
词语导航
基本信息
词语:射频放大
繁体:射頻放大
拼音:shè pín fàng dà
英语翻译
【电】 radio-frequency amplification
分词翻译
射频的英语翻译:
【计】 radio frequency; RF
【医】 radio frequency
放大的英语翻译:
blow up; enlarge; let out; magnify; microscope
【计】 enlargement; zoom out
【化】 amplification; scaling-up
【医】 amplification; magnification; magnify
翻译例句
1. 调制管转移射频放大器中的电流。
The modulator tube diverts current from the RF amplifier.
2. 本文在前人的基础上分别提出电光调制器自动偏置控制和射频放大器自动增益控制方案。
In this paper, on the basis of our predecessors, I proposed separately by electro-optic modulator automatic gain control and automatic bias control program.
3. 在发送方向,收发信机向功率放大器提供射频信号,功率放大器根据给定调制类型的增益和斜坡信息对信号进行放大。
In the transmit direction, the transceiver provides RF signals to the power amplifier, which amplifies the signals based on gain and ramp information for a given modulation type.
4. 作者的解决这个问题是使用可调谐射频前置放大器这也渠道作为一个低通滤波器调谐88-108兆赫时,低端的带异国情调的地方大部分的谎言。
The author"s solution to this problem is to use a tuneable RF preamplifier which also acts as a low pass filter when tuning the low end of the 88-108 MHz band where most of the exotic channels lie.
5. 射频前端接收芯片实现GPS信号的接收、放大、滤波和下变频,其中最重要的是对GPS信号进行下变频转化为数字中频信号。
RF front end receives, magnifies and filtrates the GPS signal, and above all, converts it down to IF digital signal.
6. 智能天线子系统中,射频前端模块包括线性功率放大器,低噪放大器,检测控制电路。
In intelligent peripheral subsystem, Radio Frequency Front Modules include linear power amplifier, low noise amplifier and detection control circuit.
7. 功率放大器(PA)和低噪声放大器(LNA)模块是射频(RF)混合集成电路的重要组成部分。
Power amplifier (PA) and low noise amplifier (LNA) modules are important components of RF hybrid IC"s.
8. 在现代功率测量中,射频脉冲峰值功率的测量广泛应用于如发射机的发射功率、微波接收机的灵敏度、放大器的增益等测量方面。
In modern power measurement, the measurement of the pulse of radio power has been widely used as the transmitter power, the delicacy of microwave receiver, the plus of amplifier and so on.
9. 所设计的射频2W线性功率放大器是基于负载线匹配原理,采用功率回退法技术。
The 2W linear RF Power Amplifier in this paper is designed in Feedback method, based on Loadline Theory.
10. 随着无线通信技术的飞速发展,射频功率放大器起着越来越重要的作用。
With the rapid development of wireless communication, RF power amplifier plays the very important role.
11. 射频功率放大器的主要功用是放大射频信号,并且以高效率输出大功率为目的。
The primary function of RF power amplifier is to amplify the RF singal with high efficiency.
12. 在WCDMA等宽带通信系统中,射频功率放大器记忆效应明显,传统的无记忆预失真技术无法达到理想的线性化效果。
In broadband communication systems, such as WCDMA, memory effects of RF power amplifiers (PAs) are significant and memoryless predistortion techniques cannot linearize PAs effectively.
13. 探讨如何进行射频载波抵消以及检测放大器互调失真信号。
How to cancel carrier and detect the intermodulation distortion signal of power amplifier will be discussed.
14. 同时,软件无线电为射频功率放大器的设计提供了新的技术途径。
At the same time, SDR provides new techniques and methods for the design of power amplifiers.
15. 结合射频E类功率放大器的结构特点,采用CMOS工艺,达到了在大的输出功率范围内保持持续稳定高效率的目的。
The controller combines parallel amplification and drain modulation of the CMOS class-E power amplifier to provide high efficiency over a broad range of output powers.
16. 根据功放的实测AM-AM、AM-PM特性,采用时域分析方法,并应用带通非线性理论和数字信号处理技术,分析了宽带数字调制信号激励下的射频功率放大器非线性失真特性。
The method is based on AM-AM?AM-PM characteristics of a nonlinear power amplifier and application of band -pass nonlinearity theory and digital signal processing techniques.
17. 相对论速调管放大器辐射频率的可调性还取决于提取腔的设计。
The radiation frequency tunability of the relativistic klystron amplifier still depends on design of the extract cavity.
18. 子电路包括低噪声放大器、射频滤波器、混频器、驱动放大器、功率放大器、中频滤波器等。
The subcircuits consist of the low noise amplifier, RF filter, mixer, driver amplifier, image filter, power amplifier, transmit-receive switch and if filter and so on.
19. 新的设备具有的LDMOS的射频带宽的两倍,这样,一个功率放大器(PA)的可支持多个工作频率。
The new devices have twice the RF bandwidth of LDMOS, so that one power amplifier (PA) can support multiple operating frequencies.
20. 用途:用于射频,高频放大。
Purpose: RF, HF Amplifier applications.
21. 驱动放大器放大信号到一个可以接受的输入量级以驱动功率放大器,放大后的射频信号被传送到天线分离滤波器进行滤波,最后通过天线发射出去。
The driving amplifier enlarges signal to reach an adaptive level in order to drive the power amplifier. The enlarged signal is delivered to a filter and transmitted through an antenna.
22. 本文提出一种线性化射频多载波高功率放大器的自适应射频预失真器。
This paper presents an adaptive RF predistorter to linearize multi-carriers power amplifiers.
23. 收发信机可接收基带数据和控制信息,以及向功率放大器提供射频信号。
The transceiver may receive baseband data and control information and provide RF data to the power amplifier.
24. 射频功率放大器总是工作在大信号状态下,它所用的放大器件和电路设计方法都不同于小信号放大器,导致了功率放大器的设计难度较大。
RF PA almost working in large signal, so it"s circuit design methods and transistor used are different from microwave small signal amplifier, these will led to RF PA design become more difficulty.
25. 由于射频功率放大器在军事和个人通信系统中的地位非常重要,使得功率放大器的研制变得十分重要。WWw.WeNTIyI.cOm
RF PA have become very important in the military and personal communications system, and it becomes extremely important to develop the RF PA.
26. 由于射频功率放大器在军事和个人通信系统中的地位非常重要,使得功率放大器的研制变得十分重要。
RF PA have become very important in the military and personal communications system, and it becomes extremely important to develop the RF PA.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
