薄板钢用英语怎么说,薄板钢的英文翻译


词语导航

基本信息

词语:薄板钢

繁体:薄板鋼

拼音:báo bǎn gāng

英语翻译

【机】 sheet bar

分词翻译

薄板的英语翻译:

lamella; lamina; lamination; sheet metal
【机】 lamina; laminatiou

钢的英语翻译:

steel
【化】 steel
【医】 steel

翻译例句

1. 研究了不同的样品表面处理方法对测定薄板钢样中氧的影响。

The influence of different surface treatment methods on determining oxygen in steel sheet has been studied.

2. 为了满足市场对冷轧薄板钢需求量的不断增加和连续退火工艺要求,超低碳钢生产也在不断增加。

To meet uninterruptedly increasing in the demand for the cold rolled steel sheets and to meet the technological demand of continuous annealing, the production of ultra-low carbon steel is increasing.

3. 基于薄板的弹性稳定理论,确定了在纯弯状态下空腹受弯钢构件孔口上方腹板和孔间腹板的最大高厚比。

Based on elastic stability theory of thin plate, the maximum high-depth ratio of these two kinds of web under bending is deduced.

4. 本文研究了钢的主要成分,轧制温度对磁轭薄板力学性能和磁通密度的影响。

This paper has studied the influences of chemical compositions and hot rolling temperature on mechanical properties and magnetic flux density of magnetic yoke sheet.

5. 被轧制和加工成为梁、棒、薄板的不锈钢产品,如方坯或厚板。

Stainless steel products such as blooms, billets, or slabs that are then rolled and processed into beams, bars, sheets, etc.

6. 本文用一段录像显示一个带有一定锥度的薄板坯连铸结晶器内的钢液流动在使用了电磁制动后是如何受到影响并逐渐减弱的。

A video will be presented showing how steel flow in a thin slab caster with a tapered mold is influenced and calmed down when using the EMBR.

7. 对唐钢薄板坯连铸连轧生产线与传统热轧生产线轧制工艺特点进行了对比,介绍了该生产线在带钢轧制中所采取的主要质量控制手段。

The thin slab continuous casting and rolling production line in Tang Steel is compared with the traditional process, the main quality control ways introduced.

8. 计算结果表明,钢液的紊流流动显著改变了薄板坯内温度场形状及溶质浓度的分布。

Calculated results show that the turbulent fluid flow intensively alters the shapes of temperature field and the solute distribution in thin slab.

9. 每一个火炬由不锈钢,铝和薄板成型化合物构成。

Each one is made of a stainless steel, aluminum and sheet - moulding compound.

10. 论述了落锤撕裂试验的特点、方法和标准,以及该试验在管道钢材、压力容器钢和船体结构钢薄板上的应用情况。

The features, method and standard of drop weighed tear test are described with its application in steels for pipes, pressure vessels and ship hull.

11. 从理论方面分析了薄板坯纵裂纹产生的原因。结合唐钢实际,提出了解决薄板坯纵裂纹的措施。

The causes and affecting factors of continuously casting thin slab are analyzed theoretically, the precautions are proposed according to the conditions of Tanggang.

12. 本文就薄板坏连铸连轧生产热轧TRIP钢的可行性进行了分析和讨论。

In the present article, the feasibility of the production of hot rolled TRIP steels using TSCR process was analyzed.

13. 介绍了蜂窝体空气蓄热式燃烧技术在唐钢热轧薄板厂1810生产线辊底炉B线横移车上的应用和效果。

This article introduces the use and effect of air honeycomb regenerator at B shuttle of tunnel furnace 1810 product line of Tanggang steel company.

14. 本文主要介绍了唐钢薄板坯连铸机结晶器漏钢预报系统的功能算法。

This paper mainly introduces the mould breakout detection system function arithmetic of thin slab caster in Tang Steel.

15. 介绍了盐酸再生技术及其应用前景,唐钢冷轧薄板厂采用盐酸再生技术取得了较好效益。

The recovery technique of hydrochloric acid and its application are introduced, with it the good economic profit got in Tang Steel.

16. 利用薄板坯连铸连轧和薄带铸轧组合方案生产不锈钢可以更好地形成优势互补。

A suggestible solution is the combined production of thin slab continuous casting and continuous rolling together with strip casting, so that it will be complemental in superiority for both of them.

17. 介绍了莱钢冷轧薄板(一期)工程的主要生产工艺、设备配置及先进技术。

The main production process, equipments collocation and advanced technologies of the primary cold-rolled sheet project are introduced in this paper.

18. 分析了连铸薄板坯表面纵向裂纹的产生原因,结合通钢薄板坯生产实际情况,提出了改进措施。

The causes of surface longitudinal cracking were analyzed. Countermeasures were put forward based on the production practices of thin slab casting and rolling at Tonghua Steel Co.

19. 介绍了珠钢薄板坯连铸连轧生产线薄规格的生产情况,分析了影响薄规格生产的主要因素。

The status of thin strip production in thin slab casting and rolling process at Zhujiang steel is introduced, and main factors which affected the production is analyzed.

20. 以涟钢CSP薄板坯连铸机为例,对薄板坯连铸机漏钢预报系统的组成、功能及其软件平台作了简要介绍。

Take CSP slab continuous caster of Liangang for example, the structure, system functions and software platforms of breakout prediction system for the slab continuous caster were briefly introduced.

21. 洁净钢的生产是薄板坯连铸的关键问题。

The cleanliness of molten steel is a key factor for thin slab casting.

22. 的标准规范商业级热轧碳素钢薄板和带材(最大含碳量为0.16%-0.25%) 的标准规范。

Zinc-Coated (Galvanized) Carbon Steel Wire Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled.

23. 简要介绍了唐钢FTSC工艺薄板坯连铸的生产技术情况。

The production and technical situation of thin slab continuous casting with FTSC process in Tang Steel are introduced briefly.

24. 介绍了唐钢薄板坯连铸低碳冷轧用钢保护渣的研究开发过程。

Research and development of mould powder for low carbon steel thin slab casting specially used in cold rolling at TISCO is introduced.

25. 本钢薄板坯连铸连轧生产线在调试生产阶段,精轧机F3多次出现轧裂卡钢停产事故。

The Finishing mill F3 repeatedly occurs accidents of rolling crack and stopping steel plate in debugging production stage of thin slab concasting and conrolling production line in Bengang.WWw.wentIYi.coM

26. 不锈钢风门属薄板铸件。

Windy shutter of stainless steel is thin wall casting.

27. 中薄板坯连铸机生产低碳高铝钢过程中,浸入式水口堵塞的主要原因是水口与钢水之间产生化学作用和钢水中的氧化铝夹杂物在水口壁上沉积。

The main reason that the submerged nozzle clogged during continuous casting of high aluminum low carbon steel is aluminate that aggraded the submerged nozzle wall.

28. 中薄板坯连铸机生产低碳高铝钢过程中,浸入式水口堵塞的主要原因是水口与钢水之间产生化学作用和钢水中的氧化铝夹杂物在水口壁上沉积。

The main reason that the submerged nozzle clogged during continuous casting of high aluminum low carbon steel is aluminate that aggraded the submerged nozzle wall.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!