by brake judder.

8. 专业制造汽车底盘部件和转角及转动部件,产品有:悬挂球头、拉杆球头、控制臂球头、转角拉杆球头、拉杆总成、主邦汰、副邦汰等系列。

Specially manufacture automotive Chassis fittings, Steering parts, Ball joint, Tie rod end, Side rod Assy, Rock and Stabilizer link, Control arm, Idler arm, Pitman arm, Center link cross rod.

9. 在抽屉打开前,操作者拉动臂来使上盒壳相对下盒壳转动。

Before the drawer is opened, an operator pulls an arm to rotate the upper cartridge shell relative to the lower cartridge shell.

10. 首先只要把假臂放到应放的位置,打开开关,它就能转动,搬拿任何你想要的东西。

Just put the "arm" in place, hit the switch and it curls around whatever you might want to carry.

11. 搬拦捶:手臂不可伸直,搬(压)拳和拦掌动作要有明显的弧度,不可直来直往,身体转动与两臂动作要配合恰当。

Step backwards. keep the body straight and at the same height. the hand pushing forward should be between the shoulder and the eyebrow.

12. 于是,与前轮相连的转向节臂使车轮在其轴线上左右转动。

The steering-knuckle ARM, attached to the front wheels, are therefore forced to swing the wheels to the right or left on their pivots.

13. 当延长构件向第二位置移动时,臂与延长构件附接并在安装表面枢轴转动。

An arm is affixed to the elongate member and pivotal at a mounting surface when the elongate member moves toward the second position.

14. 单马达驱动机械臂是一种轻重量和低转动惯量的机器人。

Single motor driven mechanical arm is a lightweight and low inertia robot, which reduces the number of motors.

15. 平行四边形转动关节、小臂一转动关节、大臂转动关节结构相同。

The structures of the parallelogram mechanism cradle head, forearm 1 cradle head and arm cradle head are the same.

16. 平行四边形转动关节、小臂一转动关节、大臂转动关节结构相同。

The structures of the parallelogram mechanism cradle head, forearm 1 cradle head and arm cradle head are the same.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!