
词语导航
基本信息
词语:边缘误差
繁体:邊緣誤差
拼音:biān yuán wù chà
英语翻译
【计】 marginal error
分词翻译
边缘的英语翻译:
edge; margin; verge; brim; brink; fringe; hem; skirt
【化】 skirt
【医】 acies; edge
误差的英语翻译:
error
【计】 booboo; E; errors
【化】 deviation; error
【医】 error
【经】 error
翻译例句
1. 通过加窗技术,有效地抑制和减小了边缘误差。
By the window technique, the edge error was restrained or reduced.
2. 刀口法是测量光学系统的传递函数一种基本方法,通过对刀口边缘误差建立数学模型,讨论刀口误差对光学传递函数测量精度的影响。wWW.WeNtIYi.CoM
Using a knife edge to measure the MTF of optical system is a basic way. The paper discusses the influence of slit edge error on MTF by building a mathematical model.
3. 对刀口边缘误差进行了定量分析,得出在一定精度范围内测量光强的区域,定性分析了使用拟合法求MTF优于使用均值法求MTF。
The quantitative analysis result shows that it can reach the given precision by only measuring limited area. It also shows that fitting-curve-method is better than averaging method for precision.
4. 面形检测采用边缘定位的方法,并且结合了曲线拟合的方法求解一维位移场来计算误差。
It USES edge localization and curve fitting to solve one dimension displacement field and calculate the error.
5. 同时,还分析研究了量化精度对图像边缘的移位影响,给出了移位误差。
Meanwhile, effect of quantization to edge excursion is analyzed and studied and the error of excursion is given.
6. 针对相关跟踪实时性差和误差累积问题,提出了基于边缘检测的自适应相关算法。
This paper describes adaptive correlation tracking based on edge detection to overcome the time-consuming and cumulated errors in correlation tracking.
7. 仪表质量检测的关键技术是提取边缘和定义指示误差。
The key issue to the gauge panel quality inspection is to detect the image the and define the pointing errors.
8. 如果试冲零件边缘线有误差,可反复采用这种方法优化修边线。
If the edge line of the stamped part still has dimensional problem, this method can be used repeatedly to optimize the trimming line.
9. 一般采用缺陷边缘或缺陷形状中心作为匹配点进行视差计算,实验表明此类方法具有很大误差。
The edge or shape center of the defect is often adopted as matching points. But experimental results show that the methods can bring great errors.
10. 除了评估剂量递增的价值之外,必须评估与成像误差次数一起的“边缘”缺失。
In addition to evaluating the value of dose escalation, "marginal" miss must be assessed, along with the frequency of imaging errors.
11. 结果:抑菌圈边缘清晰,测定结果误差较小。
Results: The edge of bacterial inhibition ring is clear, and the errors of test results are smaller.
12. 误差的大小是试样厚度、边缘宽度、杯口面积、可能还包括水蒸气透过量的综合影响。
The magnitude of the error is a complex function of the thickness, ledge width, mouth area, and possibly the permeability.
13. 提出空间均衡方法用来消除由天线的机械加工误差和阵面的边缘绕射引起阵元间的幅相误差。
The space equalization method (SEM) is put forward in this paper to eliminate the amplitude and phase errors among antennas caused by mechanical manufacturing errors and array edge effects.
14. 结论是:边缘探测技术具有高信噪比,很小的测量误差,较大的高精度测量范围,并对背景噪声有一定的抵抗作用。
The final conclusion is: edge technique has high signal to noise ratio, small statistical errors, large measuring range in high accuracy, and can prevent back ground noise in some way.
15. SLIM相对旋转异步电机(RIM)存在气隙大、边缘效应等,若采用RIM开路和短路试验方法,会给参数测量带来较大误差。
The SLIM parameters have clear errors to the real values on the base of the RIM parameter measurement method because there are larger air gap and edge effect.
16. 采用边缘探测技术测量布里渊频移量的误差会对海表温度测量精度带来很大影响。
The error of measuring Brillouin frequency shift based on brim detecting technology has great influence on the measurement precision of sea surface temperature.
17. 采用边缘探测技术测量布里渊频移量的误差会对海表温度测量精度带来很大影响。
The Brillouin lidar system for remote sensing of the ocean based on the edge technique is accurate.
18. 当试样面积大于杯口面积时,试样在透湿杯边缘的覆盖就成为一个误差来源,尤其是对于较厚的试样。
When the specimen area is larger than the mouth area, this overlay upon the ledge is a source of error, particularly for thick specimens.
19. 构建了基于计算机视觉的齿形链链板的测量系统,对直线和圆的边缘定位,提出了新的亚像素算法,计算了齿形链链板的销孔直径及圆度误差、链板节距和两直边夹角,对测量结果进行了误差分析。
The measurement system on chain board of tooth shape chain was established based on computer vision, and a new kind of sub-pixel algorithm for edge orientation of beeline and circle was put forward.
20. 产生这种误差的原因主要是由小孔边缘发生塑性变形、超出弹性范围所致。采用了一种改进方法对焊接残余应力重新测试,使误差大为减小。
The errors are mainly produced by the plastic deformation around the drilled hole, which may be reduced by the method introduced in this paper.
21. 为了解决这一问题,提出了一种新的基于误差修正的自适应边缘保持插值算法。
To solve these problems, a new algorithm for image interpolation based on error correction was proposed. Firstly, map the original image to the interpolation image.
22. 为了解决这一问题,提出了一种新的基于误差修正的自适应边缘保持插值算法。
To solve these problems, a new algorithm for image interpolation based on error correction was proposed. Firstly, map the original image to the interpolation image.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
