预模型用英语怎么说,预模型的英文翻译


词语导航

基本信息

词语:预模型

繁体:預模型

拼音:yù mó xíng

英语翻译

【计】 prescheme

分词翻译

预的英语翻译:

beforehand; in advance
【医】 fore-

模型的英语翻译:

former; matrix; model; mould; pattern
【计】 Cook-Torrance model; GT model GT; MOD; model; mosel
【医】 cast; model; mold; mould; pattern; phantom
【经】 matrices; matrix; model; pattern

翻译例句

1. 数据库可以包含物化查询表(MQT),即用于 DWEOLAP模型和多维数据集的预联结和预聚合的表。

The database may contain materialized query tables (MQTs), the pre-joined and pre-aggregated tables for DWE OLAP models and cubes.

2. 文本IDoc的两种形式的预构建模型已在工具包中提供。WWw.wEnTIyI.cOM

Pre-built models for both forms of text IDoc are supplied in the toolkit.

3. 凭借局部集合装载、模型使用分析和适应性预取(adaptive prefetching)等特性,这些功能得到进一步的加强。”Stepper说。

The characteristics have been further improved through features like partial collection loading, model usage analysis and adaptive prefetching," Stepper said.

4. 目的采用家兔心肌缺血再灌注损伤动物模型,观察缺血预适应对心肌缺血再灌注损伤的心肌保护作用。

Objective To observe the protective effect of ischemic preadaptation on myocardium injury of ischemia reperfusion by adopting the animal model of ischemia reperfusion on myocardium injury rabbits.

5. 通过实例计算表明,该模型具有良好的适用性和预性精度。

Actual computing examples show this model has good applicability and forecast precision.

6. 文章给出了横向预瞄偏差的概念,提出了一种基于横向预瞄偏差的驾驶员前视轨迹控制模型。

In this paper, the concept of preview course lateral deviation was given and a corresponding driver control model was set up.

7. 本文讨论了在预复合反应的“一、二、无穷大”模型中有限核大小效应的影响。

The influence of limited nuclear size effect to "One, two, infinity" model for precompound reactions is discussed.

8. 计算结果显示,不同细观骨料模型具有相似的规律,即随预静载增大,混凝土动弯拉强度上升,至一定峰值后回归到静载强度。

The law shows that, along with the static pre-load increasing, the dynamical bending strength of concrete would go up to a peak value and then move downward to the static strength.

9. 为了在预模拟结束的时候达到准静态平衡状态,需要足够的系统阻尼(见理论手册,气囊模型章节)。

For obtaining a quasi-static equilibrium state at the end of the pre-simulation, the incorporation of sufficient system damping is a necessity (see Theory manual, chapter Airbag models).

10. 该模型充分利用图像中每一个像素的预判断知识,设计COW工作站机群以结合实现并行算法。

This model made full use of the pre-judgment knowledge in the image, and designed a workstation of COW cluster to achieve the parallel algorithms.

11. 介绍了数控式对接机构对接的基本操作过程,建立了对接预捕获阶段仿真的数学模型,并给出了仿真实例。

In this paper, basic operating process of numerical control docking mechanism is introduced. Mathematical model in initial capture period is established and simulation example is given.

12. 在预调度建模期间使用机会约束把不确定因素包含到模型中,在满足一定稳定度的前提下,寻求最优调度方案;

Uncertain information was added to the pre-scheduling model as chance constraints before optimal scheduling result that was researched with scheduling stability above some level was attained.

13. 目的探索建立无血预充兔体外循环模型的方法。

Objective To establish a rabbit model of the cardiopulmonary bypass (CPB) flushed without blood.

14. 主要介绍了合理预抽期确定模型在焦作矿区的应用。

Application of confirmation model for reasonable pre-draining time is introduced in this paper.

15. 在此基础上,应用预瞄跟随理论提出了描述驾驶员在给定目标车速前提下对汽车行驶速度进行控制的模型。

Then based on preview follower theory, a driver velocity control model that describes how the driver follows and controls vehicle velocity under the precondition of the given target vel.

16. 利用常用办公软件设计了应用模板,建立了预焙槽阳极更换顺序的产生及优选模型,并使用该模板排出了合理的换极顺序。

The paper sets up optimized model for anode exchange sequence of pre-baked anode cell by means of application template designed with usual office software.

17. 根据傅里叶传热定律和基尔霍夫导电定律,建立了预焙阳极铝电解槽阳极传热、导电的数学模型。

According to Fourier"s law and Kirchhoff"s law, a mathematical model of prebaked anode current and temperature fields of aluminum reduction cell was built.

18. 系统论述了预信号控制的部分锯齿形BRT优先进口道的设置方法和计算模型;

The setting methods and models for pre-signal controlled partial indented BRT pre-empty approach are presented.

19. 有血预充、减少总预充量和维持足够的转流流量是建立大鼠体外循环模型的关键。

Blood priming, total priming reduction and enough bypass flow were the key points in establishing the CPB model in rats.

20. 方法采用实验性家兔缺血再灌注及缺血预适应模型,随机分成7组,每组8只。

Method By using experimental rabbits IR (Ischemia Referpusion) and IP (Ischemia Preadaptation) model, we freely divide rabbits into 7 groups (8 rabbits every group).

21. 为了研究静力预加载荷对诸如柱、圆柱壳等结构动态稳定性的影响,采用了一种简单的缺陷敏感弹塑性模型。

In order to study how the static preloading affects on the buckling stability of columns or cylindrical shells, a simple imperfection-sensitive elastic-plastic model is used.

22. 根据预腐蚀件的拉伸实验结果,对模型的正确性进行验证。

The model was developed in the framework of micro-mechanics, in combination with the existing corroded coupon tensile test results.

23. 为研究预弯工艺对后续成形的影响,本文建立了预弯成形模拟模型;

The thesis establishes a pre-bending forming simulation model to study the influence of pre-bending process on the continuous forming.

24. 针对一种使用了离散非线性采样的视觉注意机制模型,对其应用在小目标预检测上的检测概率进行了研究和分析。

A visual attention mechanism model for discrete nonlinear sampling is studied to analyze its detection probability during pre-detecting small targets.

25. 因果关系的默认规则表达为潜在的因果关系提供了一个简洁的语法与语义形式化工具,使得因果关系能够应用在因果推理模型中,比如预浙江大学博士学位论文。

The default rule representation provides a concise syntactic and semantic formalism for potential causal relations to be used in causal reasoning models such as predicting, explaining and diagnosing.

26. 本文提出了光面爆破和预裂爆破的断裂力学模型,分析了应力波、爆生气体准静态压力在爆破破裂过程中的作用。

This paper presents a fracture mechanics model of smooth blasting and pre-split blasting, analyzes the function of stress waves and quasi-static pressure of explosion in blasting process.

27. 从车辆的转向动力学和预瞄运动学特性出发,结合转向系统的系统辨识,建立了车辆转向系统的线性模型。

This paper establishes a linear model for vehicle steering system based on vehicle steering dynamics and per-view kinematics, combined with system identification of steering system.

28. 基于不变形预张力的基本概念,建立了斜拉桥成桥状态的多目标、多约束的优化模型,并通过有限元程序求解成桥索力。

Based on the basic concept of the un-deformed pretension of cable, the optimization model of finished state with multi-objective and multi-constraint is used.

29. 基于不变形预张力的基本概念,建立了斜拉桥成桥状态的多目标、多约束的优化模型,并通过有限元程序求解成桥索力。

Based on the basic concept of the un-deformed pretension of cable, the optimization model of finished state with multi-objective and multi-constraint is used.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!