
词语导航
基本信息
词语:基础齿
繁体:基礎齒
拼音:jī chǔ chǐ
英语翻译
【机】 basic rack
分词翻译
基础的英语翻译:
base; foundation; elements; radical; root; substructure
【医】 foundation; fundament; ground
【经】 foundation; ground work
齿的英语翻译:
tooth; tine
【医】 dens; dent-; dentes; denti-; dento-; odont-; odonto-
翻译例句
1. 本文提出了一种以网络结点为基础,在齿面上的活动标架里,计算齿轮在不同啮合位置的接触点,以求得接触迹线的新方法。
This paper proposed a new method that was based on network node and applied to compute tooth contract-point line of engaged gears for different mesh position.
2. 为了改进PD C钻头设计,在全尺寸试验的基础上,对PD C钻头单齿切削过程进行了试验研究。
The single tooth cutting course of a PDC drilling bit is studied. The research is of great significance for improving PDC drilling bit design.
3. 从材料力学及流体力学角度探讨了弹性齿汽封设计的依据及其存在的理论基础。
From the aspects of material mechanics and fluid mechanics, discusses the design reason of elastic toothed belt vapour seal and its theory foundation.WWw.WENtIyi.COm
4. 通过对本区锐齿栎林群落的野外调查,报道了组成该群落的植物种类183种,隶属于60科,131属,并在此基础上对该群落区系特点作了较为详细的分析。
Investigation showed that there were 60 families, 131 genera and 183 species in the community flora. Based on the datum, the nature of the community flora was analyzed.
5. 在假设采煤机截齿为单自由度振动刚体的基础上,建立了采煤机截齿的动力学模型。
On the basis of the assumption that shearer pick is the single free degree vibration rigid body, the kinetic model of pick shearer is built.
6. 在此基础上建立了求取齿轮副传动误差和齿面接触点的数学模型,提出了分析齿轮传动误差和接触区域的仿真算法,并编制了相应的计算程序。
On the basis of it, the mathematical models of driving error and contact point are set up, then the emulation algorithm is put forward and the program is worked out.
7. 在此基础上,讨论了机构参数对齿环滑块的速度和加速度、系杆的角速度和角加速度的影响。
And based on this condition, there is a discussion on the effect to the slider"s velocity, acceleration, and rod"s angular velocity and angular acceleration caused by mechanism parameters.
8. 本文在分析和讨论了现有的外平动三环减速机结构的基础上,提出了一种新的内平动少齿差行星减速机的结构方案。
On the basis of analyzing and discussing the structural theory of Three-Ring gear reducer, this dissertation gave a new scheme of planetary gear reducer with few teeth difference.
9. 在分析行星轮与内齿环各段啮合情况的基础上,建立了行星齿环换向机构中系杆的角速度和角加速度计算模型。
Based on the meshing analysis of planetary gear and inner gear-ring, the angular velocity and angular acceleration calculation model of the rod is established.
10. 本文在先期研究的基础上对行星齿环式无游梁抽油机进行了更加深入的研究。
In this thesis, the author performed further study on the non-beam pumping unit of planetary gear-ring type based on the previous study.
11. 在单齿铣刀试验的基础上,本文提出了一个端面铣削力模型。
This paper presents a model for predicting cutting forces in face milling based on a single tooth cutter test.
12. 在此基础上设计了汽车同步器齿套摆线加工数控机床的总体结构;
On the basis of these, the general structure of the NC machine tool for synchromesh sleeves is designed with principle of hypocycloidal machining.
13. 在对齿轮参数进行数学分析的基础上,通过改变数控回转台的旋转角度,实现了用砂轮的一个端面去磨削齿轮的齿面。
Based on analyzing the gear parameters, the grinding of the gear face with an end face of the grinding wheel was realized by changing the rotating Angle of rotating table.
14. 在分析加工颤振机理的基础上,对加工齿轮泵壳体齿圈槽专用刀具的刀体结构和刀具参数进行了优化设计。
Based on the analysis of cutting chatter, the cutter body structure and parameters of special cutter for machining gear pump bodies are optimum designed.
15. 该系统可对齿轮每齿高的测量数据进行采集、存储、处理、并绘制成图,为最终实现齿轮精度测试的自动化奠定了基础。
This system can acquire, store, process and plot for measured data of gear"s each tooth which lays the foundation for the realization of automation in gear accurate test.
16. 在研究滚刀加工不同齿数带轮所形成的误差分布规律及误差对带与轮啮合传动影响的基础上,确定了滚刀可加工的齿数范围与参数。
At the basis of distribution law of error formed by the processed pulley with various teeth and its effect on transmission, the scope of tooth of pulley processed is defined.
17. 该设计方法可在较短时间内找到较多的齿数设计方案,为进行多方案比较和优化设计打下了基础。
A lot of determination schemes of the number of gear teeth can be obtained quickly with this method so that a basis for schemes comparison and optimum design is established.
18. 本文在第一次包络的基础上,着重进行了二次包络齿面接触分析,推导出了蜗杆和蜗轮齿面方程。
On the basis of the first envelope, the paper stresses on the tooth contact analysis of the second envelope, and the equations of a worm and a wormwheel flanks are derived.
19. 本文在分析齿轮泵的流量脉动和压力脉动的基础上,设计出一种错齿齿轮泵。
The interlaced gear pump is designed on the basis of analysing flow and pressure pulses.
20. 三环式齿轮减速器是在普通少齿差行星减速器基础上开发的一种新型传动装置,应用前景广泛。
Three-ring reducer is a new transmission device which develops in the foundation of few tooth difference planet reducer, its application prospect is wide.
21. 在原有螺杆式、卷扬式和液压式启闭机的基础上,设计研制了齿销式启闭机。
On the basis of original screw type, winding type and hydraulic type Headstock, a kind of dentate annul headstock is designed and manufactured.
22. 本文中的新型内三环减速器是在渐开线少齿差行星传动的基础上开发的一种新型传动装置。
The three-ring internal gear reducer(TRIGR) in this article is a new type transmission which have been developed on the basis of involute few teeth difference (FTD) planetary transmission.
23. 在前期理论研究的基础上,本课题着重研究超声辅助珩齿加工理论及加工实验。
The paper will selective study the theoretical analysis and experimental research of ultrasonic assisted gear honing machining based on previous theoretical study.
24. 在此基础上以楔形齿为对象研究了偏心单牙轮钻头井底破岩轨迹的形成,并编制了井底轨迹图仿真软件以模拟牙齿的凿岩轨迹。
The formation of the bottom hole rock-disintegrating track of the mono-cone bit with wedge teeth was studied, and simulation software for the track pattern was developed.
25. 在应用无差动法滚切斜齿圆柱齿轮的基础上,通过理论推导和实验验证,得出进一步减少斜齿轮齿向误差的可行的挂轮选配新方法。
Through theoretical derivation and experimental verification, a new method is obtained for further reducing tooth curve error of oblique gear and for choosing feed gear wheel.
26. 在讨论了碳纳米管的几何结构的基础上,对齿型和椅型碳纳米管的对称性进行了分析并将这些对称元进行了抽象和总结。
The geometric structure of carbon nanotubes (CNTs) is introduced, the symmetry of zigzag and armchair CNTs is analyzed and these symmetry elements are abstracted and summarized.
27. 在分析行星轮与内齿环各段啮合情况的基础上,建立了行星齿环换向机构中齿环滑块的速度和加速度计算模型。
Based on the meshing analysis of planetary gear and inner gear-ring, the velocity and acceleration calculation model of the slider is established.
28. 在分析国内外现有网架(壳)节点的基础上,提出了一种新型单槽齿承插式节点。
A new kind of grid shell node named single trough node is discussed in this paper.
29. 在应用边界元方法计算直齿圆柱齿轮的本体温度场的基础上,进一步研究了直齿轮在齿厚方向和沿其轴向由其本体温度的改变和传动载荷而引起的热弹性变形。
On the basis of this result further study is made on thermal elastic deformation resulted from bulk temperatures changing and transmission load of the spurs gear in the direction of tooth and axle.
30. 在应用边界元方法计算直齿圆柱齿轮的本体温度场的基础上,进一步研究了直齿轮在齿厚方向和沿其轴向由其本体温度的改变和传动载荷而引起的热弹性变形。
On the basis of this result further study is made on thermal elastic deformation resulted from bulk temperatures changing and transmission load of the spurs gear in the direction of tooth and axle.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
