道槽用英语怎么说,道槽的英文翻译


词语导航

基本信息

词语:道槽

繁体:道槽

拼音:dào cáo

英语翻译

【电】 channel slot

分词翻译

道的英语翻译:

path; road; doctrine; Tao; say; talk; way; method
【医】 canal; canales; canalis; meatus; passage; path; pathway; tract; tractus
viae

槽的英语翻译:

chamfer; gutter
【计】 slot
【化】 channel
【医】 alvei; alveus; crib; gutter; slot; socket; tank; trough

翻译例句

1. 部门种类的企鹅将卵产在土地上挖出的道槽中。

Some of the species lay eggs in tunnels dug in the ground.

2. 成形品是由流入融化树脂的浇口、导入模槽的流道与产品部份所构成。

Molded into the melted resin from the gate, into the flow channel module slot part of the composition of the product.

3. 为了找到一种理论最优的控制方案,本文以槽道湍流为例对壁湍流减阻的最优控制方案进行了相关研究。

To find an optimal control strategy in theory, the optimal control in turbulent channel flow has been studied by direct numerical simulations in present paper.

4. 其中热管吸液芯分别采用普通不锈钢丝和反向槽道毛细结构,分析其工作性能。

The performance of the wick is analyzed with two wicks which is normal wire-mesh screen and reversed groovy capillary structure.

5. 为实现最优控制的槽道湍流直接数值模拟奠定了重要基础。

Present study provides a necessary platform to realize the optimal control of turbulent channel flow by direct numerical simulations.

6. 探讨了轴向槽道热管垂直安装时热源位置的不同对热管工作特性的影响。

The effect of heat source location on the heat transfer of an axially grooved heat pipe was investigated.

7. 作者经过计算和分析,说明压气机叶栅流中主要的相互作用形式是叶栅槽道中激波和湍流附面层的相互作用。

It is shown by calculation and analysis that the main form of the interaction in compressor cascades is the interaction between shock wave and turbulent boundary layer in channels.

8. 对不可压缩边界层或平面槽道流,还会出现典型的三维结构。

For incompressible boundary layer or plane channel flow, typical three-dimensional structures would appear.

9. 针对单道超声反射式水泥胶结测井,从理论方法上研究如何从一维反射资料反演第一界面窜槽时水层的厚度。

Thickness reversion method of water layer from one dimension reflective data in ultrasonic reflective cement bond logging is theoretically studied when the first interface is bad bonded.

10. 利用微弧氧化技术对ZL 108铝合金活塞第一道环槽进行了陶瓷化处理。

The ceramic treatment for the first ring groove of ZL108aluminum alloy piston was conducted with micro-arc oxidation technique.

11. 本文将这种方法应用于力锁合凸轮和槽道凸轮。

This method has been applied to force sealed and groove sealed CAM mechanism.

12. 较系统地论证了我国首制高性能双体滑行艇的主尺度选择与线型设计,列出了槽道参数确定及设计与演变中应考虑的因素。

This paper demonstrates the selection of main dimensions, design of hull lines and determination of channel parameters for a high-speed twin-hulled planing boat, which is first built in China.

13. 那是个巨大的方形木制建筑物,企口接缝的墙壁涂成淡绿色和白色,一道科林斯式的圆柱门廊,窗与窗之间是刻有四槽的半露柱。

It was a large square wooden structure, with tongued and grooved walls painted pale green and white, a Corinthian portico, and fluted pilasters between the Windows.

14. 考察了催化剂涂层的配比、反应温度、水醇比、进料速度、反应时间对甲醇重整微槽道反应器性能的影响。

The effects of catalyst composition, reaction temperature, space velocity, molar ratio of methanol to water, and reaction time on the performance of the microchannel reactor were investigated.

15. 本文对空气和水流过烧结青铜颗粒水平多孔槽道表面上的对流换热进行了实验研究。

Forced convection heat transfer of water and air in plate channels filled with sintered spherical particles was investigated experimentally.

16. 泄洪道,分洪道,溢流槽天然或人造的泄洪渠或泄洪管道,以引导洪水绕过或远离城市中心或人口稠密地区。

Floodway; high-flow diversion Natural or man-made bypass channels or conduits that redirect flood waters around or away from urban centers or area of high population density.

17. 对三种微槽平板热管的传热性能进行了实验研究,分析了充液率、工质的种类、槽道形状对微槽平板热管传热性能的影响。

The performance of three kinds of flat miniature heat pipes is studied experimentally and the factor such as the charging ratio, working fluid and groove structure are analyzed.

18. 采用偏心侧浇道浇注系统,在金属液的末端均匀开设集渣包及排气槽。

Slag strap and exhaust slot are designed in the end part of molten metal, and off-centering runner can be used.

19. 水在微尺度槽道中单相流动和换热的研究,是通过对其流动阻力和换热强度等的实验进行的。

Experiments to investigate the heat transfer and fluid dynamic characteristics of water flowing through micro channels were conducted.

20. 数值模拟了槽道进气角和转折角对开槽叶栅流场特性的影响。

The effect of slot inlet Angle and turning Angle on flow field characteristic of cascade with slot was studied numerically.

21. 第一道环槽的天地间隙超过了请求。

The gap in the top ring groove had exceeded the requirement.

22. 同时,本实验还对不同高度和不同扩张方式的槽道分别进行研究。wwW.weNTiYi.com

What"s more, channels with different height and expand Angle are also studied.

23. 文中重点论述液氧在垂直板翅槽道中两相流压力降及传热的计算模型与程序。

The paper primarily deals with the calculating models and the programmes of two-phase pressure drop and heat transfer of Lox in vertical plate-fin channels.

24. 对新型高剪切均质机关键部分定转子间隙区、定子槽道区、转子槽道区的内部流场进行了理论分析。

Last, the flow fields of the key parts of the new-type high-shearing homogenizer, the clearance between stator and rotor, the troughs of stator and the troughs of rotor, were analyzed in theory.

25. 最后用方截面管流中有关二次流的实验结果对模型进行鉴定。 结果表明,给出的模型在槽道流动和方截面管流中都获得了满意的结果。

Then the normal Reynolds stresses in square duct flow are calculated using the new model and coefficient functions, the results are consistent with the experimental data.

26. 对高热流密度芯片的冷却要求进行了分析,采用有限元方法对微槽道冷却热沉的传热性能进行了数值模拟。

The finite element method is then used to numerically simulate the heat transfer performance of microchannels cooling heat sink.

27. 那是个巨大的方形木制建筑物,企口接缝的墙壁涂成淡绿色和白色,一道科林斯式的圆柱门廊,窗与窗之间是刻有四槽的半露柱。

It was a large square wooden structure, with tongued and grooved walls painted palegreen and white, a Corinthian portico, and flutedpilasters between the windows.

28. 那是个巨大的方形木制建筑物,企口接缝的墙壁涂成淡绿色和白色,一道科林斯式的圆柱门廊,窗与窗之间是刻有四槽的半露柱。

It was a large square wooden structure, with tongued and grooved walls painted palegreen and white, a Corinthian portico, and flutedpilasters between the windows.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!