
词语导航
基本信息
词语:磨除
繁体:磨除
拼音:mó chú
英语翻译
【医】 abrade
分词翻译
磨的英语翻译:
abrade; burnish; grind; mill; milling; strop; whet
【医】 grinding; mill
除的英语翻译:
divide; except; get rid of; remove
【计】 divide
【医】 de-; des-; Div.; divi-divi; e-; ex-
翻译例句
1. 结果:寰枕关节面不同的比例关系,决定枕髁的磨除范围。
Results: Different ratio relations to atlantooccipital joint interfaces were decided for condylar extension drilled.
2. 这些测量结果与用传统的恒磨除率磨削试验具有良好的相关性。
These measurements have correlated well with those made in conventional constant material removal rate grinding tests.
3. 目的探讨改良部分迷路切除岩骨尖入路(PLPA)的岩骨磨除技术。
Objective to probe abrasion technique of the petrous bone via modified partial labyrinthectomy petrous apicectomy (PLPA) approach.
4. 目的探讨经口咽入路齿状突磨除行脑干腹侧减压的手术技巧及安全性。
Objective To study the microsurgical odontoidectomy via transoral transpharyngeal approach for craniovertebral junction malformation and its safety.
5. 本文研究了三种磨削液对磨削力、金属磨除率、表面粗糙度和烧伤程度的影响。
The Influence of three grinding fluids on grinding force, metal material removal rate, surface roughness of ground workpiece, and the extent of grinding bum were investigated in this paper.
6. 对于中、大型枕髁病人,磨除枕髁后可提供更大的观察视角,因此宜采用远外侧经髁入路。
For those with middle and big condylar, partial resection of condylar will offer a wider exposing angle, thus the far lateral transcondylar approach seems necessary.
7. 本文通过大量的试验,系统研究了磨削工艺参数对聚晶金刚石(PCD)磨除率q、磨削比g的影响。
Their influence to removal rate (Q) and abrasion ratio (g) of PCD material is usually measured by range and variance analysis method.
8. 本文的研究结果表明,双端面磨削可以在很短的加工时间内获得极高的表面光洁度、高的精度和高的磨除率。
Preliminary results presented in this report showed that double side grinding produces very good surface finish, a high precision, and high material, removal rates, in short processing.
9. 结论 经口咽入路齿状突和斜坡下端磨除行脑干腹侧减压是一种安全、有效的治疗颅颈交界区畸形的手术选择。
Conclusion Transoral technique is a viable and useful option in the treatment of irreducible ventral craniocervical junction bony compression.
10. 目的观察磨除单侧后牙造成偏侧咀嚼的大鼠颞颌关节内P物质(SP)的表达情况,进一步探讨颞颌关节病的发病机制。
Objective To study the expressions of substance P(SP) in rats with unilateral chew, and to discuss the mechanism of temporomandibular disorders.
11. 手术时通过磨除前床突、鞍结节,切开镰状襞等能松解视神经、颈内动脉,形成较宽敞的操作空间,良好的控制近端动脉。
The resection of the anterior clinoid process, the tuberculum and the falciform ligament can offer a roomy space to work and control the proximal artery;
12. 本文主要论述日用陶瓷釉料的制备工艺要做到精和细,特别是釉用主要原料在球磨前经过水洗除铁,可以明显改善釉面质量。
This paper discusses the preparation of daily ceramics glaze; Especially, the main glaze materials treated through water washing and deironing can remarkably improve the quality of glaze surface.
13. 其游隙除工作游隙外,尚需考虑转移膜及其滞留松散磨屑所需之游隙。wWw.WeNtiyi.Com
However, the clearance for transfer film and the remainder of loose wear debris should be considered I...
14. 其游隙除工作游隙外,尚需考虑转移膜及其滞留松散磨屑所需之游隙。
However, the clearance for transfer film and the remainder of loose wear debris shou...
15. 其游隙除工作游隙外,尚需考虑转移膜及其滞留松散磨屑所需之游隙。
However, the clearance for transfer film and the remainder of loose wear debris shou...
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
