发动复合用英语怎么说,发动复合的英文翻译


词语导航

基本信息

词语:发动复合

繁体:發動復合

拼音:fā dòng fù hé

英语翻译

【电】 launch complex

分词翻译

发动的英语翻译:

launch; start; bring into play; levy; spark
【电】 lunching

复合的英语翻译:

complex; composite; compound
【化】 recombination
【医】 combination; recombination
【经】 compound

翻译例句

1. 但是看着在空气动力学、复合结构以及发动机技术上投入的大量研发,很容易让人忘记轮胎仍然是决定赛车性能最重要的因素。

But considering the development effort invested in aerodynamics, composite construction and engines it is easy to forget that tyres are still a race car"s biggest single performance variable.

2. 采用ANSYS软件对脉冲发动机复合壳体进行了优化设计研究。

Optimum design of the composite shell of pulse motor has been presented using ANSYS soft ware.

3. 本文探讨了以双燃料发动机为代表的预混合和扩散燃烧共存的复合燃烧模式。

This thesis describes a compound combustion mode in the dual fuel engines that combines both premix and diffusion combustion.

4. 复合材料发动机机体的横向振动是比较严重,需要采取措施改善横向振动特性。

The transverse vibration of composite engine block was so serious that it was necessary to take measures to improve this defect.

5. 对某航空发动机复合材料外涵道机匣构件进行了结构有限元建模与线性屈曲特性的有限元分析。

The structural finite element modelling and the finite element analysis of linear buckling characteristics of the composite by pass duct case of aeroengine are carried out.

6. 使用该复合添加剂还能够有效地提高发动机的动力性能,延长发动机的服役寿命。

The said additive could also improve the dynamic performance of the engine and prolonged the service life.

7. 介绍了固体火箭发动机壳体裙的结构、用途及采用复合材料裙体的优点。

Both the structure and the use of solid rocket motor case skirts are presented. The advantages of the composite skirts are introduced.

8. 陶瓷梯度增强铝基复合材料是大功率发动机活塞理想增强材料。

Gradient Aluminum matrix composite reinforced by ceramic fibers is an ideal reinforcement material for powerful engine pistons.

9. 本文对某固液混合发动机复合结构喷管进行了流动与传热数值模拟,并与试验结果进行了对比分析。

The paper presents a digital simulation analysis result of flow and heat transfer of a compound structure nozzle of hybrid motor, and also presents their comparison with experiments.

10. 中国从1958年开始复合固体推进剂火箭发动机的探索和研制工作。

China has undertaken to research and develop composite solid propellant rocket motors since 1958.

11. VARTM工艺成型的固体火箭发动机壳体复合材料连接裙段构件纤维体积含量较低,复合材料力学性能不佳。

The composite skirts for solid rocket motor shells fabricated by VARTM (VacuumAssisted Resin Transfer Molding) had poor mechanical properties because the fiber volume fraction was very small.

12. 研究缠绕复合材料发动机壳体在内压载荷作用下,承受强度约束的优化设计方法。

Design optimization algorithm of winding composite motor cases under inner pressure and endure strength restrain is studied.

13. 针对具有侧向脉冲推力和气动力复合控制的动能拦截弹,需要解决姿控发动机的组合点火问题。

To the kinetic interceptor with lateral impulse thrust and aerodynamic force, it is required to solve the problem of combined fire of motors for attitude control.

14. 超声珩磨与珩研复合加工技术是近来对发动机缸套等重要零件表面纹理特性研究的热点。

Ultrasonic honing and lapping complex machining technology is the hot topic of the surface texture characteristics of important parts such as engine cylinder sleeves.

15. 同时采用小扰动法推导了俯仰通道和滚动通道的简化模型,为空气动力和姿控发动机推力复合控制系统进行初步设计提供了依据。

What′s more, according to the method of little disturbance, the simplified model of pitching and rolling plane is derived, so preliminarily combined control system can be designed.

16. 研究验证了复合材料制造发动机机体的可行性,并为复合材料发动机机体的结构设计提供了依据。

This research proves that engine block made by composite material is feasible, and also provides ground for constructional design of engine block made of composite material.

17. 以摩托车发动机箱体及箱盖的加工自动线刀具为例,指出加工铝合金时刀具材料和几何角度应注意的问题,另外对小孔加工复合刀具进行详细的说明。

This paper explains the character of tool materials, tool geometry and small combined boring tools for machining aluminum alloy on the basis of the practice and research.

18. 最常见的复合型汽车指的是将内燃发动机和一个或一个以上电机结合起来的汽车。

Most commonly, the term refers to vehicles that combine an internal combustion engine and one or more electric motors.

19. 直径300毫米的固体推进剂火箭发动机采用了复合推进剂端燃药柱。

The 300mm diameter solid propellant rocket motor employs a composite propellant end burning grain.

20. 隔热毯可防止火焰和发动机运行产生的热量对风扇函道内夹芯组件复合材料的损害。

The thermal insulation prevents fire and engine operation heat damage to the composite inner wall of the fan duct cowl.

21. 采用三维有限元对复合材料发动机机体的应力场进行了数值计算。

Numerical calculation of stress field of engine block made of composite material is carried out by means of three dimensional finite element method.

22. 对复合材料壳体的固体发动机药柱在工作内压作用下的变形和三维应力、应变进行了计算。

Under operation pressure, the 3 D deformation strain and stress of SRM grain with composite case is calculated.

23. 直升机配装先进的涡轴发动机、大功率传输能力的传动系统、球柔性复合材料旋翼系统以及综合化航电系统。wwW.WentiYi.coM

It is equipped with advanced turbo-shafts, a high-power drive system, a ball-bearing composite rotor system, and an integrated avionics system.

24. 依据德国大众汽车公司汽车发动机复合橡胶燃油软管标准,研制了CA488发动机燃油管。

Fuel tube for the CA488 gasoline engine has been developed according to the norm of Volks Wagon Automotive Company, Germany for flexible fuel hose made of composite rubber.

25. 高速旋转试验台是模拟底排一火箭复合增程炮弹内的固体火箭发动机实验设计的。

The estimation of extend-range solid rocket motor in high speed rotation is a key technique.

26. 本实用新型涉及一种轻型卡车复合前翼板,解决了现有轻型载货汽车 前翼板消除发动机噪声效果很差的问题。

The utility model relates to a combined front wing for a light-duty truck, solving the problem that existing front wing for a light-duty truck is poor in effect to eliminate the noise of the engine.

27. 本实用新型涉及一种轻型卡车复合前翼板,解决了现有轻型载货汽车 前翼板消除发动机噪声效果很差的问题。

The utility model relates to a combined front wing for a light-duty truck, solving the problem that existing front wing for a light-duty truck is poor in effect to eliminate the noise of the engine.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!