铸造性用英语怎么说,铸造性的英文翻译


词语导航

基本信息

词语:铸造性

繁体:鑄造性

拼音:zhù zào xìng

英语翻译

【机】 castability

相关词条

1.castability  

分词翻译

铸的英语翻译:

casting; founding

造的英语翻译:

build; concoct; create; educate; fashion; go to; invite; make

翻译例句

1. 物理及机械性能上有极佳的平衡,亦拥有优良的铸造性,适合于大部份压铸件。

No. 3 Having excellent balance of desirable physical, mechanical properties and superb castability. Almost suitable for any die-casting component.

2. 我们高压锅炉管的技术人员说钢的铸造性能主要由铸造时金属的流动性、收缩特点、偏析倾向等来综合评定。

Our technical staff of high pressure boiler tube steel casting properties that mainly by casting metal liquidity, shrinkage characteristics, segregation orientation to comprehensive evaluation.

3. 美国官方铸造的黄金纪念章也强调了人民拥有黄金权利的重要性。

The minting of U.S. gold medallions hasemphasized the importance of the people"s right to own gold.

4. 灰口铁--一种铁碳和硅的合金;易于铸造;在铸态下具有很好的压力紧固性。

Gray iron--an alloy of iron carbon and silicon ; easily cast; good pressure tightness in the as-castcondition.

5. 包括为商业性的船舶业提供制造重力铸造锌、铝阳极。

This included the manufacture of gravity cast zinc and aluminum anodes for the commercial Marine industry.

6. 设计改进分三个阶段,即局部几何性应力集中改进、提高铸造质量的纯工艺改进和锻焊组合结构抱轴箱体的设计。

Design improvement is in three stages partial, geometrical stress concentration improvement, pure casting technology improvement and a forge-weld box body design.

7. 这一造物区域中的一切,没什么是曾被铸造在未来回家的可能性当中的,唯有爆炸。

Nothing in this region of domain was cast with any future of returning anywhere; only imploding.

8. 通过正交试验,研究了各因素对真空实型铸造铸钢件涂料的透气性、干强度、剪切力、悬浮性的影响。

In this paper, the influence of various parameters on suspension shearing dry strength and permeability of EPC coating used on steel casting through right Angle test was studied.

9. 呋喃树脂砂用于铝合金铸造时,特别是对于一些大型、薄壁铝合金铸件,型芯的溃散性较差。

Furan resin sand is poor in collapsibility when it is used for al alloy casting, specially for some large, thin section castings.

10. 调查研究某铸造作业和采石作业生产性粉尘成分的元素含量。

Objective Research element composition of producing power in foundry work and quarry work.

11. 氮化钛涂层可降低牙科铸造合金,尤其是贱金属合金的腐蚀倾向,提高其耐蚀性。

Titanium nitride coating can decrease corrosion tendency and improve corrosion resistance of dental casting alloys, especially of non precious alloys.

12. 根据计算机模拟结果和辙叉心轨的几何形状的特殊性,确定了辙叉心轨的铸造工艺方案。

According to the calculated results and the geometry of frog, the casting process was determined.wWw.wEntIYI.cOm

13. 结果表明,AM 60 B镁合金在铸造过程中具有明显的遗传性。

The results showed that AM60B magnesium alloys has an evident heredity in casting.

14. 指出合理的挤压铸造工艺可细化合金显微组织,提高铸件致密性,改善合金力学性能。

It is pointed out that the rational squeezing casting technology can refine microstructure and improve the component compactness as well as the mechanical properties of alloy.

15. 对铸造硅砂的选择性激光烧结进行了试验研究。

Selective laser sintering of foundry silica sands was investigated by experiments.

16. 通过一典型产品的消失模铸造生产工艺,系统地阐述了复杂型消失模铸造产品研发的一般性工作程序。

This article states a common working program of complicated lost foam product development systematically, through the medium of a typical model of lost foam casting production.

17. 挤压铸造是一种先进的机械零件液态成形技术,具有工艺适用性好、工艺出品率高、机械化程度高、生产率高、劳动条件较好等优点。

Squeeze casting is an advanced liquid formation technique for machine parts, and has the advantages of high adaptability, high efficiency, high mechanization degree and good work condition.

18. 对铸造锌合金锭市场进行了分析,对铸造锌合金锭品质进行了评价,同时对我国生产铸造锌合金锭企业提出了建设性意见。

The market of cast Zn alloy ingot was analyzed and its quality was evaluated. The constructive suggestion to cast Zn alloy ingot enterprises in China was proposed.

19. 找出国产榨辊比外国榨辊耐磨性低的原因主要是铸造与熔化水平低,铸件内在质量差造成的。

They have found a main reason of poor abrasion resistance of the first cane mill roller is due to its poor casting quality during melting and casting.

20. 镁合金密度小、粘度低、流动性好,很适合于反重力铸造。

Magnesium alloy with lower density, lower viscosity and excellent liquidity is suitable for anti-gravity casting.

21. 牵引梁为薄壁、内空箱体整体铸造构件,铸件容易出现搓扭和弯曲无规律性变形。

F draft sill is an integrated casting component with thin wall and inner empty box, and irregular deformations like torsion and bending occur easily.

22. 国产125MW汽轮机由于采用加强筋整体铸造结构的高压隔板,使该型机组经济性达不到保证值指标。

Since applying whole ribbed cast-in high pressure diaphram to 125mw turbine, the unit has not attained the guarantee target in economy.

23. 本文着重研究了实型铸造工艺中振动紧实台振动参数与砂体流动性、充填性及紧实度的特性关系。

The relationship between vibration parameters of compaction table and sand fluidity, filling and compaction for EPC was researched in this paper.

24. 与锻造模具钢相比,铸造热锻模具钢虽然韧性低,但强度高、红硬性好,具有较低的缺口敏感性和较高的抗热疲劳性。

Compared with the forging die steel, casting forging die steel although toughness is low, but high strength, red hardness is good, with low notch sensitivity and high resistance to thermal fatigue.

25. 介绍了消失模铸造的优越性、所用原材料、常见缺陷、工艺技术问题,并指出了其发展前景。

The superiorities, the raw materials, the common shortages and the problems of technique of EPC are introduced, and points out its developmental prospect.

26. 从化学成分、理化性质及矿物组成方面,对粉煤灰应用于铸造涂料的可行性进行分析。

The feasibility of applying the fly ash to mold coating is analyzed from aspects of chemical composition, physicochemical properties and mineral component.

27. 目的通过改进纯钛铸造方法提高钛铸件的精确性。

Objective To investigate the method of enhancing the accuracy of titanium crowns by improving the casting method.

28. 对此方法应用于铸造镍基高温合金K417的适用性进行了分析,并提出了适用于铸造高温合金K417的寿命预测方祛。

The applicability of this method to cast nickel-base superalloy K417 is assessed and suitable life predictive methods are suggested for cast superalloy K417.

29. 因此,部分凝固铸造合金在成型加工中的潜在优越性值得重视。

It is pointed out that partially solidified cast alloy has got a potential superiority in practical forming operating.

30. 本文介绍研制的新型铸造铝合金zl305a是一种强度高,时效稳定性好,耐蚀性优良的船用新材料。

Casting aluminium alloy ZL305A is a new shipbuilding material with high strength, good ageing stability, excellent corrosion resistance.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!